Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Dodge Dakota Dodge Dakota - FAQs
241 messages, Last post on Dec 31, 2007 at 3:13 PM
You are in the Dodge Dakota Forum. Your Host is kcram
|
Theo, I now realize why you used the 7/8 open end wrench. You are not aware how the quick disconnects work. It takes a special tool to remove the fitting from the 3/8" tubing. It can be picked apart but you can damage the spring.Best way is the quick disconnect tool less than 10 bucks at most parts stores. I replaced my muffler right after I bought it with a 14" magnaflow sounds great and the rest of the exhaust system is stock other than a stainless steel tip. Have had no problems with my brakes. gook luck on the brake issue. |
|
|
What does everyone think a fair price on a new QC Dakota, 4.7, auto, 26E pkg, premium 40/20/40 seat would be? The incentives on the Dakota and Ram have me interested and I may be wandering down to the dealership the weekend. thanks!
|
|
|
Replying to: au1994 (Jun 29, 2006 7:34 am) |
|
|
Mike..you are right..I sure did not know about the QC lines. anyway..got the job done. Cooler worked just fine as did the inline filter. The Dak is a bit underpowered for pulling my trailer (4200-4400 lbs loaded)...mind you low end tourque is the real issue. Going through the Rockies was not as problematic as I had imagined. A couple of spots (Rogers Pass & the first part of the Coquihalla), that were in excess of 6% required first gear and 4000 rpm. I just shifted in first or second manually and kept revs up to a max of 4500. But for the most part the ride went smooth and engine heating was not really an issue with temps going just past 1/2 on only a couple of occaisions. Outside temps were at the worst near Kamploops where it was +40C on Sunday. So all in all I'm pretty pleased with the results so far. Have to admit that when under a tow load, that Magnflow gives off a fair bit of noise. As far as gas mileage...well we won't go there..!! (-% I was getting avg 350 Km per tank and that was using premium at $1.28 / L in some spots. Whoever says that they don't raise prices on long weekends is fulll of crap. They do and it happens all the time.!! rgds, theo |
|
this is my first time buying a truck and i need some advice. I went to a dealerships website and found a nice 2003 dodge dakota sport(extended,3.9L V6, 22K mileage, and a ton of features) for 13,900. The next day i went to the dealership and the asking price was 16,000 but they said the lowest they can go is the online price (13,900). With taxes it would be a total of 15000. I wasnt sure what to do so I said I'll think about it. Does anyone have any advice for me. I checked other websites and I couldnt find any thing better.
|
|
|
Replying to: dave112 (Jul 04, 2006 8:01 am) |
|
|
This may be a great time to remind everyone that they can get a $500 refund for buying a Dodge by joining their local Farm Bureau for $50. This is a guaranteed conversion of $50 ==>$500 - you cant do that good in the stock market on a good day! |
|
|
First thing to ask is what is your application for purchasing a truck.? Will it be used for towing, city driving, hwy driving, or a combination of all of the above. I drive an '05 4.7L magnum SLT QC. Reasonable room in the rear for two teenagers. Front seats are heated and drivers is adjustable. Decent truck and as can be read prior to this post seems to be OK on towing .. although I would not want to max out Chryslers rating (7000lbs). Avg hwy mileage seems to be 21-23mpg depending on tail/head wind..!! No major problems and I am at 94,800km (59250 Miles). City mileage is probably in the 14-16 mpg range. The bed is about 5.5-6'...never measured it. but big enough that I can haul some drywall and 4X8 sheets of whatever. Only problem I had was with my brakes...that being that Dodge has still not figured out how to mix front disc with rear drum brakes and the first chance I get I am going to convert to rear discs. Read my earler post on what the problem was and how nicely (sic), they dealt with it. Only other thing that gets me is the interior cloth sucks as it gets very dirty - very quickly..now one chould take that comment with a grain of salt as I am in the vehicle nearly 2-4 hours out of every 8-10 hr. day Advise you check out the LemonAid Guide (or online). Don't buy all the BS in auto mags as many are paid (hmm I wonder by who..??), to say what they write. All in all though I am pretty happy with the unit and when the Co. decides it is time for me to go with a new veicle, I will very very likely buy it. Tricks done to date: K&N CAI, MagnaFlow 3" SS Exhaust, Long Trans Cooler w/Inline Filter, Roll-n-Lock Tonneau Cover, Spray-in Bed Liner, Le-Bra, Toyo 16" "wear like iron" tires, 180 Deg Tstat, (see Mikes Posting in this thread)..thanks to MIKe on that one..!! (got it today). Waiting patiently for SuperChips to come out with the chip. rgds, Theo |
|
|
Well the title says it all. I did install the 180 yesterday and probably did a couple of things wrong: did not let engine heat up and then put rad cap on. Went for a small drive and temp went to near H.! OK so I learned on this one. What i do notice is that on the OEM stat and on the side flange there appears to be a small brass tube with a tiny steel ball on the one side. I gather this is the "bypass" that bPebbles was mentioning. Well on the 180 unit it of course does not have the bypass. i am wondering if a small hole drilled into the flange would work..?? I am going to try this and will report back as to what goes on. Also need to find the engine temp sensor and make sure it is in OK shape. That can be tested with an Ohm Meter set for 20K. Any resistance at all indicates it is functioning normally...so I am told.! Rgds, Theo |
|
|
Replying to: steak2k1 (Jul 23, 2006 9:09 am) Also - are you certain that the thermostat you installed is compatable with a "bypass" cooling system? (uses the thermostat to mix the cold [radiator out] and hot [engine out] flows to produce the proper temperature into the engine) |
|
You are here:
Forums
Pickups Dodge Dakota Dodge Dakota - FAQs
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Dodge Dakota
Browse by Board
Browse by Topic
Today's Chats
