Last post on May 08, 2012 at 4:17 PM
You are in the Mazda 626
What is this discussion about?
Mazda 626, Sedan
#387 of 2044 Keyless entry programming
Dec 18, 2000 (3:43 pm)
I recently bought a 1999 Mazda 626 from the Hertz car sales. It is in great condition but I have a small problem. The Hertz guys buy directly from the factory and they have never programmed the keyless entry modules that come with the car. They have given me 2 brand new keyless entry modules and a flow-chart with instructions on how to program the keyless entry modules but no matter how many times I try to read and try, it does'nt seem to work. Has someone else gone thru the same experience, if yes or if you know anything about programming the keyless entry modules for the 1999 Mazda 626 LX, I am interested in hearing it.
Thanks in advance
#388 of 2044 Reprogramming the remote
Dec 18, 2000 (4:54 pm)
I've never seen a procedure for that anywhere. Assuming the system is functional, it might be easier to pay a Mazda dealer the forty bucks or so and be done with it.
If they gave you a handout on how to do this, I'd really like to see it.
#389 of 2044 Reprogramming the remote
Dec 19, 2000 (10:53 am)
Yeah, the Hertz folks gave me a nice flowchart which has a relatively precise set of instructions and I just followed them verbatim (I think ) and it would not work. It is an interesting procedure and I just wanted to try it out. Well, I'll just take it to the dealer and have them fix it. I have a hard copy of the flow-chart, if you have a fax, i could send it over.
#390 of 2044 West Central IL Snow
Jan 02, 2001 (9:25 pm)
We're making history here(most snow in Dec)by
thrashing the 1887 record by a coupla inches.
I'm getting better with the power curve and
luvin' every minute!I had a set of stainless
steel mud flaps made,attached with ss hardware
and they looked sweet.I'm bummed now after
noticing rust stains on the flaps.What could
it be?? Body clips are made of steel!!!
Back to the drawing board.
#391 of 2044 99 Mazda 626 ES 4-cyl E-mail JEgan98@aol.com
Jan 06, 2001 (11:43 am)
I own a Honda CR-V so I spend most of my time there but need your help on a 626 that my father is buying. It is a 1999 Mazda 626 ES 4-cyl with a moonroof and leather it has the cd/cassette and all the other es goodies such as the PW/locks/Cruse Tilt. The car has 41K on it and it is in Great Shape. I saw this vehicle. This was a early lease turn in and was well taken care of He has put down a deposit and will probally pic it up Monday.
The price is $13,400 and they are also giving him a good value for the trade. What do you all think of this vehicle. THe color is driftwood/tan leather which is spotless
Jan 06, 2001 (2:26 pm)
Of course, my "What would have led someone to terminate a lease early?" buzzer goes off, even knowing there's 41k on the car.
Would someone please pull the dipstick on the automatic transmission (you can't get ES trim with a four-cylinder and the stick) and see what the fluid looks like?
#393 of 2044 Torque and HP curve 2.5L V6
Jan 12, 2001 (11:06 am)
Does anyone know where can I find a Torque and HP curve graph for mazdas 2.5L V6 engine? Thanks
#394 of 2044 11,300 on Our Doubleought LX
Jan 14, 2001 (8:14 am)
Our mechanic has been changing the oil at 3000mls
and making visual inspections on the Freeport.If
we take this to the Mazda dealer(40mls away)will
they make any internal diagnostic tests that our
trusted tech is not set up for or will those come
later with more mileage?
Jan 17, 2001 (7:25 am)
Much later. The first significant service is at 30k miles, and even that is minor compared to the 60k mile service (the first major one).
#396 of 2044 2001 Mazda 626 Dealer Demo
Feb 04, 2001 (1:49 pm)
A local dealer will sell me his 2001 626 demo vehicle with 4,000+ miles for $100.00 over invoice. I haven't purchased a "new" car in many, many years, but this doesn't seem correct given the amount of use/depreciation on this vehicle.
I'm sure if I bought a 2001 vehicle and ran up 4,000 miles and tried to turn it back in that they wouldn't give me invoice plus $100.00. HElP!! What would be a fair, reasonable discount for the amount of miles this dealer demo has??