Last post on Nov 22, 2013 at 9:45 PM
You are in the Ford Taurus/Mercury Sable
What is this discussion about?
Ford Taurus, Mercury Sable, Sedan, Wagon
#2990 of 3012 Opinions for a '99 Taurus
Feb 07, 2012 (2:47 am)
Hope you Taurus folks can help. I looked at a '99 Taurus last night. It was traded in at a dealership and wholesaled not long after, probably due to it's mileage which is 151K. It is very clean inside and the body is good, a few dings and scratches here and there but nothing major. I wished I had more time to go over it, it was dusk by the time I took it for a ride. I noticed that the airbag light was lit. Any ideas why this is or what could be making the airbag light come on? The asking price for the car is reasonable, but I can't afford a lot of surprises if I buy it. Could it just be a faulty sensor? The test drive went well, the car is straight as an arrow, and the 3.0 V-6 seemed very strong for the mileage on it. The engine oil was clean and the trans fluid was clean as well and didn't smell burned to me. However, when I got on the ground to look at the underside of the car, there is a leak of what I believe to be engine oil, and there was a small puddle of it on the ground and on a crossmember to the right of the starter. I told this man about it, that I could see oil all over the bottom(probably being blown back while driving) I'm wondering if the oil pan gasket is leaking. I would HOPE it's not the rear main bearing seal. Is the Taurus noted for leaking oil at the RMB seal? I noticed a slight pulsing when I came to a stop and wondered if the front brakes were worn and the rotors may be warped. Due to the style of the wheels, I couldn't get a good look at the rotors to see if they were worn. His mechanic was going to go over the car and get back to me with the results.
Like I said earlier, I can't afford to put a lot of money into anything I buy, and of course I know that buying a used car with this mileage is a crap shoot. Any information you can give me about this model Taurus SE from 1999 would be greatly appreciated. Another thing: The guy unlocked the car for me by using the key. I asked him if there was a remote keyfob and he said no, like the car didn't come with one. Could this be true? Thanks, folks!
#2991 of 3012 Follow up to above post
Feb 08, 2012 (7:25 am)
Just wanted to say that I passed on the purchase of this '99 Taurus. After careful thought, I just couldn't take the risk of making a bad situation any worse. We only had so much money to work with here. The guy selling the car wanted $1800 and wouldn't take a penny less even though there were issues I had addressed. Like I posted above, there was oil leaking somewhere and coating the underside of the engine compartment, the airbag light was on, and the high-beam switch(in the turn signal stalk)wouldn't stay on when you needed the high beams on like it's supposed to. If I was in better physical shape and had the money to fix these things myself, who knows, this may have been a good deal. But I would have needed to take the car to my mechanic and deal with the cost of the repairs, however much they would have been. I offered the guy $1500 and he said no, there were others who wanted it. I said fine, sell it to them. I know it's hard to be picky when trying to buy a used car, especially one thats 12 years old, but I need to protect myself as much as I can.
#2992 of 3012 Haynes Repair Manual - WRONG
Feb 14, 2012 (6:51 pm)
#2993 of 3012 Haynes Repair Manual - WRONG
Feb 14, 2012 (6:51 pm)
Haynes repair manual #36075 96-05 Taurus/Sable states 98 Taurus SE is a 4 wire design with BLK/WHT, TAN/LT BLU, LT BLU/RED and RED. What I find in my car (98 Tarus SE) is 3 wires in a 6 wire MAF sensor. My MAF is labeled positions E, A, B, C, D and F. Position "A" is RED, "B" is BLK/WHT and "C" is TAN. All others are empty.
Emailed Haynes and their response seems to be: basically said hire a pro. I thought I had enough smarts to follow along in a book but I seem to be at a cross roads. Would anyone have any ideas for me?
#2994 of 3012 Re: Follow up to above post [shopdog97]
Feb 15, 2012 (7:46 am)
I think that was a wise move. IMO, Oil leaks are are red flags, the fix(es) may not be worth the price of the car. The one sounds like a nickle and dimer for sure. The cost of the repairs are probably why he is selling it.
#2995 of 3012 1994 taurus wagon 3.8L- horn not working
Nov 13, 2012 (6:33 pm)
I checked the fuse and it is okay. What are items could be causing the problem?
#2996 of 3012 1999 Taurus 180,000 mi, lurching
Dec 01, 2012 (8:47 am)
Our mechanic sold us this car, said they had checked it out. Ball bearing and brakes the first two days and it has lurched since we got it. They have replaced the fuel filter, thinking this caused it, didn't help. We checked transmission fluid, it was empty, replaced, this didn't help. Mechanic replaced 2 different sensors he says have to do with the transmission and still doing it. You'll be driving along and it will lurch on you, not like it's going to quit, no sputtering, but like you are in neutral giving it gas. Any ideas?
#2997 of 3012 2002 Duratec misfiring running on 3-4 cylinder after UIM-LIM gasket replace
May 28, 2013 (9:48 am)
#2998 of 3012 2002 Duratec misfiring running on 3-4 cylinder after UIM-LIM gasket replace
May 28, 2013 (9:48 am)
2002 Duratec. Replaced UIM and LIM gaskets and some deteriorated hoses. In doing so had to remove fuel rail and injectors. Pulled spark plugs with only about 15K and regapped them to .054. Used dielectric grease on plug wires at plugs and coil. Snapped all wires back onto connections.
Cleaned throttle body with choke/carb cleaner. Replaced EGR valve gaskets.
Put everything back and checked plug wiring order.
Started car. Stumbled due to no fuel at first and stopped. Recranked and started with foot on the accelerator. Now it ran but sounded very rough. Had to keep throttle way down to keep it running. It got up to 2500 RPM but sounded like it wasn't firing on all cylinders. ran like this for about 20 to 30 seconds and when I took my foot off of the accelerator it quit running.
Has a new fuel filter (6 months ago) and the PCV valve was replaced about a year ago.
Seems like it isn't firing on 2 or more plugs. Know that I snapped all electrical connectors onto the fuel injectors till the clicked and bottomed.
I thought it might just be fuel wasn't getting to the injectors but after 30 seconds the fuel should be pumping to all injectors.
Plugs not firing?
Injectors not firing?
What would you check next?
#2999 of 3012 203 Ford Tarus A/C problem
Jun 09, 2013 (9:11 pm)
My A/C compressor is rattling bad and I am not getting cold. I am wondering if it can just be low on freon. also can the clutch on those be replaced or do you have to replace the whole unit? any help is welcomed. thank you