- #2535 of 2575
-
Crack in front Bumper
by larrykeller
-
Mar 20, 2008 (1:00 am)
-
|
Anyone know how to self fix a crack in the front bumper??
I own a 2001 GT, silver, and noticed a crack about 5 inches long on front bumper near the fog light on driver side. Is there some sort of quick fix I could do myself, just so it doesnt get bigger or crack all the way through?
|
- #2536 of 2575
-
Re: Crack in front Bumper [larrykeller]
by sruiz2169
-
Mar 24, 2008 (3:09 pm)
-
|
|
Replying to: larrykeller (Mar 20, 2008 1:00 am)
it shouldn't get any bigger...unless you repeatedly hit the bumper in the same spot. I have a 99 grand am se and i hit someone about a year and a half ago. cracked my front bumper and demolished the left side of my reinforcement bar but the crack hasn't gotten any bigger since. if it gets bigger i would worry but until then i think you're fine...
|
- #2537 of 2575
-
1996 grand am wont start
by vcsc
-
Mar 26, 2008 (7:49 pm)
-
|
|
i just wanted to let everyone know i finally got my car started it is actually a factory recall with the igniton you can go to pontiac to googel and put in 1996grand am factory recalls to see if your car has a recall u just call pontiac give them yourvin num and they will tell u if u have a recall on the igniton mine did some problom i was haveing was all the lights would come on but no crank nothing and i did a littel reaserch and found there was a recll so good luck hope it helps a littel bit
|
- #2538 of 2575
-
Re: . [mstan1]
by moezo
-
Apr 03, 2008 (4:25 am)
-
|
|
Replying to: mstan1 (Jun 24, 1999 3:59 am)
I also have a red 99 and it has chips all over the hood and fenders not sure what causes it. I think its from air pockets under the paint. It looks like some one grabbed a hand full of stones and thru it at the car. It would seem that the windshield would have the same damage if it was from construction on the roads.
|
- #2539 of 2575
-
Re: . [moezo]
by sruiz2169
-
Apr 21, 2008 (9:08 am)
-
|
|
Replying to: moezo (Apr 03, 2008 4:25 am)
not actually...i mean...if it was from the highway the impact would either break the debris up or cause it to bounce just high enough to miss the windshield all together...so it could possibly be from road debris that just missed your windshield...
|
- #2540 of 2575
-
1999 Pontiac Grand Am Se
by firefighter583
-
May 03, 2008 (7:46 pm)
-
|
|
Power window motor/ regulator broke. Window down will not go back up. How do I fix ? Where do I get parts & instructions to repair?
|
- #2541 of 2575
-
Re: 1999 Pontiac Grand Am Se [firefighter583]
by mercury1956
-
May 05, 2008 (4:56 pm)
-
|
|
Replying to: firefighter583 (May 03, 2008 7:46 pm)
the regulators are on ebay 50 75 bucks. dealer is probley a couple hundard. i got the part went to local glass company. 50 bucks to install. when the window motor cools down it should go up. hope this helps joe
|
- #2542 of 2575
-
Re: 1999 Pontiac Grand Am Se [mercury1956]
by rmartin1182
-
Jun 20, 2008 (12:16 pm)
-
|
|
Replying to: mercury1956 (May 05, 2008 4:56 pm)
This is great!! My window on my 99Grand AM GT went down and will not go back up. How do I remove the inner door panel. There is a screw below the handle and one inside the rotating door latch and one insid ethe locking switch. I have tried lifting/prying it up like my old car with no luck I thought it might have just come off the track but i an reading, the motor burns out? Thanks for the help Rick
|
- #2543 of 2575
-
Re: Starter Problem Fix [ricland]
by jtchristiank
-
Jun 24, 2008 (3:58 pm)
-
|
|
Replying to: ricland (Jan 01, 2006 1:30 am)
This took about 10 minutes, including time to get over the fear of tearing up the faceplate of the AC/Heater. I've owned a 2003 Alero since August of 2007. This "malfunction" occured the first time March, 2008. Since then, it has happened 5 times. I love the car, but the security is a major flaw. I'll update if this fix does not work.
|
- #2544 of 2575
-
Re: 1999 Pontiac Grand Am Se [rmartin1182]
by mercury1956
-
Jun 25, 2008 (6:18 pm)
-
|
|
Replying to: rmartin1182 (Jun 20, 2008 12:16 pm)
there is a wege piece at the top side of the dooe panel. remove the 2 screws. that will let door panel slide up. they are torque head screws. hope this helps joe
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
