- #2927 of 2935
-
Re: 2003 Taurus mystery smell... mold? [weather475]
by freeride2142
-
Jul 20, 2009 (8:39 pm)
-
|
|
Replying to: weather475 (Apr 20, 2005 5:14 am)
I am a little late getting in, but my wifes car has the same smell. We had to change out the cabin air filter a couple of times. This seemed to get rid of the smell. There is something about that year of Taurus. The cabin air filter was put in a bad spot or something, but because of this it has to be changed out more often than usual. It took me a while to figure this out. They do not tell you this when you buy one.
|
- #2928 of 2935
-
Re: 1996 Taurus power seat switch [twobigdogz]
by dslok8d
-
Jul 26, 2009 (6:35 pm)
-
|
|
Replying to: twobigdogz (Nov 07, 2005 6:05 pm)
any answer on the power seat issue I have the same problem on my 99
|
- #2929 of 2935
-
speed sensor
by terryg47
-
Aug 30, 2009 (10:08 am)
-
|
|
I am having trouble locating the transmission speed sensor on my 99 taurus 6cyl. can anybody please help
|
- #2930 of 2935
-
Re: 1999 Mercury Sable Dome Light [richard39]
by 1978transam
-
Sep 11, 2009 (3:34 pm)
-
|
|
Replying to: richard39 (Apr 05, 2006 10:05 am)
I realize this is in response to an old post, but did you ever solve this problem? I've taken the same steps as described and observe the same results.
|
- #2931 of 2935
-
Unplugging a fuel injector on a 1998 Taurus
by indy4192
-
Oct 15, 2009 (2:55 pm)
-
|
|
I have a low compression in my no.1 cylinder along with a misfire. To repair the engine isn't worth the cost. Can I unplug that fuel injector so that the unfired fuel won't ruin the cat converter? If I do unplug it will the engine then send more fuel to the other injectors to make up for it sensing the no. 1 cylinder not getting anything?
|
- #2932 of 2935
-
Re: Sway bar end links installation sable 2001 [pdc99]
by jack259
-
Oct 15, 2009 (4:15 pm)
-
|
|
Replying to: pdc99 (Dec 26, 2007 5:58 pm)
I did exactly as you described & it worked. I can't thank you enough; I was borderline psychotic trying to get that link to fit (pushing, pulling, rocking the whole dam car trying to move that sway bar).
Thanks.
|
- #2933 of 2935
-
1999 ford taurus SE alternator replacment
by tkem12
-
Oct 25, 2009 (8:36 am)
-
|
I need to get some info on how to change it out. Looks like it could be
a hard one
|
- #2934 of 2935
-
Re: 2005 Ford Taurus SEL Key Code [tigerj]
by gary5639
-
Oct 28, 2009 (11:26 am)
-
|
|
Replying to: tigerj (Aug 17, 2006 1:59 pm)
I've done this and it's pretty simple. The computer module is part of the fuse panel. It's located above the drivers left foot. The fuse panel is actually 3 circuit boards with the fuses sticking out. On the side of the white plastic portion is a 5 digit number. That is the code. If the fuse panel/computer is replace you need to reprogram the key fobs and the door panel.
I hope this helps, if you have questions let me know.
Gary, from Houston
|
- #2935 of 2935
-
Problems with Heater and Rear Driver Door
by halen262
-
Nov 14, 2009 (7:49 am)
-
|
|
Replying to: acadiarush (Nov 23, 2005 3:47 pm)
I have a 2003 Ford Taurus. The Heater won't run at all and I do have power in the main frame of the unit in the car. The lights come on in the heater, but I don't get heat or AC.
Also, the rear driver door won't go down? Does anyone know if this is an electrical problem with a fuse, and which fuse to change? Are these issue related? Man it's getting cold here in Idaho, and I would rather fix this myself than drop $$$.
Thank you,
Halen 262
|