Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Mazda 626 Mazda 626 Troubles
2476 messages, Last post on Nov 12, 2009 at 12:00 PM
You are in the Mazda 626 Forum. Your Hosts are pat & karens
|
|
|---|---|
|
My car make screeching noise when it is cold and when you start the car in the morning. The noise comes from the belt. I used belt spray for a while, which makes the noise go away for a day but keep coming back the next day. Is there a permanent and cheaper solution to resolving this noise from belt. Thanks Syed
|
|
|
|
|
Replying to: guidry3 (Feb 16, 2008 10:34 pm) Mazda at one time had a factory kit for these things, but it was pricey.
|
|
|
|
|
Replying to: saeedabidi (Feb 17, 2008 3:25 pm) |
|
|
Replying to: windowphobe6 (Feb 17, 2008 7:32 pm) chances that this will fix the problem after it is rebuilt?
|
|
|
|
|
Replying to: guidry3 (Feb 18, 2008 5:29 pm) |
|
|
|
| Ok I have a 94 626 and for some reason the battery continues to drain if the car set more than a couple of days at a time, I have replaced the battery and terminals, and had the alternator tested (it was good) and for some reason when I turn on the headlights it kills the car. Any help would be greatly appreciated!!! | |
Hello ev1. I just got a 1989 mazda 626 Lx. It has a hold system button on the drive shifter.So me being me I pressed that button .Now my car won't drive.It goes in all gears but don't move.Anybody got any ideas I would love to hear them. 
|
|
HELP ME I CAN'T MOVE 
|
|
|
Hello, Was wondering if anyone knew what this means.. I took my 2005 mazda 626 to get tested and this was the result. PO133 = 02 Sensor Circuit Slow Response(Bank 1, Sensor 1) and P1131 = Unknown Troble Code. I have no clue what it means please someone help me understand in plain and simple as possible thanks.
|
|
|
|
|
Replying to: lid03 (Mar 20, 2008 10:37 am) Code P0133 Possible defects: bad front 02 sensor front 02 heater malfunction loose front 02 sensor pressure regulator malfunction fuel pump malfunction fuel filter clogged fuel leakage leaky exhaust sytem purge solenoid valve malfunction (evaporative emissions system) insufficient engine compression engine defect--leaking coolant into engine.
|
|
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2002 Mazda 626
Browse by Board
Browse by Topic
Today's Chats
