You are here:
Forums
Hatchbacks
Chevrolet Metro/Geo Metro
Chevrolet/Geo Metro

1692 messages, Last post on Oct 24, 2009 at 5:27 PM
You are in the Chevrolet Metro/Geo Metro Forum. Your Host is pf_flyer
|
Replying to: vanillalatte (Dec 30, 2006 3:29 pm)
|
|
|
|
|
Replying to: ppatrick (Dec 30, 2006 4:09 pm) |
|
I haven't written in a while, but it's great to see so many of us are still out there happily tooling around in our Metros. Mine is a '93 five-speed convertible with 117K miles. I do my own tune-ups but leave the rest to my friendly mechanic. I wanted to leave a bit of advice for those of us who have A/C. Mine had a factory unit when I bought it used, and I had spent quite a lot of money on it to no avail. This last time my new mechanic suggested replacing the entire unit with an after-market system. The whole job cost me only $700 compared with $900 for a replacement factory compressor alone. The system works great - much better than before. I realize it is a power-grabber when it's in use, but here in the midwest there are many days when the humidity prevents open-top driving. I am a total believer in Metros and plan to drive mine for the rest of my life. I just had a new timing belt and water pump intstalled last week and she is running like a top. Hang in there, everyone! I enjoy reading about your cars.
|
|
|
|
|
Replying to: whitetop (Dec 30, 2006 6:32 pm) Did the aftermarket pose any problems in fitting? Special brackets...... weight difference.... I'm curious.
|
|
|
got a 93 & 94 1.0 metro problems r one was blowing oil in # 1 cyl. & stopd running i pulled head valves burnt out is this also the cause of the oil blowing & fowling plug & out the breather ? or ? cynlder walls look good so i dont think broken ring dont want to pull it if just the valves so.... Ideas ? & the other one i bought non running ran compression 2 cyl were low pulled head burnt valves again.... is this a common tin can on wheels problem ? |
|
|
|
|
Replying to: vanillalatte (Dec 31, 2006 4:53 am) I've got a '92 convertible 5-speed, and about 2 & a half years ago I put in an after-market AC (the car had never before had AC). I got it from an outfit in Phoenix. Since I was going to have my local mechanic install the system (rather than driving to Phoenix from Amarillo, TX), they asked if my mechanic had the special crimping tool required. Mechanic said yes - so I bought the system & had it installed. Installation was pretty involved, but, then, the mechanic had never done one before on a Metro. Once installed, it worked fine - then, about 6 months later, it quit - a leak. Happened again to a 2nd hose about 6 months after that. The second time I had the mechanic pull all the all the hoses & have them crimped - voila! No problems since. In retrospect I should either have had the mechanic talk directly to the Phoenix firm, or I should have driven to Phoenix to let them install the system. I am glad that I did it, though - now I can drive anywhere in the country at any time of the year at 38 mpg or better. |
|
| bought a '96 Geo Metro LSI with 76,000mi. So far, no problems - knock on wood. I was wondering if anyone could tell me how difficult it is to get parts for these cars when the time comes? I know they don't make this brand any longer and am a little worried about this. Please advise. Thank you. | |
|
|
|
Relax, take a deep breath...let it out slowly. Parts are easy to come by, Ebay is here and there are people on the net willing to help out, like..here for instance. Almost all the parts are interchangeable with the Suzuki Swift and/or Pontiac Firefly in Canada. Not really 100% sure but I think that the Firefly was made until your year... Nevertheless, don't worry. My advice, if you just bought your Geo, have the brake fluid flushed and refill with new, this fluid retains the humidity and you may lose braking power.... change your spark plugs, distributor cap and rotor along with the cables. And enjoy your ride. If something happens, parts are plentiful.
|
|
|
Replying to: vanillalatte (Jan 07, 2007 4:00 pm) Since I'm here maybe you or someone else out there can tell me if there is any way I can tell if the timing belt has been changed? I'm the third owner and do not have contact with the original owners. The lot which I purchased it from doesn't know. Can you advise? Thanks very much! |
|
|
|
|
Does it have cracks in it? For peace of mind have a mechanic look at it. Don't go to sleep with your head full of horror stories. Some of these are propagated by jealous friends or car haters. I would be more concerned by the state of the tires, the brake fluid and the alignment. Then you move to suspension and other tidbits, until you know the age of each component. A second hand car is something that grows on you. If you liked it the first hour, you will enjoy it up to the time that you dispose of it. Have fun with your (for you) new car.
|
|
You are here:
Forums
Hatchbacks
Chevrolet Metro/Geo Metro
Chevrolet/Geo Metro
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
1997 Geo Metro
2001 Chevrolet Metro



Browse by Board
Browse by Topic
Today's Chats