Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Mazda 626 Mazda 626 Troubles
2476 messages, Last post on Nov 12, 2009 at 12:00 PM
You are in the Mazda 626 Forum. Your Hosts are pat & karens
|
Mazda just replaces a tans range switch Code PO78. Now they have puleed a new cod PO731 which did not show up before. Anyone know what this code is and how to repair? thanks
|
|
|
Replying to: eharing (Dec 12, 2007 3:27 pm) |
|
|
I have a 95 626 2.0L, 5 speed I'd like to know how to access the trouble codes stored in the computer. is there a cable and software that I could plug the car into a laptop with? ok now the question of the day... 193,000 miles, at idle the engine runs a bit rough, new NGK plugs installed and didn't help. think it may be ICS? has a vibration at 1500 rpm in neutral, oscillating somewhere.... harmonic balancer? This is the first small car I've ever owned, I love it so far, but I really am not used to dealing with computer controlled cars. sometimes I wonder if I've got the rubber band wound too tight.. LOL thanks for any help ya'll can give... John |
|
| my car wouldn't go more than 20mph so the mechanic told me to change the piston rings after he did a compression check the number 3 piston wasn't working so i replaced the piston rings, had the head redone, replaced the headgasket, did a full tune up, but when i went to turn it on the car doesn't start. I believe 100% that it's the timing but i'm a bit rusty at it can someone help me please? | |
|
Does anyone make a after market cooler for the tranny. I think the main problem with the trans of this era is they are too small for the weight of the car causing them to overheat.
|
|
|
|
|
My car make screeching noise when it is cold and when you start the car in the morning. The noise comes from the belt. I used belt spray for a while, which makes the noise go away for a day but keep coming back the next day. Is there a permanent and cheaper solution to resolving this noise from belt. Thanks Syed
|
|
|
|
|
Replying to: guidry3 (Feb 16, 2008 10:34 pm) Mazda at one time had a factory kit for these things, but it was pricey.
|
|
|
|
|
Replying to: saeedabidi (Feb 17, 2008 3:25 pm) |
|
|
Replying to: windowphobe6 (Feb 17, 2008 7:32 pm) chances that this will fix the problem after it is rebuilt?
|
|
|
|
|
Replying to: guidry3 (Feb 18, 2008 5:29 pm) |
|
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2002 Mazda 626
Browse by Board
Browse by Topic
Today's Chats
