You are here: Forums Sedans Ford Taurus/Mercury Sable Ford Taurus/Mercury Sable Wagons

Ford Taurus/Mercury Sable Wagons

474 messages,  Last post on Jan 19, 2009 at 12:24 PM

You are in the Ford Taurus/Mercury Sable Forum. Your Hosts are pat & karens

What is this discussion about? Ford Taurus, Mercury Sable, Wagon

Messages Page 43 of 48 1 ... 40 41 42 43 44 45 46 ... 48 Prev Next Last

Go To Msg # Search This Discussion

#415 of 474 Keyless Entry Not Working by ohmaxim Dec 28, 2005 (5:56 am)
Greetings, My Keyless entry for a 2001 Mercury Sable Wagon LS is not working. I have replaced the battery and the unit is not responding. Does anyone have any ideas?   Thanks. -Geoff
#416 of 474 Smell burnt rubber by ceecee Jan 11, 2006 (6:00 pm)
I have a 92 Wagon. Runs great,sometimes not.In the long run,does me fine.Past couple of days I have been smelling burnt rubber.Checked under the hood,nothing. Comes through the vents,but only when I'm mobile. When I try to duplicate it stationary,doesn't happen. I think it's coming from the left front tire. Yet,it's not flat,worn,etc.Any ideas?
#417 of 474 1997 Mercury Sable by udflyerfan Jan 16, 2006 (4:46 pm)
Replying to: functionfirst (Nov 16, 2004 2:01 pm) Trying to replace my license plate bulbs due to an inspection rejection.....apparently missing a bulb socket also....any instructions available for accessing the two bulbs??
#418 of 474 Re: Yeah, but that's a '92 [erbie] by gerald2003r Jan 17, 2006 (12:06 am)
Replying to: erbie (Mar 27, 2000 7:13 am) Well in my view it should NOT take a company like Ford to make a better version of a car in 5 years?!?!? But I do own a 1994 Ford Taurus Wagon and I'm happy but mainly because I'm able to do my own work on the car. At 140,000 miles the ball joints were shot, highway only for the most part and that would include the Stabilizer tie rods going much sooner. Moog has a great fix for this problem. Moog does allot of suspension problem solving. I'm at 252,000 and rebuilding the whole suspension including springs. It's a wondeful car on the highway if you know how to take care of it. Engine is running perfectly to date and the Tranny is showing signs of failure, but that is pretty good after 12 years! If you are looking to improve your Ford Taurus I will let you know how this next rebuild goes... Going greasable everything that I can find, Swaybar ties, Lower ball joints, Tie rods... Whatever I can find... Need tranny info if anyone has any on a 1994 Taurus Wagon LX...   Thanks and I hoped I helped and willing to hel many more..!   Gerald Replies to this message: e_net_rider (Mar 08, 2006 6:30 am)
#419 of 474 Brake Lights by dcornetta Jan 19, 2006 (12:36 pm)
I have a 2000 Ford Taurus Wagon (I know you feel bad for me). My brake lights are currently not working. I am in a pinch I really need to know how I fix those. Any suggestions. Unfortunately I can't find the owners manual on how to fix this problem. Please help!!!!!!!! Replies to this message: e_net_rider (Mar 01, 2006 6:17 am) badgerfan (Mar 06, 2006 10:49 am) e_net_rider (Mar 08, 2006 5:33 am)
#420 of 474 Re: Brake Lights [dcornetta] by e_net_rider Mar 01, 2006 (6:17 am)
Replying to: dcornetta (Jan 19, 2006 12:36 pm) Just a hint. Seems all American manufacturers have gone to cheap wiring. That is lighter guage and fewer strands. Result wires breaking at points of flex, particularly doors. Your wagon gate is such. Vulnerable are speakers, tag light, etc. But of great concern is the brake light circuit because of the third light location. This can short out the entire circuit. Complain to NHTSA and maybe enough complaints will force ford to recall and fix all. I've already repaired at least three broken wires in that area of flex, inside the rubber boots.
#421 of 474 Re: Brake Lights [dcornetta] by badgerfan Mar 06, 2006 (10:49 am)
Replying to: dcornetta (Jan 19, 2006 12:36 pm) Before you go jumping to conclusions, I would check to see if your Taurus was included in the brake light switch recall that I believe applied to all 2000 Tauri. My sedan was recalled, though I never had problems with the switch. You can call any Ford dealer and if you have the VIN they can tell you whether the switch was replaced when the recall occurred several years ago. I would not first assume that you have broken wires in your tailgate. Replies to this message: e_net_rider (Mar 08, 2006 5:33 am)
#422 of 474 Re: Brake Lights [badgerfan] by e_net_rider Mar 08, 2006 (5:33 am)
Replying to: badgerfan (Mar 06, 2006 10:49 am) My wifes vehicle is a 97 and from what I've heard all wagons from 96 on have same back end. Trouble shooting switch is pretty easy. Broken wires in the rubber boot of the lift gate is pretty common. The only wire that would force a recall will be the one for the third brake light. Speakers, tag light, etc will not force a recall as quickly as the brake light being out. If the insulation of the wire also breaks allowing a short, then possibly a fire hazard or at least a blown fuse in the lighting or other circuits. And so with the brake light as well. I know I had a blown fuse from such but don't remember which lighting circuit it was. So check fuses as well.
#423 of 474 Re: Yeah, but that's a '92 [gerald2003r] by e_net_rider Mar 08, 2006 (6:30 am)
Replying to: gerald2003r (Jan 17, 2006 12:06 am) Your vehicle would have the AXOD-E, which is the same basic tranny since inception of Taurus. Basic I say because there have been a number of small modifications over the years. The E version having a major change in the valve pack bolted up (under the side cover) where shifting is accomplished via the computer. Prior it was done by pressures developed inside the transmission. Changes over the years might include better seals, change out of some springs inside the pack, removing or adding check balls, drilling orifices to slightly larger size, and a change of the tubes located in the bottom pan. This last one Ford knows of because they sell the tube/s. I may have gotten the springs through Ford as well. I know I got some but don't remember which as I had a broken modulator spring as well (also common). The tube change may have been done because of inadequate lubrication to a point. Hazy memory after 10 years. There are like maybe 5 tubes visible when pan is removed. You will see a bracket holding them, but they are also loctite into the holes they go into. (one has just a reduced end to squirt oil into the area. This can be done without pulling tranny, but you will have to wait until all fluid has dripped down and solvent clean the ports for new loctite. One tube may be reused, just in a different location. A new tube is used for the redirection. In addition to the lubrication issue, it may affect the apply rate of one of the clutches. Your vehicle may already have this change but I don't remember when it came out. Transmission shops seem to have a new rule when it comes to this family of transmissions. If you have high milage, like maybe 100K and fluid has never been serviced, do nothing. Apparently the anti-oxidants in the fluid wear out way before this point. Consequently burning of clutch surfaces. New fluid tries to remove it, resulting in slippage. It is my understanding they've gone this way because of the ensuing trouble, they've ended up paying for rebuilds. I personally did AX4-S about 2 years ago with 100K. The S is and updated AXOD-E. In fact, the pans are the same and may have that stamped into them. I did it as soon as we got the vehicle, total flush. Later, I noticed it was wanting to do early TCC lock and late release. 2 years later I'm getting P1744 code, intermittantly, which indicates slippage. Shop announces new tranny. Think it was sloppy troubleshooting. Maybe the fluid wasn't up to snuff? Decided to try the flush again. While getting it and filter, I noticed that lubeguard has a flush product. The transmission rebuilders of america recommend the lubeguard in all rebuilds. Also developed many of the improvements, not Ford. I give the flush a try. I'm shocked at how dirty the fluid seems after 35K. Not sure of specifications on the Coastal brand from Autozone used last time. Used Walmart Mercon this time. (Make sure you use what your tranny call for) Disconnected lower cooler line and pumped old from converter as new was added. (16 1/2 quarts for me) No code reset yet. The lubeguard flush may have removed residues that weren't previously gotten. (cut engine the moment it seems to be near pumped empty from pan, each time) I will not add Lubeguard this time because it isn't a rebuild. Part of its function is friction modifier, less wear on metal parts too. Prevents harsh shifts also. But with wear and age on this tranny, it may induce to much slippage.
#424 of 474 3rd seat safety by bahlg Mar 08, 2006 (8:36 am)
I am looking at 2003 Taurus Wagon with the 3rd seat in the back. What is the safety of this for children? I have a call into my state police to find out the law, but does anyone else do this? I rarely have a need to put more than 3 children in my car, so the 2nd seat has always been enough room, but I love the idea of being able to put 2 more in there..I just haven't seen it done since I was child. Thoughts? Thanks!

Messages Page 43 of 48 1 ... 40 41 42 43 44 45 46 ... 48 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Ford Taurus/Mercury Sable Ford Taurus/Mercury Sable Wagons