You are here: Forums Sedans Chrysler Concorde Chrysler Concorde

Chrysler Concorde

1243 messages,  Last post on Nov 26, 2009 at 1:03 PM

You are in the Chrysler Concorde Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler Concorde, Sedan

Messages Page 121 of 126 1 ... 118 119 120 121 122 123 124 ... 126 Prev Next Last

Go To Msg # Search This Discussion

#1192 of 1243 2000 chrylser concord replace radiator by khillman Jan 11, 2008 (8:21 am)
I WILL LIKE TO KNOW HOW TO PUT IN A RADIATOR IN A 2000 CHRYLSER CONCORD CAN I DO IT MYSELF OR DO I NEED TO TAKE IT TO A SHOP, AND WHERE IS THE THERMOSTAT LOCATED AT I HAVE A 3.2 ENGINE, ALSO DOSE IT REGUIRE SPECIAL TOOLS TO CHANGE OUT THE RADIATOR PLEASE LET ME KNOW I WILL REALLY LIKE SOME OPININS ON THIS MATTER THANK YOU ............ Replies to this message: hanna5858 (Jan 22, 2008 4:26 pm)
#1193 of 1243 Concorde door problems by walt5 Jan 15, 2008 (11:01 am)
My '99 Concorde passenger's and driver's windows raise and lower but seem to be off track..do not fit properly into window frame when raised...also, automatic children's rear dook lock started making very loud screetching noise when activated...can anyone help with these problems before I spend a bazillion bucks at my dealer?   steelerfan
#1194 of 1243 Won't start in the cold by stevenh1 Jan 16, 2008 (8:02 am)
My 1998 Concord will not start in the cold weather. I replaced the crank and cam sensors about 6 months ago when my car first wouldn't start. It ran fine up until a month ago, now when its cold outside thats all it will do is turn over but not start.
#1195 of 1243 Re: 2000 chrylser concord replace radiator [khillman] by hanna5858 Jan 22, 2008 (4:26 pm)
Replying to: khillman (Jan 11, 2008 8:21 am) The best way to do the replacement is to subscribe to Alldata the cost is $24.95/year for the make and model your looking for and it will give you a detailed discription of the how to and pictures to back it up. I've done it on my 1999 Concorde.
#1196 of 1243 feed back on repairs. by brotherskeeper Feb 03, 2008 (11:31 am)
i just had a waterpump and a timing belt put on my 1996 chrysler concorde lxi and i was told that it will take approx 4 plus hours and i was told that just the labor alone would cost me 325.00 is this an fair and accurate price.
#1197 of 1243 wow by khillman Feb 03, 2008 (2:41 pm)
thats alot of money you dont have anyone else that knows how to fix cars , i had my timing belt put on a 2000 chrylser concorde and while tey change the timming belt it's always good to change the water pump and thermostat, check around first don't always go with the first deal
#1198 of 1243 oil light flickers when idleing at times - 2000 Concorde by jms1024 Mar 03, 2008 (8:54 am)
Recently (about last month or so) I've noticed that sometimes when I come to a stop and the car is idleing (idling?) that the oil light starts to flicker. Today, when this happened I held the brake down and reved the engine and the light went out.   What is causing this? I change the oil regularly about every 6 weeks (I drive a lot).   Thanks! Replies to this message: trevor91 (Oct 10, 2008 5:51 pm)
#1199 of 1243 2001 chrysler concord lxi 3.2 engine by mayra1 Mar 09, 2008 (1:52 pm)
hello out there, can anyone tell me what is cousing my 2001 3.2 concord to take so long in starting? it starts fine if i start it up after a few minutes but if i wait 15 min or more i have to crank the engine 2 or 3 times to start after that i get a little black smoke smell of unburned gas but then the car runs fine! i had the crank position sensor , the cam sensor per my machanic also the manifold gasket to the tune of $550.00 bucks but it still does the same thing. this only happens at initial start/cold or after sitting 15 or more min. please,please,please someone help,i love this car!
#1200 of 1243 trunk struts 01 concord by sparkyrhett Mar 10, 2008 (6:56 am)
Good Morning: I am trying to figure out how to remove and replace the trunk struts on my 01 Concord. I have removed the little plastic 4 prong clip and I had assumed the clip held the strut to the "ball" and the strut would just pop off. Guess I was wrong, it will not come off. What am I doing wrong?. Any help will be appreciated. Thank you in advance Replies to this message: jayrider (Mar 21, 2008 1:55 pm)
#1201 of 1243 Re: Nothing Wrong with owning a newer lx...... [foxyj75] by mayra1 Mar 12, 2008 (12:19 pm)
Replying to: foxyj75 (Jul 03, 2007 7:28 am) im going to take you up on your offer, i own2001 concord lxi 92k on the odometer ive posted on 3/10/08 the problems im having , so feel free to check that out if you wish. when the car is sitting overnight and i go to turn it on,i have to crank it 2 or 3 times then at this point,it starts, but engine tuns slowly and black smoke (rich fuel) come out the tail pipe. after that the car runs kind of ok but has a little shake to it . i took it to the mechanic he said he had to replace a mnifold gasket because it had a vacume leak and that would solve my problem,well then he said the crank position sensor and the cam sensor would fix it to the tune of $550.00bucks. picked up the car,and now it runs alittle worse. on the highway between 60-65 mph it feels like a misfire and when i come to a stop,it shakes even more, i forgot to mention i have a 3.2 engine.HELP! HELP! PLEASE! THANKS!

Messages Page 121 of 126 1 ... 118 119 120 121 122 123 124 ... 126 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler Concorde Chrysler Concorde