Sign In Join 



Chevrolet (Geo) Prizm

1320 messages,  Last post on Dec 01, 2009 at 6:37 PM

You are in the Chevrolet (Geo) Prizm Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Prizm, Geo Prizm, Sedan


Messages Page 112 of 132
1
...
109
110
111
112
113
114
115
...
132
Prev
Next
Last
Go To Msg #
Search This Discussion

#1110 of 1320
catalytic converter? by veen
Mar 28, 2007 (7:20 am)
Reply
i have a 2001 chevy prizm that recently had an emissions solenoid (sp?) replaced. i don't know the exact part i just know it was something to do with emissions. anyway, today i was driving to work & some woman started honking her horn & making gestures for me to roll down my window. she said if my car was running bad to check the catalytic converter. my car is running fine & the engine light is not on or anything. is the catalytic converter something that commonly goes out in prizms or was the woman just a nutcase? thanks.
#1111 of 1320
91 Prism, rough warm idle by rick0
Apr 01, 2007 (2:40 pm)
Reply
I just bought a 91 Prism LSI with 68k on it.
It starts up and idles great, then after a few minutes of running the idle gets rough and sometimes it even stalls.
What could it be? I have changed plugs, oil, coolant, fuel filter. No change. Oh yeah, the Check Engine Light flashes at idle and whenever the rpm's stay constant.
Thanks
#1112 of 1320
scrape by lovemyprizmlot
Apr 03, 2007 (4:26 pm)
Reply
am i the only one with a prizm that scrapes over speed bumps? is there any way to fix this?
((1990 prizm))
#1113 of 1320
Re: How do I change the time on the radio? [mazda6iguy] by jad789
Apr 06, 2007 (3:15 pm)
Reply

Replying to: mazda6iguy (Mar 14, 2007 10:51 am)

Try holding down the arrows for up and down. The up arrow should be for the hour and the down for the minute. You have to hold them down for a few seconds.
#1114 of 1320
my car radio by gordongirl69
Apr 09, 2007 (2:57 pm)
Reply
the other day my raido stoping working and now it says err.- dose anybody know how to fix this.
#1115 of 1320
Re: How do I change the time on the radio? [jad789] by mazda6iguy
Apr 24, 2007 (7:56 am)
Reply

Replying to: jad789 (Apr 06, 2007 3:15 pm)

Thanks. Shortly after I sent the original post out, I found out how to do it. Thanks again.
#1116 of 1320
2001 Prizm Boken Drivers Door Handle by prizmguy01
Apr 26, 2007 (6:32 pm)
Reply
I need some help changing the door handle inside on the driver's side. Has anyone removed the inside door panel? I want to switch the rear passenger door handle with the front. The handle is the same. The handle broke in half...very cheaply made. I've already changed the driver's seat because the weld on the back of the seat broke. Also the mileage has decreased drastically. After the catalytic converter was changed, mileage went from upper 30's to upper 20's to low 30's. It's crazy!! Any help would greatly be appreciated!! Thanks
#1118 of 1320
1999 Prizm broken handle too! by caligrrl
Apr 27, 2007 (1:05 am)
Reply
I also have a broken handle-inside driver's door. Not sure how to remove door panel either. Like prizmguy I also thought of switching the back one to the front. Because I'm no longer thrilled with rolling the window down to get out of car. Please help! Thank You in advance.
#1119 of 1320
Gauge Pod for a '97 by mvftw
May 01, 2007 (9:11 am)
Reply
I would like to add a tach. I don't want to remove the dash and put in a LSI dash. Too much wiring. I was thinking about the 'A-pillar' gauge pods. Do they sell them for our cars? If so, who has them?

Messages Page 112 of 132
1
...
109
110
111
112
113
114
115
...
132
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement