Sign In Join 



Mazda Protege Maintenance and Repair

3600 messages,  Last post on Nov 28, 2009 at 3:21 PM

You are in the Mazda Protege Forum. Your Hosts are pat & karens

What is this discussion about? Mazda Protege, Sedan


Messages Page 337 of 360
1
...
334
335
336
337
338
339
340
...
360
Prev
Next
Last
Go To Msg #
Search This Discussion

#3360 of 3600
Re: 1996 Mazda Protege - Desperately need help! [kaymt] by Mr_Shiftright HOST
Jul 25, 2008 (7:37 am)
Reply

Replying to: kaymt (Jul 25, 2008 3:54 am)

Well I think you made the right choice in not having a moonlighting mechanic work on it (since he would not guarantee his work) but it might have been fine to have the independent shop do the work if they are of good reputation and have a long familiarity with Mazdas. If it's just a local gas station type of shop, I don't know about that.
 
I think genuine Mazda parts would have a warranty no matter who installed them but you'd have to demonstrate defects is materials and workmanship, and of course the LABOR is not warrantied by Mazda if an outsider installs the part.
 
I know some very good indie shops so I'd be inclined to save the $300 and go there rather than the dealer, but if you don't have strong confidence in the indie shop or any idea of their reputation, then the dealer is really your only logical choice.
#3361 of 3600
Re: 2000 Protege ES idle and intake issues [paramount13] by downtube
Jul 25, 2008 (4:54 pm)
Reply

Replying to: paramount13 (Jul 21, 2008 9:22 pm)

If there's any air leak between the filter box and the intake manifold, that will cause an idle problem. The accordian-like tube is susceptible to cracking. Since the car's been in a front-end wreck, I'd inspect carefully for leaks.
#3362 of 3600
newbie needs help by kenjen
Jul 26, 2008 (2:42 pm)
Reply
I have a 94 protege 194k miles dx automatic. I have had this car for about 3 months and it has been great...until I parked it one night and when i got up the next day and cranked it it was sputtering and knocking it will not idle and when i try to drive it there is no power. If I put it in park and floor the accelerator it will only go to about 3500 rpm(still sputtering) and almost sounds like it is flooding.When I got the car I put new plug wires,plugs,dist cap and rotor button on it and accessory belts. I am disabled and only drive the car about 20 miles a week. I thought it may be fuel filter so I replaced it and removed the injectors and cleaned them still the same problem...help please,thanks.
#3363 of 3600
Re: newbie needs help [kenjen] by Mr_Shiftright HOST
Jul 30, 2008 (9:33 am)
Reply

Replying to: kenjen (Jul 26, 2008 2:42 pm)

You might drive to Autozone and see if they can get any trouble codes out of that OBD-I system, since you've done all the obvious stuff already. They'll read them for free.
#3364 of 3600
Re: newbie needs help [Mr_Shiftright] by kenjen
Jul 30, 2008 (9:54 am)
Reply

Replying to: Mr_Shiftright (Jul 30, 2008 9:33 am)

thought of that but they said they cant read it cause it is a 94..but it wont drive,no power. I did discover it has a very weak spark off the coil(yellow) instead of blue. swapped the coil out with another to see if that was it but same thing,yellow spark. I am stumped,I looked in a haynes manual but the electrical diagrams are sketchy at best. I am getting battery voltage at the coil(13.2 vdc) and the old coil ohmed out within spec.
#3365 of 3600
Re: newbie needs help [kenjen] by Mr_Shiftright HOST
Jul 30, 2008 (10:04 am)
Reply

Replying to: kenjen (Jul 30, 2008 9:54 am)

Well then there are "manual flash codes" you can read off the engine light but you have to know how to do it on the OBD-1. I should have remembered that Autozone doesn't read OBD-I.
 
You might have to cruise the specialty Honda internet sites to get this flash code information, or buy the proper workshop manual that tells you how, but you need some hard data to figure out what to do next. You can't just be throwing parts at it, that's expensive and frustrating. Your public library might have something.
#3366 of 3600
Re: newbie needs help [Mr_Shiftright] by kenjen
Jul 30, 2008 (11:38 am)
Reply

Replying to: Mr_Shiftright (Jul 30, 2008 10:04 am)

I saw something the other day on what your talking about I will just have to remember where it was. thank you very much for your input and if I get it figured out I will be sure to post the fix.. Kenneth
#3367 of 3600
2003 Mazda Protege with check engine light for 2yrs by bdkay
Jul 30, 2008 (1:37 pm)
Reply
To all you guys and gals out there with a Protege that runs rough with a code that says intermittent misfire, here is what it took to fix the problem.
 
Spark plugs, coils , wires, injector flush, new PCV valve and count 'em four fuel injectors. One was really bad and the dealership put in one new injector and 3 used ones. All of this was covered under the extended warranty we bought 5 years ago. All the work worth about CAD 2600. Not a cent did we pay to have this troublesome problem fixed. So far, no more check engine light and the car is purring. Hope this helps other people out there with the same problem.
#3368 of 3600
2003 Mazda Protege with check engine light for 2yrs by bdkay
Jul 30, 2008 (1:36 pm)
Reply
To all you guys and gals out there with a Protege that runs rough with a code that says intermittent misfire, here is what it took to fix the problem.
 
Spark plugs, coils , wires, injector flush, new PCV valve and count 'em four fuel injectors. One was really bad and the dealership put in one new injector and 3 used ones. All of this was covered under the extended warranty we bought 5 years ago. All the work worth about CAD 2600. Not a cent did we pay to have this troublesome problem fixed. So far, no more check engine light and the car is purring. Hope this helps other people out there with the same problem.
#3369 of 3600
Chat Night by pf_flyer HOST
Aug 05, 2008 (2:02 pm)
Reply
Tuesday means Mazda chat night! The chat opens at 8:45 pm ET and runs until 10 pm ET. I hope you're able to join us tonight to meet and greet with your fellow CarSpace members!
See you there!

Messages Page 337 of 360
1
...
334
335
336
337
338
339
340
...
360
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement