Sign In Join 



Mazda 626 Troubles

2476 messages,  Last post on Nov 12, 2009 at 12:00 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda 626, Sedan





Messages Page 243 of 249
1
...
240
241
242
243
244
245
246
...
249
Prev
Next
Last
Go To Msg #
Search This Discussion

#2415 of 2476
Re: 99 V6 Engine Noise [gyates] by Mr_Shiftright HOST
Aug 15, 2008 (8:46 am)
Reply

Replying to: gyates (Aug 14, 2008 6:09 pm)

I'd move on this noise right away. If the AC compressor seizes, you have contaminated your entire AC system and then you have a big mess and a BIG expense.
#2416 of 2476
Re: 99 V6 Engine Noise [Mr_Shiftright] by gyates
Aug 15, 2008 (3:05 pm)
Reply

Replying to: Mr_Shiftright (Aug 15, 2008 8:46 am)

Thanks for responses. After listening closer, the noise seems to be an upper engine noise. Decided to check oil level. Was down about 1/2 quart. Topped off oil, and no more noise at any time now, with or without a/c on, at idle or full throttle. Plus, a/c has never given any indication of an issue with it, still blows nice and cold as it should. I will tell my daughter to listen closely for any sounds from the engine. I probably should add that the car had been sitting for about 5 days without being started when I started it up and heard this "noise".
 
Also, I had posted an earlier thread about an idle surge issue. After running some Lucas in the last tank of gas and pulling the negative battery cable to reset computer, no more idle surge.
 
Car needs to "survive" one more year of college, and then it is not my problem Car has 124k on it now.
#2417 of 2476
93 626es powersteering by ghostface
Aug 18, 2008 (8:32 am)
Reply
my power steering been makin horrid noises lately cuz the fluids been leakin i guess now i was drivin and hit a bump then all of a sudden my power steering stopped workin while drivin i could turn but it felt like my car was off and it began to try to over heat. can any1 help me what should i do and will it be expensive
#2418 of 2476
Re: 93 626es powersteering [ghostface] by puttering
Aug 19, 2008 (2:18 pm)
Reply

Replying to: ghostface (Aug 18, 2008 8:32 am)

Well, if your power steering is leaking, and it's not a small leak that you can just keep filling up before it runs out. Then, I would suggest that you do not drive it at all. The leak came from a bump you stated, maybe a power steering hose got busted, or loose. It could also be the rack and pinion unit got damaged from a big bump too. If you have to keep useing the car, and you can't afford to fix it, then you might be able to remove the power steering belt(only if it's a seperate belt and doesn't power other important parts to) so that the pump won't be running dry, but I'm not sure if that's safe or not, so you might want to get advice from someone else about that.
#2419 of 2476
99 Mazda 626 4cyl 2.0 (shifting problem) by pdemello3
Aug 19, 2008 (3:11 pm)
Reply
Just started having problems . Put the car in Drive from a standing stop when I hit the gas, the engine revs but is very slow to take off,almost like its in neutral. It does take off, a bit sluggish . At higher speeds, it seems fine. Can anyone help.
#2420 of 2476
Re: rough idle [zoomnomore] by justplayin
Aug 22, 2008 (2:39 pm)
Reply

Replying to: zoomnomore (Aug 04, 2008 6:49 pm)

I have 2000 626 and this just started on my car. This what I have been told to check, first is to change out the spark plugs. then also change/flush tramsmission fluid and last to make sire that your belt is tightly secured and not loose. The last thing to check is the pully's. Hope this helps
#2421 of 2476
check engine light by cbus722
Aug 30, 2008 (6:28 pm)
Reply
I have a 1997 Mazda 626 LX 2.0. Can't get it to pass the emission test. Code PO421 comes up and don't know what it means? Had Code PO133 on the test , but it's not coming up anymore after changing both o2 sensors,spark plugs,new spark plugs wiring. Can you tell me what Code PO421 is?
#2422 of 2476
Re: Engine makes hood vibrate [gracefully] by askperry
Sep 11, 2008 (8:17 am)
Reply

Replying to: gracefully (Aug 02, 2008 10:45 am)

The hood rests on rubber pads that can be adjusted by turning them. If the pads are not making contact with the hood, it will vibrate. The stick (for lack of a better term) that holds up the hood gets loose with age. You can wrap duck tape around the area that rests on the frame.
 
Good luck.
#2423 of 2476
Charge & Rear lights come on when I turn the wheel by askperry
Sep 11, 2008 (8:18 am)
Reply
I have a 1990 Mazda 626 (still). Whenever I turn on the A/C or turn the steering wheel,
 
1. the "charge" light and "rear" light come on.
2. Power steering is lost.
 
After I cleaned the battery terminal, this problem only exist when I turn the steering wheel.
 
I get 12V when the engine is off and 13.3V when the engine is on. I've taken the battery and alternator out of the car and had them tested at AutoZone. They are both good.
 
Thanks in advance.
#2424 of 2476
Re: 99 626 Idle Surge [gyates] by askperry
Sep 11, 2008 (8:21 am)
Reply

Replying to: gyates (Jul 10, 2008 10:45 am)

direct a brief spray of carb cleaner around different locations where vacuum hoses attach, around the throttle body and around the manifold. If the is a leak, the engine will surge.
 
Good luck.

Messages Page 243 of 249
1
...
240
241
242
243
244
245
246
...
249
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement