Ask the Car People.SM


Dodge Dakota - FAQs

243 messages,  Last post on Apr 22, 2012 at 7:27 PM

You are in the Dodge Dakota-2010 and older Forum.

What is this discussion about? Dodge Dakota, Truck

Messages Page 25 of 25

#236 of 243 Re: 2001 dakota check eng light [sunburn] by bpeebles

Mar 18, 2007 (5:18 pm)

Replying to: sunburn (Mar 18, 2007 4:23 pm)
HINT: Do not start the engine when you are pulling the codes... you just want to go to the "on" position 3 times then stay there on the last time.
 
Then go to this website or here, or here to look up what the codes mean.

#237 of 243 Re: Rear End Ratios [andy_jordan] by 99dktaguy

Jul 24, 2007 (9:12 am)

Replying to: andy_jordan (Jun 27, 2000 1:23 pm)
and there's also a 3.21 ratio rear end. i have a 99 dakota 3.9 sport with it.

#238 of 243 performance problems by jdashnaw

Aug 25, 2007 (6:00 pm)

When I excellorate with my 2002 dakota it revs up and then goes, even though it is all the way in gear. any one know the problem I have an automatic

#239 of 243 Dakota Axle Size by shoto1

Dec 30, 2007 (8:57 pm)

I'm getting ready to order a 2008 TRX4 Dodge Dakota (crewcab) with towing package, 3.92 gears, and full time 4 wheel drive. While looking at the Dakota brochure, it looks like if you order the part-time 4 wheel drive system you get the 9.25 axle and if you order the full-time 4 wheel drive, you get the 8.25 axle.
  
Does anyone know why you would get a smaller axle size with the full time 4-wheel drive as compared to the part-time 4-wheel drive? The dealership doesn't know exactly why this appears to be the case.

#240 of 243 Re: Dakota Axle Size [shoto1] by dustyk

Dec 31, 2007 (4:13 pm)

Replying to: shoto1 (Dec 30, 2007 8:57 pm)
I'm not sure. In the past the differential gearset size was dependent on the GVW rating of the vehicle.
 
Regards,
Dusty

#242 of 243 Ram Wheels on Dakota by kpierce05

Dec 27, 2009 (7:40 pm)

I put 2007 chrome 20" Ram wheels on my 2005 Dakota club cab. I love the look. ust wondering if anyone else has tried this? And if so what size tire did you use. I got 285/50/20. They only rub barely in a deep turn but otherwise I love the look.

#243 of 243 Re: pcv valve on 2000 dodge dakota [smithmr] by mrzeee

Apr 22, 2012 (7:27 pm)

Replying to: smithmr (May 04, 2006 7:03 pm)
I cant seem to pull the PCV valve out. I turned it 1/4 turn and pulled it up at all angles. It wont budge. There is a flange thing that sits on top of the valve cover that the pcv valve goes into...I am hesitant to mess with that ... I thought the pcv valve should just pull up. Any ideas?

Messages Page 25 of 25

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement