Sign In Join 



Jeep Cherokee

2529 messages,  Last post on Nov 25, 2009 at 7:57 PM

You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Cherokee, SUV


Messages Page 242 of 254
1
...
239
240
241
242
243
244
245
...
254
Prev
Next
Last
Go To Msg #
Search This Discussion

#2406 of 2529
Re: Grand Cherokee 06 water on passenger front floor [dmphil] by dancerman
Sep 09, 2008 (9:43 am)
Reply

Replying to: dmphil (Sep 07, 2008 8:11 am)

It's probably a disconnected or blocked drain hose as said by Tidester. If no water dripping on the ground after the A/C has been running awhile, then that's the problem. You may try posting this question in one of the GRAND Cherokee threads where more GC owners will see your post and chime in.
#2407 of 2529
Starting problems by 70ss454_man
Sep 18, 2008 (8:28 pm)
Reply
1990 Cherokee Classic, 125,000 miles, and when starting, it turns over excessively before finally starting, probably about 5-10 seconds. It doesn't require any mashing of the throttle or anything, it just turns over for a while and then kicks on just as it should, and idles perfectly fine.
 
It does this even right after shutting it off, which I think is weird.
 
The plugs, wires, and I'm pretty sure distributor are new, and it looks like the PVC system was replaced right before I bought it.
 
I have friends with Jeeps and none of them require the length to start. They just fire right up first crank.
 
It doesn't worry me TOO much, because it always starts, but it gets extremely annoying.
 
Any ideas??
#2408 of 2529
Re: Starting problems [70ss454_man] by loosenut
Sep 20, 2008 (10:28 pm)
Reply

Replying to: 70ss454_man (Sep 18, 2008 8:28 pm)

two things come to mind..fuel pump pressure,and a stuck/plugged start injetor.
---get thee down to the auto zone,and see if your omputer has been throwing out trouble codes..see what they say..mom's shi-vole-t (chebby) cranked till she wore out both the starter and the flywheel starter ring on her 89 baretta,from a clogged start injctor in the trottle body.from running CHEAP AZZED GASOLINE!!..i mean,while you'r pumping,can't you tell the diffrence in the smell of the cheap stuff,and when you put a tank of the good stuff??at $4/gal,is 20 cents per gallon make a difrence??but mine starts better -especially in winter-on marathon premium.asking a old car to run on crappy gas is just BEGGING for trouble..i even seem to get better mileage by using the goods,t balances out for me..it won't do it on one or two tanks,but after three,see if it runs better..also,dump in some octane boost/injector cleaner-YES,THE EXPENSIVE STUFF!!..that 2-for-1-for.99 cents stuff doesn't work as well as the b-12 for 3.50,or the stuff lucas puts out...cleaner will help,but it's not a -rebuilt-injector-in-a-can...if it's broke-fix it..
--also,with todays cars,especially with something thats giving you trouble.try turning on the key-for at least a -five-count..(turn key on-count to five-out loud if you need to)..this will give the fuel pump a chance to bring the pressure up ,...
--if this helps,your fuel pump is getting weak,and you should plan on replacing it --SOON--..before you get to do what dyslexic ford drivers do
D river
R eturns
O n
F oot
--i drive a ford,and that one still gives me a chuckle!!
hope this helps you track your troubles down
o N
#2409 of 2529
Re: steering gear [bigflan99] by 98grandc
Sep 21, 2008 (7:47 am)
Reply

Replying to: bigflan99 (Aug 22, 2008 1:45 pm)

Hello
Did you ever get an answer to if the steering gear is servicable?
I have a 98 Grand Cherokee that has a lot of movement in steering wheel when driving.
I am wanting to find out if this play can be adjusted out.
If it can, how is it done.
Thanks
#2410 of 2529
Re: My 1997 Cherokee won't restart [4eyedwoody] by 98grandc
Sep 21, 2008 (8:01 am)
Reply

Replying to: 4eyedwoody (Jun 07, 2005 7:24 pm)

I have a similar issue with my 98 Grand Cherokee 4 Liter engine.
When cold there is 3 possible ways to start.
1) Let starter motor turn for about 5 or 10 seconds.
2) Try initial start but only to turn over engine then turn key back and then turn over again, engine then starts up on this second turn of the key.
3) Turn key to run position, wait 2 seconds and then turn over, engine starts right up.
 
Does anyone have advise on what needs to be changed to correct this minor but frustrating issue?
#2411 of 2529
Re: Starting problems [loosenut] by 70ss454_man
Sep 21, 2008 (7:01 pm)
Reply

Replying to: loosenut (Sep 20, 2008 10:28 pm)

Thanks, but I run at least mid-grade fuel and NEVER arco fuel. usually shell or chevron. I put a thing of lucas injector cleaner in it already, didn't make a difference. Its just weird that it cranks so long, but starts fine when it does. and idles smoothly.
 
Also, leaving the key on before starting doesn't change a thing either.
#2412 of 2529
Grinding noise by everyday1
Sep 22, 2008 (5:23 am)
Reply
I just got an 04 Laredo with 43K miles on it and when I switch out of park to drive or reverse there is a grind type noise. I also have it when I'm going from brake to gas. Can someone tell me what is going on? thanks
#2413 of 2529
Re: Starting problems [70ss454_man] by loosenut
Sep 22, 2008 (7:18 am)
Reply

Replying to: 70ss454_man (Sep 21, 2008 7:01 pm)

sounds like pressure is good..assume you've changed filters..maybe electrical..i've seen on this blog where the engine crank sensor-the one that's mounted at the flywheel-could they have picked a more-pain in the butt-place for that?
did you have them check for trouble codes?..if that engine crankshaft position sensor is getting tired,it'd show up as a trouble code..the auto zone's here do it for free..jeep gets a couple hundred-just to run a test,then you hear where they do a "update" on your computer-that makes it run slower and worse?!??!!
good luck with it !
#2414 of 2529
Re: Grinding noise [everyday1] by loosenut
Sep 22, 2008 (7:28 am)
Reply

Replying to: everyday1 (Sep 22, 2008 5:23 am)

i'd check all the fluids-transferr case,differentials,ect..then,try putting the transferr case in low-like maybe it wasn't in gear all the way..
look at your u-joints..
if it makes noise between decell and accel,it's probably a u-joint,or the ring gear in the rearend..thats why it's so important to check fluid levels-especially in the rearend..i see a lot of jeeps for sale -where all it needs is a third member..could be whats going on with yours!?
#2415 of 2529
I need help... by krell04
Oct 02, 2008 (11:24 am)
Reply
I have a 1990 Jeep Cherokee 4L Straight 6. This just started today, when I get the engine started. It seems to run real high for no reason that I can think of.. I drove it to the store and when I left, it started.. Has anyone had this happen or knows what I can do to fix it.. Also, when I start the engine, it sometimes just whirrs (kinda like, if you turn the key when it is already running..) and stops..

Messages Page 242 of 254
1
...
239
240
241
242
243
244
245
...
254
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement