You are here: Forums Sedans Mazda 626 Mazda 626

Mazda 626

2018 messages,  Last post on Oct 09, 2009 at 1:07 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda 626, Sedan

Messages Page 83 of 203 1 ... 80 81 82 83 84 85 86 ... 203 Prev Next Last

Go To Msg # Search This Discussion

#817 of 2018 I agree by maltb Aug 27, 2001 (12:55 pm)
The Ford trannys really know how to waste the power that's given to them, so any other make of trans is an improvemnet. The 4cyl from those who know say it's a great motor. We'll see how it does in the truck and Trib.
#818 of 2018 csuftitans... by jstandefer Aug 27, 2001 (1:05 pm)
Don't hold your breath on that one... Like I said before, the engine will be the 3.0L DOHC V6 Duratec outfitted with Mazda's S-VT (Sequential Valve Timing) and should output between 210-220hp. On a good note, the 3.0L Duratec is a world class engine and one of the few things Ford has done right in the past few years. The 2.3L DOHC 4-cyl Duratec will see use as the base engine in the 626, Tribute, B-Series, and Protege, as well as the Ranger, Escape, and Focus. It was a joint design with Mazda and Ford and will be built in the U.S. by Ford, Japan by Mazda, and Europe by Ford.
#819 of 2018 Numeric Naming... by jstandefer Aug 27, 2001 (1:06 pm)
I miss the numeric naming Mazda used. 323, 626, 929, MX-3, MX-5, MX-6, and RX-7... Ahhh, those were the good days and the best times for Mazda.
#820 of 2018 by ateixeira Aug 28, 2001 (5:27 am)
So, Mazda must have gotten a shot at reengineering that Duratec. Ford was making 200hp from that mill.   For whatever reason, the 3.0l Duratec (Taurus, Tribute) has been better than the 2.5l Duratec (Contour, MPV), so I say drop the 2.5l and beef up the 2.3l 4 banger.   The idea of cars sharing an engine with a truck doesn't sound so good, though.   -juice
#821 of 2018 Duratec 3.0 V6 by csuftitans Aug 28, 2001 (8:56 am)
Ford's Duratec V6 is not as smooth as Mazda's 2.5V6. When I test drove a V6 Tribute, the engine was harsher and louder than Mazda's 2.5V6. While the power of the 3.0 duratec is very good and pull the tribute very nice, Mazda and Ford better revised that engine for a sedan. I used to own a '93 626 ES and the engine was smoother and quiter than the duratec V6 on the tribute. Maybe it's because I'm driving an SUV, without much sound dampening and other stuff to reduce NVH, and I've never driven a Taurus with the same Duratec V6 in it. Anwyay, I'm still hoping that Mazda will provide those 3.0 V6 for the upcoming 626.
#822 of 2018 What about a 2003 626 coupe? by dayokayode Aug 28, 2001 (9:26 am)
Although cute wagons (like Protege5) are currently in, it would be nice to see a 626 (or whatever its successor will be called) 2-door coupe. I currently drive a 2000 626lxv6 and would have gotten a Mazda coupe, if it was available. This will further increase Mazda's share. I still see a lot of Mx6s on the road; even after all these years, they still look good and sporty. I just don't care too much for the boxy and bland Honda Accord Coupe and Toyota Solara.   Since we're all dreaming, what about a special edition of the 626 (25+ or 30+ year anniversary edition) with more hp (jstandfer's 280hp), more aggressive looks etc?
#823 of 2018 Duratec... by jstandefer Aug 28, 2001 (10:51 am)
The 3.0L DOHC Duratec V6 is used quite often in the Taurus and is also used in the Lincoln LS and Jaguar S-Type. The engine was originally designed for a sedan, and was later put into the Tribute and Escape, but of course, those two SUVs sit on a 626 platform. In the Taurus, Lincoln, and Jaguar, the 3.0L Duratec is very quiet and smooth. It's not quite to the levels of the Mazda 2.5L, but neither are most V6's. Unfortunately, the 2.5L is too small to remain competetive now, as the Taurus, Accord, Camry, Altima, Stratus, Malibu, Galant, Grand Am, and Jetta all have larger engines. The MPV will get the 3.0L Duratec for 2002 as well. The 2.3L Duratec 4-cyl will be the base engine for the 626 and Tribute.   dayokayode... I would love to see a special edition 626!! However, I wouldn't count on one as 2002 will be the last year of the 626 and I'm sure Mazda would be better off spending the money on the replacement. But, with Mazda you never know what to expect!! It would be nice to see an MPS (Mazda Performance Series) version of the 2002 626 with the Millenia's 210hp/210lb-ft 2.3L DOHC Miller-Cycle V6 with suspension upgrades and a slight body kit...
#824 of 2018 i thought by qbrozen Aug 29, 2001 (4:44 am)
i had read that they WERE going to make an MPS 626. I've actually seen it mentioned in a couple of different places as a sidenote to the MP3. But, who knows.   Hey, I'd be happy just to see a Millenia S (or an equivalent) with a stick. I'll take care of the other add-ons if I need to.
#825 of 2018 by ateixeira Aug 29, 2001 (5:20 am)
I dunno, the coupe market is pretty flat. The money's in sedans, sport wagons, and SUVs.   As much as like the Miller Cycle engine, US customers don't know enough about it. Mazda has spread itself too thin.   -juice
#826 of 2018 Next 626 by tomd13 Sep 04, 2001 (6:07 am)
Hi,    Correct me if I'm wrong, I hear the next 626 is going to be built on the Mondeo platform. This was used for the contour which was a sleeper as far as handling is concerned. The mondeo is a good seller in europe and having drove a contour I think this bodes well for 626, I hate to see the V-6 KE go away lets hope the next power plant is mazda design. If you want to read about the KE-KL 2.5 V-6 engine go to:http:/www.highlandsun.com/hyc/sae9206677/   Tom

Messages Page 83 of 203 1 ... 80 81 82 83 84 85 86 ... 203 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Mazda 626 Mazda 626