Sign In Join 



Chevrolet Lumina

849 messages,  Last post on Oct 24, 2009 at 4:25 AM

You are in the Chevrolet Lumina Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Lumina, Sedan


Messages Page 82 of 85
1
...
79
80
81
82
83
84
85
Prev
Next
Last
Go To Msg #
Search This Discussion

#810 of 849
96 lumina has no elec power to starter by primnumbers
Mar 17, 2007 (3:45 pm)
Reply
my 96 lumina has no ele power to the starter sometimes, it will not start. It has a factory secutiry system and an after mrkt radio. please help
#811 of 849
Re: 96 lumina has no elec power to starter [primnumbers] by 91euro
Mar 21, 2007 (1:49 pm)
Reply

Replying to: primnumbers (Mar 17, 2007 3:45 pm)

I have a 1992 Lumina Euro, I may be getting ahold of the bumpers, side skirts, trunk lid, hood and liscenceplate/revers lights form a 1993 Z34, does anybody know if all of those parts are interchangeable between the two?
 
I know the reverse lights and bumpers are different, but the Z34 liscenceplate holder and reverse lights should bolt into place of my original revers lights and fit because it will have the z34 bumper right?
 
I dont see why the side skirts or front bumper or hood wouldnt bolt up, but it anybody has any ideas or suggestions that would be great!
 
thanks!
#812 of 849
help by codered
Apr 12, 2007 (4:37 pm)
Reply
i have a 90 Lumina.....it has a noise that kicks in round 40mph......its not there when wheel is pulled to the right...i was told driver side wheel hub...but still not fixed .....any info would be great...thanks
#813 of 849
95 Chevy Lumina V6 82000 mi by deborahf
May 10, 2007 (9:01 am)
Reply
Hey Everyone,
 
I recently purchased my Lumina. Had the oil changed. That's not the problem. After purchased (from Step-dad)I looked under the car and noticed that is had a bunch of oil underneith. It also drips a few drops after I drive it. Slow drip. When I had the oil changed I asked the mechanic if he would look at it. He says he "thinks" it may be the Valve cover gasket. How do I tell if it is that or if it is the head gasket? The car seems to be running fine and makes no unusal noises.
Another question: I looked in the "Reserve tank"...for the antifreeze. It is extremely low and looks nasty. Planning on getting a flush. Can you tell me exactly what is done when they do this.
I apprieciate every anwser. I am a woman and would like to go into this knowing like I know something about what is done. Thanks
#814 of 849
Re: 95 Chevy Lumina V6 82000 mi [deborahf] by jpf
May 10, 2007 (7:06 pm)
Reply

Replying to: deborahf (May 10, 2007 9:01 am)

Is the coolant green or red? I believe GM did not switch to Dexcool (red coolant) until 1996. Dexcool has been the subject of many complaints. I would get the flush and new coolant. If the leak problems persist (oil and coolant), I would get an oil analysis to make sure the coolant is not leaking into the oil. This would cause major engine damage. Also, GM vehicles with the 3.1 liter V6 engine tend to have a leaking intake manifold gasket. Most Lumina models used this engine. If this is the problem you need to get it fixed as soon as possible. Good luck.
#815 of 849
Re: 95 Chevy Lumina V6 82000 mi [jpf] by deborahf
May 11, 2007 (1:04 pm)
Reply

Replying to: jpf (May 10, 2007 7:06 pm)

jpf....Thanks for replying. I checked the color in the reserve tank and it looks like it is supposed to be green. I rubbed between fingers and it feels pretty oily. It probably shouldn't feel that way...that's my guess. We are probably talking big bucks getting a dealer to repair...
Deborah.
#816 of 849
95 Chevy Lumina V6 82000 mi by deborahf
May 12, 2007 (4:24 am)
Reply
Does anti-freeze feel oily to the touch? If I needed the intake manifold gasket replaced, should this be done before the radiator flush? Is there any other parts that would need to be replaced while repairing the above? Radiator hoses? Thermostat? Also...when checking the air-conditioner, what does that involve?
#817 of 849
1993 Lumina by annalynne
May 14, 2007 (7:01 pm)
Reply
I need to remove the back spring system from my neighbors car. Dose anyone hava clue on how to do it, where the bolts are? What does it involve? Is it hard? Please help. The rear end of the car almost touches the ground and makes for a rough ride.
#818 of 849
Re: 95 Chevy Lumina V6 82000 mi [deborahf] by jpf
May 26, 2007 (8:03 pm)
Reply

Replying to: deborahf (May 12, 2007 4:24 am)

The best way to determine if oil is in the anti-freeze is to have an analysis done. If the oil and coolant are mixing you need to find the problem and have it fixed right of way. I suggested a leaking intake gasket may be your problem because this problem is common with GM's V6's. Changing the coolant without fixing the problem is just a short-term fix until the coolant got contaminated again. I would also change the hoses and thermostat. Good luck.
#819 of 849
lumina intake manifold gasket by jasper60103
Jun 28, 2007 (12:26 pm)
Reply
Does anti-freeze feel oily to the touch? If I needed the intake manifold gasket replaced, should this be done before the radiator flush? Is there any other parts that would need to be replaced while repairing the above? Radiator hoses? Thermostat? Also...when checking the air-conditioner, what does that involve?
 
deborahf,
when I replaced my intake manifold gasket, I had them change my thermostat as well. Only adds a couple dollars to the job.

Messages Page 82 of 85
1
...
79
80
81
82
83
84
85
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement