Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Mazda 626 Mazda 626
2018 messages, Last post on Oct 09, 2009 at 1:07 PM
You are in the Mazda 626 Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: chuck1 (Jan 18, 2006 9:16 pm) Thanks alot, Casey
|
|
|
Replying to: caseysdubs1 (Nov 24, 2006 11:00 am) |
|
|
|
|
anyone have a link to the stereo wiring ? My 1995 626 has had the wires chopped off and I need to put in an aftermarket unit. thanks, Limbo
|
|
|
|
|
Replying to: limboandlisa (Jan 14, 2007 1:50 pm) L/H door speaker, blue with yellow tracer and red with blue tracer R/H door speaker, blue with black tracer and blue with orange tracer L/H rear speaker, green with black tracer and green with orange tracer R/H rear speaker, solid green and yellow with green tracer constant power wire is blue with red tracer acc power wire 'KEY ON" is blue with white tracer black is ground power antenna wire is yellow with red tracer I hope this helps.
|
|
|
|
|
Replying to: vantagemotors (Jan 14, 2007 3:38 pm) |
|
|
My car doesn't seem to be getting any gas. When you press on the gas the car just barely putts along. We replaced the fuel filter, but it didn't make a difference. Someone told us we need to replace the Emission Switch? Can someone tell me what exactly that is and is it something we could replace ourselves. Any help is appreciated. Thanks.
|
|
|
Replying to: ajhugs (Feb 22, 2007 2:11 pm) The fuel filter was a good guess but it may be something else that's clogged or your fuel pump is failing. |
|
hey my name is rob i just bought a 97 mazda 626 it has 127,000 miles on it it had a blown head gasket so i refurbished the head at a performance shop. i found the antifreeze leak it was the water pump so while replacing the water pump i replaced the timing belt and fired her up she started. i brought it to work and ran a diagnostic it came up with camshaft alignment sensor ( the ditributor) o2 sensor ( the one on the exhaust manifold not the down pipe) so i replaced the distributor, cap, rotor, plugs, and wires. the o2 senor ( i got it from a ford probe rather spend 7 bucks than $171 ) and it has a smooth idle but it is very sluggish under acceleration i believe the i am pushing the gas pedal way to far down to get the rpms where they are as well as at one point when i gave it gas more than half throttle it did not accelerate at all! if anyone has any tips or tricks please drop me a line this is my second 626 2.0 and i love it so iam not gonna give up on it my next step is a new airfilter checking for any inake manifold leaks and the fuel system it was sitting there for some time before i bought it
|
|
|
Replying to: r0b (Mar 10, 2007 4:39 pm) |
|
| Has anyone done this to their 626 and if so, could you pass on your recommendations or directions? I know it's possible, but the path I was taking lead to a dead end. | |
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2002 Mazda 626
Browse by Board
Browse by Topic
Today's Chats
