* Server response code: 500 We've had a minor breakdown.






We've had a minor breakdown.
The page you were looking for didn't load. Try refreshing the page, or check out our Site Map.







Chevrolet/Geo Metro

1864 messages,  Last post on Aug 22, 2012 at 10:55 AM

You are in the Chevrolet Metro/Geo Metro Forum.

What is this discussion about? Geo Metro, Chevrolet Metro, Hatchback

#872 of 1864 Re: 1992 5sp 1.0L LSI speed sensor & speedometer [stan_top_down] by whitetop

May 20, 2006 (9:07 pm)

Replying to: stan_top_down (May 10, 2006 1:49 pm)
I don't know about new or after-market, but there have been a few of them on e-bay during the past few months. I've started buying some replacement parts before I need them. Parts for GEO metros are probably going to become difficult to find in the future. There are already a lot of convertible parts no longer available.
 
Are you still planning a trip to Washington, D.C? Let me know if you're coming past Joplin.
 
If you want to see a picture of Fluffy check out my place on CarSpace.
 
Whitetop

#873 of 1864 poor geo is sick maybe dead by brokengeo

May 20, 2006 (11:55 pm)

I have a 93 geo metro convertible it has 87,000 miles and started smoking thought it was pcv but wasn't bad head not that guy working on car says needs new engine or rebuilt [I trust him he is a friend] I cant find a engine looks like it will cost about800. to rebuild part by part cant find a total rebuild kit. Anyone have ideas or know how to find a kit? Thank you much
                              Lisa
                    

#874 of 1864 Rear wiper by dowens

May 21, 2006 (5:27 am)

Does anyone know if a rear wiper and washer can be retrofitted to a metro hatchback?.

#875 of 1864 New 95 geo owner looking to boost the HP by newgeoowner

May 21, 2006 (10:58 pm)

Ok heres the deal I bought a 95 geo metro for 400 with over $3000 worth of work done on it in the last 3 years and she gave me all the documents. Its a 4cyl 1.3 liter engine ,manual, also it is not a hatchback . I was wonder if you guy had any tips / suggestions to increase the Horse power enough to make it do more then 65 to 70 mph. Also what could I replace the engine with?

#876 of 1864 1997 Metro & 1997 Suzuki Swift ???? by p10leadman

May 21, 2006 (11:38 pm)

The 1997 Geo Metro & 1997 Suzuki Swift appear to be identical.... what I need is an EXHAUST manifold for the SWIFT- are they interchangeable?
I own BOTH...but can not tell without taking them off- which would be insane !
I can not seem to locate a suzuki swift manifold on google or ebay..any thoughts?
thanks
p10leadmanyahoo.com

#877 of 1864 metro rear shelf ? by p10leadman

May 21, 2006 (11:43 pm)

I've yet to see a shelf for the rear trunk cargo area...there are notches in the molding / trim, for one, but never have seen one? has anyone out there seen one or know where I can get 3 of them ???

#878 of 1864 fuel filter question on 95 metro by dil48071

Jun 03, 2006 (3:50 am)

where is the fuel filter located on my 1995 metro 3 cyl?

#879 of 1864 Idle speed? by vanillalatte

Jun 03, 2006 (5:44 am)

Pray tell fun loving Geo Owners, what should the idle speed be for a 3 cylinder manual?
I took off the automatic tranny and installed a manual one in my convertible (Vanilla Latte) because I mostly do highway (it has only 50 000 miles on it-80 000 kill-o-meters). At idle it revs at 1500. Is this normal? I thank you for an answer. By the way, the auto tranny, still filled with oil is in my lobby and for sale.

#880 of 1864 Re: fuel filter question on 95 metro [dil48071] by p10leadman

Jun 03, 2006 (4:25 pm)

Replying to: dil48071 (Jun 03, 2006 3:50 am)
Haynes Repair manual says that Geo metros with carbureted engines 1999 and later have filters INSIDE the fuel tank and require no service. BUT Geo Metros that are fuel injected, have a filter underneath the car, left, front, forward of the gas tank. It is small, about 3" diameter and 3-1/2 inches tall, 2 metal steel pipes coming out of it. I replaced mine, but the mounting bolt broke off- so I just remounted it with a new bolt verse old one. Keep in mind these fuel lines are PRESSURIZED....
Hope this helps-

#881 of 1864 Re: 1992 5sp 1.0L LSI speed sensor & speedometer [stan_top_down] by p10leadman

Jun 03, 2006 (4:30 pm)

Replying to: stan_top_down (May 10, 2006 1:49 pm)
Haynes does not list a speed sensor, but does instruct how to replace the cable- it is very intense- you basically have to remove the entire instrument cluster- not an easy job ! It is almost as bad trying to replace a burnt out dash light bulb ! Good Luck !!!
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement