- #2528 of 2575
-
Re: 1996 2.4 cant figure out whats wrong [sruiz2169]
by burdawg
-
Mar 06, 2008 (7:59 am)
-
|
|
Replying to: sruiz2169 (Mar 05, 2008 1:33 pm)
Yes, that water had contaminated the oil which was no longer providing good bearing lubrication, so the damage to the bearings was probably done before the head gaskets were ever changed. Once the heads were put back on the worn engine block the compression increased which put more stress on the already old and probably damaged bearings which lead to the result you had.
The lesson here is that major repairs to a high mileage engine usually aren't worth much - the final outcome which was to replace the engine with a rebuilt was the best choice from the start, depending of course on other factors, such as overall condition of the car, age of the rest of the drivertrain, etc.
|
- #2529 of 2575
-
Starter Replacement - 1995 Grand Am
by rzimm23
-
Mar 06, 2008 (10:55 am)
-
|
Has anyone ever replaced a starter on a 1995 Grand Am with the 2.3 Litre Quad Four Engine? I am assuming the starter is bad but was also thinking it could be the solenoid - wherever it might be located in the engine compartment????
Thanks
Ryan
|
- #2530 of 2575
-
Re: Starter Fix WORKS!! [kristenn16]
by candyjar
-
Mar 15, 2008 (2:35 pm)
-
|
|
Replying to: kristenn16 (Jun 20, 2006 10:21 am)
hell yes it works! cut that stupid yellow wire! its keeping you from enjoying your ride! I spent hundreds of dollars and tons of man hours till I finally took ten minutes to get to that damn wire and cut it. My car is working great now. and remember, if your scared to cut it, you can always put it back together again. No harm no foul. but I highly suggest it
|
- #2531 of 2575
-
1996 grand am wont start
by vcsc
-
Mar 16, 2008 (10:42 pm)
-
|
|
what yellow wire is everyone talking about please help me where is it located
|
- #2532 of 2575
-
Re: 1996 grand am wont start [vcsc]
by candyjar
-
Mar 17, 2008 (2:19 pm)
-
|
|
Replying to: vcsc (Mar 16, 2008 10:42 pm)
if you pull the radio out, on the left you will see the back of the ignition cylinder, it has a sleeve of three different wires in it, one is white, one black, and one is yellow. the yellow is the data wire that is associated with your passlock system. ( my car is a 2003 but the same passlock problem apparently has been going on for years). now apparently to do this technique you have to have the car running first. soooo...... try to start the car, when it doesnt start check to see if your security light is either staying on or flashing(see owners manual "anti theft system") leave the key in the on position for 10 minutes. after ten minutes you should be able to start it. put car in neutral. take out radio, dont unplug it, you just need that space to work in, so just let it hang till your done. behind the ignition switch is your black sleeve that has the three wires, cut the yellow wire. tape the wires, or cap them, or I recommend installing a toggle switch. but that can wait till another time when your ready. once the yellow wire is cut, the security light should come on and stay on "forever". Now if your battery dies or you put in a new battery, you will have to reconnect the yellow wire to get the car started the first time but then just disconnect it again ( thats the reason for the toggle switch) but even without the toggle switch, its well worth the inconvenience. I do hope this works for you. as I said, even if it doesnt work, its free, it takes ten minutes,its reversable, and its working for alot of people. I love my grand am, but was about to burn it in the street till this fixed all my problems
|
- #2533 of 2575
-
1996 grand am wont start
by vcsc
-
Mar 17, 2008 (4:26 pm)
-
|
|
thank you for that but i cant even get the car to start my theft system light stays on i tried to ddo the ten minute trick but still nothin so can u help me wiyh that
|
- #2534 of 2575
-
c1996 grand se 2.4l wont start
by vcsc
-
Mar 17, 2008 (6:48 pm)
-
|
|
hi im trying to find some help my radio got stolen yesterday woke up to go to try and start my car and nothin no crank nothin just a click noticed that when i put the keys in ingnition it doesnt ding like usally and the lamp on roof doesnt come on
|
- #2535 of 2575
-
Crack in front Bumper
by larrykeller
-
Mar 20, 2008 (1:00 am)
-
|
Anyone know how to self fix a crack in the front bumper??
I own a 2001 GT, silver, and noticed a crack about 5 inches long on front bumper near the fog light on driver side. Is there some sort of quick fix I could do myself, just so it doesnt get bigger or crack all the way through?
|
- #2536 of 2575
-
Re: Crack in front Bumper [larrykeller]
by sruiz2169
-
Mar 24, 2008 (3:09 pm)
-
|
|
Replying to: larrykeller (Mar 20, 2008 1:00 am)
it shouldn't get any bigger...unless you repeatedly hit the bumper in the same spot. I have a 99 grand am se and i hit someone about a year and a half ago. cracked my front bumper and demolished the left side of my reinforcement bar but the crack hasn't gotten any bigger since. if it gets bigger i would worry but until then i think you're fine...
|
- #2537 of 2575
-
1996 grand am wont start
by vcsc
-
Mar 26, 2008 (7:49 pm)
-
|
|
i just wanted to let everyone know i finally got my car started it is actually a factory recall with the igniton you can go to pontiac to googel and put in 1996grand am factory recalls to see if your car has a recall u just call pontiac give them yourvin num and they will tell u if u have a recall on the igniton mine did some problom i was haveing was all the lights would come on but no crank nothing and i did a littel reaserch and found there was a recll so good luck hope it helps a littel bit
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
