Sign In Join 



Chevrolet Lumina

849 messages,  Last post on Oct 24, 2009 at 4:25 AM

You are in the Chevrolet Lumina Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Lumina, Sedan


Messages Page 81 of 86
1
...
78
79
80
81
82
83
84
...
86
Prev
Next
Last
Go To Msg #
Search This Discussion

#798 of 849
Re: Buy a 96 Chevy Lumina ? [loretts] by codered
Jan 16, 2007 (1:50 pm)
Reply

Replying to: loretts (Jan 16, 2007 11:10 am)

hi i have a 1990 2dr with 134k on it...the 3.1 is a good motor . i get 20 to 21 mpg in city..with a/c round 18 to 19..not a lot of trouble just small stuff..if need parts try newgmparts.com...good luck sounds like a good car
#799 of 849
Re: coolant leak [kerryace2000] by carnov
Jan 21, 2007 (3:01 pm)
Reply

Replying to: kerryace2000 (May 01, 2005 3:58 pm)

Hi, I have exactly the same problem with my lumina 3.1, 95 model.
How did you solve the problem. Was the heater element/air conditioner to blame and if so how do I fix it?
Thanks
#800 of 849
1992 Z34 lumina, value ? by fast68
Jan 23, 2007 (12:25 pm)
Reply
i am looking at a 1992 lumina Z34, it is bright red and really clean body but dirty interior than needs cleaned, but good shape otherwise, it needs a head gasket replaced but runs, what would be a fair value on something like this ? especially in a regioin where cars this age are not very common as others are- especially better ones such as the Z34 ?
 
thanks for anything
R
#801 of 849
how to remove door panel by jguffey
Jan 27, 2007 (9:16 am)
Reply
My grandson has a 1992 Lumina in my garage. the right side mirror is broken. i have a replacement. I have no idea how to find the bolts to remove mirrow. i removed the small screw but it does not allow acces to bolts. i did not want to break the plastic door panel. help me please.
 
Jim
#802 of 849
Transmission by opiedog2002
Jan 27, 2007 (8:15 pm)
Reply
I have a 1993 Lumina and I was wondering if the transmission from a 1995 olds cutlass would fit because the transmission I have in my 93' is shot. Would the halfshafts be different in the 1993 than in the 95? I bought this transmission under the impression that the transmission would be completely compatable so if anyone can help I would appreciate it a lot.
#803 of 849
Output Specs by ipm79
Feb 04, 2007 (7:32 pm)
Reply
Hello, I was wondering if anyone can give me the transmission output specs for a 97 Chevy Lumina (Car) with the 3100 engine. I need the specs for 1st gear, 2nd gear.....etc. Any help would be MUCH appreciated.
Thanks.
#804 of 849
Re: Transmission [opiedog2002] by fast68
Feb 05, 2007 (6:02 pm)
Reply

Replying to: opiedog2002 (Jan 27, 2007 8:15 pm)

as long as they are the same model(4T60E most likely) (4 speed auto)and have the same electrical plugs then they should be interchangeable yes
you could do a transmission search on car-part.com
 
alot of the times the car year make and model is listed on the results for parts searches
 
good luck
#805 of 849
engine swap by tpayer
Feb 23, 2007 (11:15 pm)
Reply
hello i am looking for a ASG 5.0L V8 engine for my lumina Z34. and a kick ass body kit can someone help me out.
#806 of 849
Trouble shooting by oscarm
Feb 26, 2007 (6:33 am)
Reply
Hey everyone I own a 1996 chevy lumina with about 130k miles on it she's a 3.4 V6 she ran great until I notice oil spills and if I passed 60mph, it started to shake a little. Well today I tried to take her apart to change the spark plugs, I have a shop manual and I notice oil in the around the spark plugs and a lot of it I removed the head and two of the seals for the spark plugs where a little twisted out of shape one in the front and the other in the rear where the spark plugs went I was going to remove fuel rail because I notice oil and antifreeze moisture around the area but I'm stuck I don't know what to do the manual does not really tell me anything else ???
#807 of 849
Re: Trouble shooting [oscarm] by fast68
Feb 26, 2007 (2:55 pm)
Reply

Replying to: oscarm (Feb 26, 2007 6:33 am)

hi there, oil around the spark plugs is normal and commonly seen, and is fine as long as its in the threads or on the porcelain part of the plug only
 
sounds like an external leak, valve cover most likely
 
no need to remove the heads
 
if you end up finding out the engine is bad then lemme know as i have a good running 3.4L in a 92 Z34 i may sell/part out
 
make offer for engine or parts
 
good luck
randy

Messages Page 81 of 86
1
...
78
79
80
81
82
83
84
...
86
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement