You are here:
Forums
Sedans
Chevrolet (Geo) Prizm
Chevrolet (Geo) Prizm

1322 messages, Last post on Dec 06, 2009 at 2:12 PM
You are in the Chevrolet (Geo) Prizm Forum. Your Hosts are pat & karens
|
|
|---|---|
|
am i the only one with a prizm that scrapes over speed bumps? is there any way to fix this? ((1990 prizm)) |
|
|
Replying to: mazda6iguy (Mar 14, 2007 10:51 am)
|
|
|
|
|
the other day my raido stoping working and now it says err.- dose anybody know how to fix this. |
|
|
|
|
Replying to: jad789 (Apr 06, 2007 3:15 pm) |
|
|
|
I need some help changing the door handle inside on the driver's side. Has anyone removed the inside door panel? I want to switch the rear passenger door handle with the front. The handle is the same. The handle broke in half...very cheaply made. I've already changed the driver's seat because the weld on the back of the seat broke. Also the mileage has decreased drastically. After the catalytic converter was changed, mileage went from upper 30's to upper 20's to low 30's. It's crazy!! Any help would greatly be appreciated!! Thanks
|
|
|
I also have a broken handle-inside driver's door. Not sure how to remove door panel either. Like prizmguy I also thought of switching the back one to the front. Because I'm no longer thrilled with rolling the window down to get out of car. |
|
| I would like to add a tach. I don't want to remove the dash and put in a LSI dash. Too much wiring. I was thinking about the 'A-pillar' gauge pods. Do they sell them for our cars? If so, who has them? | |
I just bought a 1994 LSI and the speedo does not work the needle just bounces between 0 and 20 mph. Does this car have a cable or is it an electronic speedo? I have not had a chance to tear apart the dash to see behind the gage cluster.
|
|
|
Replying to: cob (May 02, 2007 8:10 am) |
|
You are here:
Forums
Sedans
Chevrolet (Geo) Prizm
Chevrolet (Geo) Prizm
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2002 Chevrolet Prizm
1997 Geo Prizm



Browse by Board
Browse by Topic
Today's Chats