You are here: Forums Sedans Chrysler Concorde Chrysler Concorde

Chrysler Concorde

1243 messages,  Last post on Nov 26, 2009 at 1:03 PM

You are in the Chrysler Concorde Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler Concorde, Sedan

Messages Page 119 of 125 1 ... 116 117 118 119 120 121 122 ... 125 Prev Next Last

Go To Msg # Search This Discussion

#1177 of 1243 2002 concorde with 100k miles by cweston Aug 08, 2007 (2:23 pm)
We have a 1999 concorde we bought used and it only had 80K miles on it, now has 114K....so, in my opinion, I think a 100k for a 2002 is quite a bit. I'd like to give some of our personal experience and what to watch for.....the engine of course as your last reply touched base on and I agree the 3.5 is better. But beware of the sensors---speed control sensor--when it goes, you would think its the transmission going out--about 200 to replace....the output control sensor is another one---this one, you won't be able to move the car--tow it in--transmission will not shift--250 to fix plus labor. Air bag light--if it comes on/stays on-you won't have power windows, blower for heat/ac or turn signals---check the clockspring in the steering column---another 250-300 to have fixed. Chrysler had alot of problems with these cars BE SURE to check to see what's been replaced and the engine sludge build up--have it looked over before you buy it! if I had my 'rathers',,,i wouldn't have bought it. I'm not a guy or a mechanic---I'm a mom of two and have learned about the chrysler concorde! but each to their own and good luck!
#1178 of 1243 Re: 2001 Chrysler Concorde Lxi Starting Problems [daveali98] by champlin Sep 22, 2007 (4:47 pm)
Replying to: daveali98 (Jun 30, 2007 10:49 pm) I had the same problem once...It was the Ignition Fuse located in the power distribution center (fuse box inside the trunk on the left side of the engine)...try it, may help
#1179 of 1243 Re: wood grain steering wheel [concordechaser] by champlin Sep 22, 2007 (4:49 pm)
Replying to: concordechaser (Apr 27, 2007 6:54 pm) there are some nice leather covers that fits just perfect...I have one of these.
#1180 of 1243 Re: 1994 [cj1] by konsoul12 Nov 13, 2007 (6:46 pm)
Replying to: cj1 (Jul 23, 1999 9:36 pm) im acutally having probs too...i just changed my front brake pads (would have done all but 1 of the 2 screws that hold the caliper to the rotor are so rusted bad that it wont come off). but anyways, i changed the pads and now my parking brake wont cut off unless it wants to. my brake fluid isnt all the way up to max but there is still visibly enough i s'pose. should i possibly fill it to the max line? or is it an electrical thing?
#1181 of 1243 steering by konsoul12 Nov 13, 2007 (6:59 pm)
for a while now my steering wheel has felt loose, for instance, while driving straight my steering wheel is turned to the left or to the right (depending on how im trying to stay straight).   for instance lets say im driving straight. i have to move the wheel left and right just to keep it straight. almost as if was loose. then when i go to make a turn i have to turn the wheel more than im supposed to.   alighnment?? other probs?
#1182 of 1243 ok well... by konsoul12 Nov 14, 2007 (6:38 pm)
ive posted actually a couple of posts...and still no reply...and i really need help on this issue....   yesterday i finally figured out how to change my brake pads on a 97 concorde lx..and since then the parking brake like near my speedometer turns off and then on for a while and then just randomly turns off....could i have done something to the brakes? they work fine to me...bled them and everything....    one thing it could possibly be is that the resevoir for the brake fluid isnt all the way filled up...but when i take the cap off it still has some in it. would i need to fill it up to the max line possibly?    also does the same thing with my brights near the speedometer...ever since i changed the bulb the light stays on all the time (which i did that maybe 3-4 months ago)   one other thing....   for a while now my steering wheel has felt loose, for instance, while driving straight my steering wheel is turned to the left or to the right (depending on how im trying to stay straight).    for instance lets say im driving straight. i have to move the wheel left and right just to keep it straight. almost as if was loose. then when i go to make a turn i have to turn the wheel more than im supposed to.    alighnment?? other probs?
#1183 of 1243 please help!! :[ by konsoul12 Nov 14, 2007 (6:41 pm)
yesterday i finally figured out how to change my brake pads on a 97 concorde lx..and since then the parking brake like near my speedometer turns off and then on for a while and then just randomly turns off....could i have done something to the brakes? they work fine to me...bled them and everything....     one thing it could possibly be is that the resevoir for the brake fluid isnt all the way filled up...but when i take the cap off it still has some in it. would i need to fill it up to the max line possibly?     also does the same thing with my brights near the speedometer...ever since i changed the bulb the light stays on all the time (which i did that maybe 3-4 months ago)    one other thing....    for a while now my steering wheel has felt loose, for instance, while driving straight my steering wheel is turned to the left or to the right (depending on how im trying to stay straight).     for instance lets say im driving straight. i have to move the wheel left and right just to keep it straight. almost as if was loose. then when i go to make a turn i have to turn the wheel more than im supposed to.     alighnment?? other probs? Replies to this message: wtd44 (Dec 17, 2007 11:39 am) foxyj75 (Dec 23, 2007 11:04 am)
#1184 of 1243 My rear defrost don't work on my 2002 Chrysler Concorde??? by stacy73 Nov 16, 2007 (5:43 am)
I changed the 50 watt fuse under the hood(I hope it was the right one)and still nothing.The light does come on when I push the button but thats it....Please help??
#1185 of 1243 engine trouble by neff11 Nov 21, 2007 (2:51 pm)
2000 concord lxi needs engine.priced from 3700 to 4000 for an engine. owe 6200.00 on car. nice shape. leather, moon roof 92000 miles.i was told to trade on a lease to get rid of the negative equity in 39 months than trade on a buy.any expertise of an idea?
#1186 of 1243 Re: [konsoul12] Do not put your safety at risk! by wtd44 Dec 17, 2007 (11:39 am)
Replying to: konsoul12 (Nov 14, 2007 6:41 pm) At the very least, get yourself a repair manual that covers your car. Haynes and Chilton are reasonably priced manuals you can find at car parts stores. My number one advice to you though, is get help from a local source such as a repair shop or dealership. Brake systems are critical to your safety.

Messages Page 119 of 125 1 ... 116 117 118 119 120 121 122 ... 125 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler Concorde Chrysler Concorde