You are here: Forums Sedans Chevrolet (Geo) Prizm Chevrolet (Geo) Prizm

Chevrolet (Geo) Prizm

1322 messages,  Last post on Dec 06, 2009 at 2:12 PM

You are in the Chevrolet (Geo) Prizm Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Prizm, Geo Prizm, Sedan

Messages Page 133 of 133 1 ... 127 128 129 130 131 132 133 Prev Next Last

Go To Msg # Search This Discussion

#1313 of 1322 Re: Starting problems and Seat Belt Light/Warning bell [nickrusche] by nickrusche Oct 08, 2009 (7:01 pm)
Replying to: nickrusche (Oct 03, 2009 10:37 pm) Turns out it was the starter shorting out.
#1314 of 1322 Broken inside door handle by keithh1 Oct 16, 2009 (11:02 am)
My son broke the driver's inside door handle on my Prizm. Apparently this is a very common occurrence so I thought I'd post my fix. What happens is the weak plastic posts that the pull handle is attached to, and pivots on, snap. So I drilled out what was left of the posts, top and bottom of the body that holds the pull handle, and replaced the two posts with a single 1/8"x1 1/2" (approx) bolt and nut. I had to dremel out the outside ends on both sides of the plastic holder so the nut head and the bolt head would fit, but it worked. I used a dab of superglue on the nut to make sure it wouldn't gradually work loose. I have pictures if anybody wants to see them. I already had the nut and bolt, so $0.00 fix. The local junkyards didn't have any Prizm door handles (all sold out). I could get a new one for only $10.95... but shipping was another $9.00... Anyway, I hope it holds up for another 11 years. Keith 1998 Chevy Prizm
#1315 of 1322 1999 Geo Prizm by drstar10 Oct 22, 2009 (11:00 am)
I am looking for tail lights, hood etc. and not sure what other models if any interchange with this car. Appreciate any help on this. Replies to this message: wademeister (Nov 14, 2009 10:15 pm)
#1316 of 1322 Re: 1997 Geo Prism check engine light [elmo1945] by wademeister Nov 14, 2009 (10:12 pm)
Replying to: elmo1945 (Jan 05, 2007 12:46 pm) This isn't something you can do by yourself, however if you go to a local auto parts store (Napa, Auto Zone, Advance Auto Parts, etc) they can hook up to the car's computer and find out what's wrong, as well as clear the codes so that your "check engine" light will turn off
#1317 of 1322 Re: 1999 Geo Prizm [drstar10] by wademeister Nov 14, 2009 (10:15 pm)
Replying to: drstar10 (Oct 22, 2009 11:00 am) If yours is a four-door sedan, you should also be interchangeable with the four-door Toyota Corolla. I cannot think of any others models off-hand, but that should get you started at least.
#1318 of 1322 1995 geo prizm cup holder by bm7yu Nov 29, 2009 (7:44 pm)
I had my radio stolen out of my 1995 geo prizm, but the really unfortunate thing is that they ripped out the cup holder too. So, I'm looking to get a new one- I hear the corolla has the same interior, and would have the same cup holder. Is this true? I'm seeing a bunch of different looking ones on ebay- anyone happen to have a 1995 prizm they could take a picture of, so I could look at what exactly the cup holder looks like? One of those things you don't notice until it's gone... Replies to this message: geoblue (Nov 30, 2009 2:23 pm)
#1319 of 1322 Re: 1995 geo prizm cup holder [bm7yu] by geoblue Nov 30, 2009 (2:23 pm)
Replying to: bm7yu (Nov 29, 2009 7:44 pm) http://cgi.ebay.com/ebaymotors/93-97-Corolla-Prizm-Front-Dash-Pop-Out-Cup-Holder- -94-95_W0QQitemZ160381362574QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessorie- s?hash=item255779618e#ht_500wt_1182   Here, you should get only Geo Prizm's cup holder, not Corolla's. They are not the same. 1993-1997 Geo Prizm cup holder.
#1320 of 1322 re: cup holder by bm7yu Dec 01, 2009 (6:37 pm)
Thanks for the quick reply! Found one!
#1321 of 1322 Re: noise when running in gear with 2002 Prizm [jerrynelse] by marked1 Dec 06, 2009 (1:29 pm)
Replying to: jerrynelse (Jan 22, 2009 5:22 pm) Your gasket between exhaust manifold and exhaust pipe is probably worn out. This gasket looks like a fat ring made of metal mesh. the part costs about 5$ at aftermarket store. I've replaced it on my brothers prizm.
#1322 of 1322 Re: 2001 Prizm Boken Drivers Door Handle [prizmguy01] by marked1 Dec 06, 2009 (2:12 pm)
Replying to: prizmguy01 (Apr 26, 2007 6:32 pm) It't not too hard. Remove two or three phillips screws that you see in the panel. Make sure you didn't miss any. Starting from the bottom pry the panel off and continue to pull toward your self holding the bottom portion of the panel. There are about 10 clips total that hold it located on sides. When the clips are off lift the panel up to pry off upper panel side. Disconnect by prying off a rod cable from the door handle.

Messages Page 133 of 133 1 ... 127 128 129 130 131 132 133 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chevrolet (Geo) Prizm Chevrolet (Geo) Prizm