Last post on Sep 19, 2013 at 3:03 AM
You are in the Mazda Protege
What is this discussion about?
Mazda Protege, Sedan
#3207 of 3742 Gas Filling Problem!!!!
Nov 19, 2007 (9:23 am)
I've seen this posted befor but i couldn't find the answer so here it goes. I have a 2000 mazda protege ES. Just recently when I go to put gas in it I can only put a little at a time because it starts to overfill. What it does is allows me to put about a half a gallon and then it overfills. Then I wait about 20 sec and start the whole thing over again. It is very much a pain in the ass. It takes me about 10 min to put $10 in my tank and thats at $3.50 a gallon!! Any help would be great.
#3208 of 3742 Re: Gas Filling Problem!!!! [mmborder]
Nov 19, 2007 (12:59 pm)
recently when I go to put gas in it I can only put a little at a time because it starts to overfill
I'd bring it into the shop to get it checked; you don't want to damage the guage within the fuel tank as I've heard that could be an expensive repair.
#3209 of 3742 01 Protege: Noise from bottom when U-turn
Nov 19, 2007 (1:41 pm)
I got a 2001 Protege LX 2.0. Recently I hear some cranking noise from front left bottom when I do the U-turn (left U-turn). I went to mechanic and he said there is a problem with left axle. But after I changed the left front axle ($180 cost), there noise is still there. Does anyone got any idea about this problem? Thanks~~
#3210 of 3742 Re: Gas Filling Problem!!!! [mmborder]
Nov 20, 2007 (9:01 am)
In order to put fuel into the tank, there has to be a means for the air in the tank, displaced by the entering fuel to exit, otherwise, you'll have what is occuring to you, the pump will click off, or you'll have a backflow of gasoline.
I'm not an expert in this area, but this is what comes to mind:
You could have a crimped filler tube; that's the tube going from the filler neck down to the tank, or conceivably (and you'd have to call a shop that knows about Mazda's and the fuel system arrangement in your car - I'd suggest looking in the yellow pages for an independant shop) I believe there's a gas tank vent solenoid and vent line as part of the evap system which reclaims gas fumes and returns them to the tank. Either the vent line is kinked, or the vent solenoid isn't doing it's thing.
Nov 22, 2007 (12:18 am)
Ok about a month ago my 99 pro lx(125000mi) was vibrating at hiway speed and stopped. then last week i start the car put it in drive and the check engine light started flashing and i could tell it was misfiring. i stopped at a light and the CEL went steady. i checked the the code and it was P0302 ( misfire in cylinder 2) does anyone have like a clue as to what could cause the misfire. mind you i just had a tune up ( brand new wires and brand new double platinum spark plugs). any help would be greatly appreciated
#3212 of 3742 Re: Gas Filling Problem!!!! [mmborder]
Nov 30, 2007 (9:41 pm)
I'm sorry I don't have an answer for you, but I do have the same problem. I let it go for few months and recently checked it out. I removed the tank and the filler neck, but did not see any restrictions. I suspected that the venting system me be not working correctly and really didn't want to pay to have fixed. I let it go a little longer, but realized that that the car would seem to run out of gas a lot sooner than normal. I know its bad to run a car that low, but I always liked to check and see exactly what point the car would run out, just in case. This new problem has been getting worse and worse, it now chugs like its low on gas at a quarter tank. The car always starts and drives well when it first starts up, but a few minutes go by and it chugs and hesitates. I immediately suspected the fuel filter, but realized these cars only have a sock filter on the end of the pick up tube. I also removed the charcoal canister to see if it was plugged and was causing a vapor lock, which would explain both problems, but that did not help. At this point I suspect once again that one of the emissions/vent solenoids are to blame, but am not sure which one, or how it all works. Please let me know if you have fixed your problem yet, and if anyone else could help, or supply some info on this vent system that would be greatly appreciated. Thanks.
#3213 of 3742 Check Engine Light Problem.
Dec 03, 2007 (5:50 am)
My wife has a 2002 Protege 4 speed automatic.
About 5 weeks ago, she noticed that the engine was running a little rough and the "Check Engine" light would come on. When it came on, it flashed for about 5 seconds and then stopped. We took it in for the 60,000 check and they did everything they were supposed to.
Well, we noticed within a few days, the car ran worse than before the 60,000 mile check up. It ran rough at stop lights, the check engine light came on a bit more, and a new twist - when driving on the freeway, the car seemed to hesitate a bit or, when it would lurch to a degree.
We took it in 2 weeks ago, appararently, during the tune up, the mechanic forgot to put some conductive agent on the coil which was causing a misfire, hence the check engine light. Well I got the car back and we are still having the problem of hesitation on the freeway, almost near stall outs at stop lights (Though that was a one time thing and generally runs smoothly at stop lights) and the "Check Engine" light is making new visits. Flashing at first, then turning off after about 5 seconds. But, definetly, more often.
Our trip to the dealership yesterday didn't yield any results. They had the car for about 7 hours. According to the computer, the engine is misfiring still, but they cannot locate the reason why. They did check the EGR valve and it is working fine. (Though this was a problem of the "Check Engine" light about 8 months ago.) We got one phone call wanting to know if we had changed gas stations lately. End Result: Drive the car for a week and bring it back next Saturday and see if anything new is on the computer.
Well, this morning on the way to work, the car started a few new things. One, between 30 and 40, the car surges. You can see the tachometer moving up along with the surges. Two, when downshifting, starting at 40 mph, the car surges there as well and you can see the RPM surge about 500 rpm for a second.
Does pretty much the same thing at just below 20 MPH.
Anyone have any additional thoughts as to what this could be?
Dec 03, 2007 (12:41 pm)
after checking the coils and wires and fuel infectors etc. so finally as i suspected my spark plug was the culprit. the tip broke off ( i really dont know how that happened). so the 2nd cylinder wasnt burning gas so it was damaging the cat converter. my car doesnt like spark plugs apparently one flew out another stripped the cyl head and this one just up and broke
#3215 of 3742 1993 mazda protege fuel filter
Dec 09, 2007 (5:44 pm)
Where is the fuel filter located on 1993 Mazda Protege? Thank you so much for your help with this.
#3216 of 3742 OT Light Flashing
Dec 12, 2007 (5:29 pm)
I have a problem with my OD Light Flashing. I noticed there are old posts with the same problem. Has there been any resolution to this issue?
My OD light started flashing over two months ago. I took it to Goodyear for a check. They suggested transmission flushing but before they did it somehow the radiator was damaged which cost me $500 for a new one.
They had said that the transmission fluid was low and very dark. But with the radiator repair, I told them not to flush the transmission but put in more transmission fluid. Anyway, when I pick up the car, the flashing light was off and stayed off for several weeks. Now it is back on. I took it to a different service repair person who said that one of the solenoid was sticking and I should have it flushed which I did. He also said that if that did not work I may have to take it to a transmission specialist like AAMCO. But the light still flashes occasionally. I have 114050 miles on the car, what should I do?