Sign In Join 



Ford Crown Victoria and Mercury Grand Marquis

3244 messages,  Last post on Aug 25, 2009 at 8:13 PM

You are in the Ford Crown Victoria/Mercury Grand Marquis Forum. Your Hosts are pat & karens

What is this discussion about? Ford Crown Victoria, Mercury Grand Marquis, Exterior, Sedan


Messages Page 320 of 325
1
...
317
318
319
320
321
322
323
...
325
Prev
Next
Last
Go To Msg #
Search This Discussion

#3190 of 3244
Re: thinking about a 1999 GM [lostwrench] by tismyself
Jun 19, 2008 (8:33 pm)
Reply

Replying to: lostwrench (Oct 01, 2007 5:39 pm)

Yes, the timing belt. When you are a single female who does not know very much about cars, life is very different. So, for the most part, just like Blanche DuBois, I am dependent on the kindness of strangers.
 
Now, if you want to talk engineering or architecture... that's a different story.
#3191 of 3244
Timing chains replaced on 98 P71 CV... by pigtoria
Jul 01, 2008 (10:24 am)
Reply
...and everything is hooked back up (all connectors, fuel lines, vacuum lines, etc) and triple checked. Followed Ford shop manual procedure for the work, but now the car won't start. It cranks but won't fire. Vented fuel rails and they are full. The fuel pump is working. I am lost. Is there some kind of "reset" sequence that I don't know about? Could it be the crank sensor? It worked when I took it out and cleaned it, I even checked to make sure it was a good complete circuit before I re-installed it. please advise...
#3193 of 3244
figured it out... by pigtoria
Jul 03, 2008 (7:45 am)
Reply
Finally ended up chasing all the wires and found the pins for the crank position sensor were pushed out of the big connector at the brake booster. hope this might help someone
#3194 of 3244
Re: figured it out... [pigtoria] by euphonium
Jul 03, 2008 (9:42 am)
Reply

Replying to: pigtoria (Jul 03, 2008 7:45 am)

Thank you for sharing the solution. We who follow these posts appreciate such communications. Good Job!
#3195 of 3244
FED UP by knilgnissim
Jul 03, 2008 (11:54 am)
Reply
I have a white 94 Grand Marquis, the car ran perfect until it started with a light tremble between 35-45 mph.I changed the oil, oil filter, gas filter put new spark plugs nothing helped then i put new spark plug cables, and everything was alot better, but still a light tremble, it goes away when I step on the gas, but its coming back, it almost seems like its burning the cables too quickly, or I dont know maybe something with the transmission, I honestly dont recall when was the last time they changed the trans oil, i know its not as often as it is for the motor oil. dont know, but would like to;cause im FED UP with these mechanics that charged my mom $500 for changing I dont know what the heck. If anybody has any idea or tips Id really appreciate it. thanks
 
-VIC
#3196 of 3244
Steering lock by ionosphere1
Jul 03, 2008 (12:28 pm)
Reply

Replying to: knilgnissim (Jul 03, 2008 11:54 am)

I have a 2008 Mercury Grand Marquis. This is the first car I can remember owning where the steering wheel does not lock into position after parking. My understanding is that it used to have this feature, but it was eliminated. Anyone know why?
#3197 of 3244
Re: FED UP [knilgnissim] by der_wahnsinn
Jul 03, 2008 (7:38 pm)
Reply

Replying to: knilgnissim (Jul 03, 2008 11:54 am)

sounds like your experiencing the classic transmission 'shutter'. Change your tranny fluid with mercon v and that should fix your problem. It did for me, used to surge between 30-40. Here is how to do it
#3198 of 3244
Re: FED UP [knilgnissim] by euphonium
Jul 04, 2008 (9:30 am)
Reply

Replying to: knilgnissim (Jul 03, 2008 11:54 am)

I Second the suggestion to change the tranny fluid, filter, & remember to drain the torque converter. Mercon V is the most expensive, but it lasts longer.
#3199 of 3244
1998 Grand Marquis Rough Idle by jcro
Sep 02, 2008 (5:04 pm)
Reply
My wife and I recently inherited this car from her parents. It ran great until a couple weeks ago when it had a rough idle. It only lasted for one trip in town and ran fine the next day. A couple days ago it began to idle rough again. The check engine light came on and it soon had a strong sulfur type smell. I'm not at all familiar with this car and I'm wondering if there is something fairly obvious I should be looking for. Any ideas? Thanks for any information.

Messages Page 320 of 325
1
...
317
318
319
320
321
322
323
...
325
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement