Sign In Join 



Volkswagen Jetta Maintenance and Repair

6270 messages,  Last post on Dec 01, 2009 at 7:16 PM

You are in the Volkswagen Jetta Forum. Your Hosts are pat & karens

What is this discussion about? Volkswagen Jetta, Sedan


Messages Page 607 of 627
1
...
604
605
606
607
608
609
610
...
627
Prev
Next
Last
Go To Msg #
Search This Discussion

#6061 of 6270
I could use your expertise again by sphinx1983
Jun 08, 2009 (7:29 pm)
Reply
bpeebles or Mr. Shiftright I had put in the new coil and everything was fine after I change the o2 sensor and the coil pack. It has been running great for the last few days. I drove it out to chesapeake today and when I got back home that pain in the A-- light popped back on. here is the list of codes it gave me 17608 fuel too rich, 17544 fuel too lean???? 18010 batty term B+? 16684 random miss fire, 16685 cyl 1 miss fire, 16686 cyl 2 missfire. I checked as much as I could. I did not drain the old gas out though so I don't know if that matters but after I fixed all the other stuff I had no more problems until tonight. Can you help me out again?? And how can fuel be too rich and too lean at the same time. Thanks for your help again. The Elizabeth River is looking pretty good about now if you know what I am sying. Thanks again. I will be looking for your answer as you have not steered me wrong on anything in the past. Thanks man
#6062 of 6270
Re: I could use your expertise again [sphinx1983] by bpeebles
Jun 12, 2009 (5:21 pm)
Reply

Replying to: sphinx1983 (Jun 08, 2009 7:29 pm)

I have seen too-lean/too-rich codes at same time... it was the MAF sensor which was sending bad info to the computer.
 
HOWEVER: With all the goofy codes you are seeing, I would suspect that there may be a GROUND problem. Only a ground-problem could influence so many disparate systems.
 
If I were working on that car, I would start by spending about an hour removing, cleaning, soldering, filing, checking every ground connection to the body I could find. I would pay close attention to the battery-engine, battery-body, and computer grounds.
#6063 of 6270
squeak, grind by niteflite888
Jun 15, 2009 (7:03 pm)
Reply
Hi there.
 
I have an 03 jetta automatic with 59k miles. Probably at around 52k miles the car gradually began making squeaking noises. i doubted it was me since the car overall has been ok. however, the squeak got so loud it almost has become embarrassing. i can only hear it when i'm driving at low speeds - upto 20 mph or so. i thought it was the brakes but they said the original front and rear still have a good 50% left. however, when they jacked up the car and just rotated the wheels, the squeak was loud and clear. they seem to think it's the rotors. do you agree that this is all it is?
 
next, i have a grinding kind of noise every time i hit a speed bump or am driving down my drive way onto the street - there is a slight elevation from street onto driveway. it makes sort of a crunch noise. i can force this to happen when i bounce the car up and down on the hood. once i applied some wd-40 in the door hinge and that seemed to help a bit. does anyone know what i need to do to get rid of these noises?
 
work i've had to do on the car include:
- replace wheel bearing - barely covered under warranty period
- brake light switch <-- retarded problem - covered by recall - check engine light due to coolant temperature system and thermostat - $150 fix i don't want to have any more out of pocket repairs! maintenance is ok.
#6064 of 6270
Re: squeak, grind [niteflite888] by bpeebles
Jun 17, 2009 (5:42 pm)
Reply

Replying to: niteflite888 (Jun 15, 2009 7:03 pm)

It is possible that you have sticking pads which may APPEAR that the outer pads are fine while the inner pads are worn thin. The only way to find out is to pull everything apart and look.
 
Rotors by themselves CANNOT make any noise... they just spin around. Somthing must be touching/rubbing on a rotor for noise to be generated.
 
It sounds to me that your brakes need a PM (Preventive Maintenance).
 
It would not hurt to pull the wheels and remove the brake-pads. Clean everything up with wire brush. Check that the dust-shield is not rubbing on the rotors.File any burrs from the caliper-guides. apply brake-grease and reassemble.
 
Oftentimes, by doing this, you may resolve issues such as what you are describing.
 
I PM the brakes on my cars every couple of years to keep things working well. The salt used on the roads can really rust-up the brake-works long before pads are worn out.
#6065 of 6270
Re: squeak, grind [bpeebles] by niteflite888
Jun 17, 2009 (6:28 pm)
Reply

Replying to: bpeebles (Jun 17, 2009 5:42 pm)

hm. interesting. i'll give that a shot. i guess i've driven the car with the current sets of brakes through 7 years of snow.
thanks.
#6066 of 6270
Need Help!! 98 plug/wire problem by sarahsanchez79
Jun 18, 2009 (7:13 am)
Reply
Ok, please excuse me if I don't get the names on all the parts right....my hubby takes care of the cars and I'm trying to get info for him. About 2 months ago we replaced his cars plugs...the guy replacing the plugs ripped the wires so we replaced the wires. Prior to that they hooked it up to one of those machines that is supposed to tell you where the problem is and it was said it was in the #2 spot. Of course after everything was replaced no problems. A couple weeks ago the clutch went and they replaced the clutch. On the first test drive however the car overheated and when they hooked it up again it again said it was the #2 spot. We have replaced the plug and it was fine but last night it started again. He replaced the wire (I believe just the one wire) but it still wont run right and its still saying its the #2 one...does anyone have any advice. I don't know about cars but my husband is saying he thinks his engine is blown. Please help!!!!!
#6067 of 6270
2003 Jetta 1.8t need to replace transmission by mahntee
Jun 19, 2009 (3:13 pm)
Reply

Replying to: moe313 (May 26, 2009 7:26 am)

I have a 2003 Jetta 1.8t automatic and I need to replace the transmission. Where can I get a used, and can I do it myself? Also I need to replace the exhaust manifold gasket as well. Help.
 
I live in South Utah County.
#6068 of 6270
Re: Need Help!! 98 plug/wire problem [sarahsanchez79] by bpeebles
Jun 19, 2009 (5:27 pm)
Reply

Replying to: sarahsanchez79 (Jun 18, 2009 7:13 am)

If it is not the sparkplug nor the wire... then the ignitor coil is the only thing left in the circuit.
 
Oftentimes, crud built up on the surface of the coil can cause problems. It may be worthwile to REMOVE AND CLEAN the coil in hot soapy water. (I use an old dishpan, dishsoap and toothbrush for this.) Rinse well and allow to dry in the sun. Inspect for cracks (the most common failure-mode for an ignition coil) Some folks have had good luck sealing cracks with automotive silicone sealant.
 
Given the price of an ignition-coil, it may be worth the effort to try.
#6069 of 6270
20055 Jetta Transmission Question by ealbs21
Jun 20, 2009 (11:53 am)
Reply
My Automatic 2005 Jetta which i recently bought from a VW dealership, has a huge issue going from reverse to drive. The car jerks and bucks slightly every time i put the car into drive. Sometimes the RPMs go up and the car doesn't go anywhere and then suddenly jerks forward or it doesn't catch at all and just glides until i pull over and restart it. The dealership says the computer is Fine and the car is working normally and couldn't duplicate the problem but that its normal for jettas to do this.It doesnt happen all the time and doesn't depend on the temperature. Anyone else heard of issues like this or have any ideas because im having trouble believing all Jettas have this problem.
#6070 of 6270
Re: 2002 VW Jetta [oemac411] by cjlloyd
Jun 21, 2009 (7:41 am)
Reply

Replying to: oemac411 (May 29, 2009 12:01 pm)

A dealership told me it was the terminals on my battery, i am not to sure how that would be connected for the fact that the car doesnt use the battery when it is running it is the alternator. The tightened my terminals and things were fine for a few months and now its doing it again. I have had both the alternator and the battery tested and they came back fine, the only thing i can think of is a bad ground. I will keep doing research and let you know if i find anything and i would appreciate it if you could to the same. If anyone else on this form has advice please help us.

Messages Page 607 of 627
1
...
604
605
606
607
608
609
610
...
627
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement