You are here:
Forums
Sedans
Chrysler Concorde
Chrysler Concorde

1243 messages, Last post on Nov 26, 2009 at 1:03 PM
You are in the Chrysler Concorde Forum. Your Hosts are pat & karens
|
|
|---|---|
Good eve. I am having a problem finding out how to remove and replace the brake light (in the tail light section) on my 91 Chrysler Concord. Can anyone help me. Thanks in advance. Single lady all thumbs
|
|
|
Replying to: rchristiansen (Jul 07, 2008 7:11 am) |
|
|
Replying to: sparkyrhett (Jul 17, 2008 10:22 am) |
|
|
|
| The check engine light has illuminated at 90,000 mi on my 2001 Concorde LX, 2.7 V-6. To date the only mechanical failure has been an idler pulley bearing. The car runs fine with the light still on. It has not started to blink yet. One thing, I did smell gas fumes briefly when I turned on the heat (it's cold here in Wichita today). Any ideas? | |
|
I have a 2000 model 3.2LXI. After returning from holiday The car wold not start. I found that the positive battery terminal clamp had corroded. after cleaning up the clamp the car started fine but now the speedometer/odometer/trip computer and cruse contror are not working.Everything lights up but I get no speed indications and the odometer is not counting up any miles. I suspect that the road speed sensor has failed but have no idea where it is on this car. anyone have an answer or any other suggestions. thanks Darren |
|
|
|
|
OK I'm rebuilding a 2.7 liter V6 in a 1998 Chrysler Concorde LX for my boss. Here's the only issue I'm concerned about for the moment. is re installation of the Crankshaft Damper or pulley it was removed using a 3 jaw puller. but to reinstall a special tool C-4685-C1 is required it says cant justify spending 50 bucks on a tool i'm only going to use once. is there any way to install the crankshaft pulley without this tool?? I'm sure i will have more question that i haven't found but for the moment i really just would like to know if there is another way to install the pulley.
|
|
|
Replying to: skedeebs (May 04, 2008 8:49 am) |
|
|
Replying to: catkins1 (Aug 08, 2005 7:08 pm) |
|
|
Replying to: jms1024 (Mar 03, 2008 8:54 am) |
|
You are here:
Forums
Sedans
Chrysler Concorde
Chrysler Concorde
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2004 Chrysler Concorde



Browse by Board
Browse by Topic
Today's Chats