You are here: Forums Sedans Chrysler Concorde Chrysler Concorde

Chrysler Concorde

1243 messages,  Last post on Nov 26, 2009 at 1:03 PM

You are in the Chrysler Concorde Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler Concorde, Sedan

Messages Page 4 of 125 1 2 3 4 5 6 7 ... 125 Prev Next Last

Go To Msg # Search This Discussion

#31 of 1243 emale-fastdriver by fastdriver Aug 04, 1999 (1:39 am)
emale- I just checked the 300 area of NHTSA and it's not there. I'll check the other areas. Thanks. fastdriver
#32 of 1243 Smell & Lysol by 401k Aug 04, 1999 (1:36 pm)
Just wanted to mention that I picked up that particular technique for getting rid of the A/C system smell from the television show, "Motor Week" on PBS. It is a safe and effective technique. It isn't something that I just came up with on my own! Tom
#33 of 1243 . by kurtd Aug 05, 1999 (11:44 pm)
I am having trouble changing the oil in my Concorde Lxi. There is not enough room to remove the oil filter. What is the secret?
#34 of 1243 kurtd by mugwump2 Aug 05, 1999 (11:54 pm)
Get one of those end cap thingies and use a ratchet.
#35 of 1243 . by kurtd Aug 06, 1999 (12:00 am)
mugwump2 Have you tried the end cap thingie. I have one and still can not get the leverage to turn it. It slips off the end.
#36 of 1243 . by kurtd Aug 06, 1999 (12:00 am)
mugwump2 Have you tried the end cap thingie. I have one and still can not get the leverage to turn it. It slips off the end.
#37 of 1243 Emale on TSB's... by hoho Aug 06, 1999 (1:41 am)
Emale, where do we get a complete breakdown of the TSB's? I have found TSB's as a listing with applicable numbers and main data topics but would like to find a place that will give us the whole data without charge.
#38 of 1243 hoho by emale Aug 06, 1999 (2:16 am)
don't know...if you ever find out...let me know.
#39 of 1243 kurtd by mugwump2 Aug 06, 1999 (2:54 am)
Yes, BUT, I had the dealer do the first change. DC seems to put the filters on with an impact wrench at the factory. Done two myself without drama. Some form of end grabbing wrench IS needed.
#40 of 1243 Emale by hoho Aug 06, 1999 (8:41 pm)
Will do for all to see

Messages Page 4 of 125 1 2 3 4 5 6 7 ... 125 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler Concorde Chrysler Concorde