Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Ford Crown Victoria/Mercury Grand Marquis Ford Crown Victoria and Mercury Grand Marquis
3244 messages, Last post on Aug 25, 2009 at 8:13 PM
You are in the Ford Crown Victoria/Mercury Grand Marquis Forum. Your Hosts are pat & karens
| Here, here!!!!...plus all the other "minor" improvements cited earlier... | |
| http://www.edmunds.com/insideline/do/Articles/articleId=104825 | |
| I was driving my 1993 Crown Vi , I heard A chirp sound then my car died. I have checked the battery & starter both are ok. When I try to turn it over I get a single click then nothing. | |
|
|
| No posts in 10 days. All drivers must be content with their Crown Vics and Grand Marquis'. I am. But then, maybe everyone got rid of them. Hmmmmmm. | |
| It could be the solenoid going bad, especially if the click is rather loud...when I used to work on cars years ago (and it may still be accurate for Fords in the 90s) Ford vehicles were the only American cars with the starter solenoid mounted on the fender well off the starter...GM and Dodge were always mounted directly on the starter...anyway, because of the way the Ford starter worked, the voltage required was always more than GM or Dodge...in other words, if the battery was down to, say, 10 or 10.4 volts, a GM or Dodge would crank and the starter would work...but any Ford product would require (if memory serve me correctly) at least 11 volts to engage the solenoid, or else you would just hear a loud click...what was so deceiving was that the battery would "check out" OK, but if it was right on the edge, the starter would not engage or crank...it was usually a good predictor of either the alternator on the verge of going bad or a battery on the verge of going bad, but either system would work for months in a GM or Dodge product, only Ford with the remote solenoid was that sensitive to a drop in the voltage or cold cranking amps in the battery...check it out more thoroughly...Fords are quirky that way... | |
|
|
|
It might be worth either jumping the car, or taking the battery out and getting it load-tested. If I was a betting man, I would guess the battery, since it cannot turn over the starter. If the battery checks out, I say it might be time for a tow. Crown Vics are pretty simple cars, so it shouldn't be terribly expensive. The key is to find a good, honest mechanic. On the starter solenoid, the pro of having it on the fender is it is much easier to replace than attached to the starter. |
|
|
Could Ford alter the Panther platform to incorporate an AWD option, or would that necessitate moving to a stretched "500" platform, like one link said the company is planning to do with the TC? I don't know if they'd want to steal any thunder from the 500, but if it were possible to modify the Panther platform so that they could squeeze 2-3 more inches in to the backseat area it would really be an upgrade for the car. The folks talking about inserting the 300 HP engine from the Mustang are hitting that on the head. Ford's V-8's are trumped by many competitiors V-6's. Diamler-Chrysler and GM are showing that engine technology exists that can help get a few more MPG in highway mileage situations...where is Ford on this front? Final thought...With the discussion of hybrid technology ever increasing, is it possible to incorporate THAT into the CV/GM/TC set-up? I've read before the engine bay won't accomodate the 5.4L engine from the F-150, but could a battery be installed that would help with fuel economy/total engine power and possibly "introduce" this car to a new market of consumers??? If not the engine bay, perhaps the top shelf of the trunk...Honda has put their battery for the Accord in the trunk, so it's not exactly unheard of. Just a few rants/thoughts from a guy that owns a 98 Regal GS and would like to buy a CV/GM...albeit with a few modifications  Thanks... |
|
|
Mostly in warm weather, when accelerating at low speed, I get what I think is spark knock in my 2003 GM. Dealer looked at it and made some parts changes in the computer which he said were part of a technical service bulletin advisory. Still getting the knock (like marbles rolling around). Should I move up to a higher octane or seek to have timing adjusted? I don't mind using a higher octane but I don't want to mess up the computer setting. Is the moderate knocking seriously harmful?
|
|
|
|
|
Replying to: gene42 (Mar 14, 2005 5:24 pm) |
|
|
I experienced a tie-rod failure on my '99 GM with 124K miles. Given the number of miles on the vehicle, the failure of any component can not be considered unusual. The reason I am posting this event is not that the tie-rod failed, but rather the way it failed. I drove this car since it was new and when I drove to work on Monday the vehicle handled as well as when it was new. On my way home the tie-rod end failed. Like a light bulb failure - no warning except for a few unusual steering feedback occurrences (like low tire air pressure) in the final three miles. In the past my vehicles have always shown signs of front end part wear for many miles before I had parts replaced. I have never experienced an actual front end component failure before this. Is the rather sudden failure of my tie-rod end a freak occurrence?
|
|
You are here:
Forums
Sedans Ford Crown Victoria/Mercury Grand Marquis Ford Crown Victoria and Mercury Grand Marquis
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Ford Crown Victoria
2010 Mercury Grand Marquis
Browse by Board
Browse by Topic
Today's Chats
