Sign In Join 



Jeep Grand Cherokee

2465 messages,  Last post on Nov 24, 2009 at 6:34 PM

You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Grand Cherokee, SUV


Messages Page 239 of 247
1
...
236
237
238
239
240
241
242
...
247
Prev
Next
Last
Go To Msg #
Search This Discussion

#2376 of 2465
Re: hayhow1 [wlbrown9] by hayhow1
Jul 11, 2006 (12:36 pm)
Reply

Replying to: wlbrown9 (Jul 10, 2006 6:07 am)

i found out that the a/c and the cruise are controled by a vacuum line. it broke i fixed now it's fine.
#2377 of 2465
PCM Swap?? by baron_350
Jul 12, 2006 (12:09 pm)
Reply
Hello everyone, can someone help? (I posted on another thread and never got an answer) Is it possible to replace a bad PCM on a 2001 Grand Cherokee Ltd. (4.7L QuadraDrive) with a used unit from salvage (the donor vehicle is set up exactly the same as mine with same options, drivetrain, everything). Dealership trying to sell me a rebuilt one for $700 and I almost fainted. Have found a used one from a rollover wreck truck for $150. Jeep is driving fine currently but CEL stays on and scans keep returning P0601 bad PCM code. Any help at all will be VERY appreciated!!! If it will work I will snatch that part up!
#2378 of 2465
Re: PCM Swap?? [baron_350] by cheapjeepparts
Jul 12, 2006 (12:35 pm)
Reply

Replying to: baron_350 (Jul 12, 2006 12:09 pm)

If the Chrysler P/N on the used unit is the same as the PCM on your vehicle they will be compatible. Though the $700 dealer price sounds a bit high. I am a Jeep parts dealer and the most expensive PCM I list for that year model (parts vary by VIN codes) is $488 internet retail for a new one. If you need to find the part number for yours, call a Jeep dealer and give them the vin#. This will allow them to look up the factory module number.
#2379 of 2465
Re: PCM Swap?? [cheapjeepparts] by baron_350
Jul 12, 2006 (7:14 pm)
Reply

Replying to: cheapjeepparts (Jul 12, 2006 12:35 pm)

Thank you for the advice! I will call another dealer that hasn't already been talking with me on it in the morning to get the part numbers by referencing the vin's. I appreciate it!
#2380 of 2465
@ A Possible $4.00/ Gal Would You Still Buy A Jeep? by blankster
Jul 14, 2006 (5:16 am)
Reply
I would love to buy a '07 Grand Cherokee Overland but at $3.00 to $4.00 per Gal. my fear is what will the vehicle be worth after 3 years. I wish they offered more of a Lexus RX type vehicle that got better mileage. At 14 MPG city for the Overland I'm a bit scared off. I tried a V6 Grand and it was a bit of a dog on acceleration. This is from a customer that has owned a 2001 Grand and now a 2004 Grand Limited. Anyone else feeling the same?
#2381 of 2465
Still Buy a Jeep? by transpower
Jul 26, 2006 (7:24 am)
Reply
The 2007 JGC CRD (for Laredo, Limited, and Overland) should be available in March of 2007 and should get 22 mpg city, by my estimate (and my hope).
#2382 of 2465
Re: @ A Possible $4.00/ Gal Would You Still Buy A Jeep? [blankster] by chefe
Jul 26, 2006 (3:43 pm)
Reply

Replying to: blankster (Jul 14, 2006 5:16 am)

I have a 2005 5.7 Hemi, the important thing I took into consideration was the MDS system Multi displacement. I had a 1995, with 5.2 litre, and still have a 2000 with a 4.7. I love the Hemi, only have 3000 miles on it but as it get broken in it seems to be getting better gas milage hwy, in cruise the important factor. I'm hopping for 19,20 overall, most of our driving and all the research I did before buying the 5.7 let me to beleive 25 to 26 Hwy,( note in cruise if possibel), 15/16, city, 20/21 overall.
My 2000, 4.7 litre get 19 overall, 22 hwy, 17/18 city againg we are not heavy footed
#2383 of 2465
P 0601 internal control module failure check engnlght by fengelbert
Jul 30, 2006 (3:23 am)
Reply
I have an '03 jeep grand cherokee 2wd drv. It only has 41k miles and it has been a great vehicle. Yesterday the check engine light came on and I retrieved the code(on,off x 3) and it falshed this code p0601. I have did some looking on the net and have yet to find but one other who had the same. Any ideals or suggestions would be great and appreciated. The vehicle still drives great but the light is still on. Please Help....
#2384 of 2465
Re: P 0601 internal control module failure check engnlght [fengelbert] by blkhemi
Jul 31, 2006 (6:24 pm)
Reply

Replying to: fengelbert (Jul 30, 2006 3:23 am)

Check wjjeeps.com. This site has everything there is to know about the JGC, including the MIL problems.
#2385 of 2465
Re: P 0601 internal control module failure check engnlght [fengelbert] by fengelbert
Aug 01, 2006 (1:34 pm)
Reply

Replying to: fengelbert (Jul 30, 2006 3:23 am)

Thanks to all that helped. I took my jeep to the dealer today and they put it on the computer and found out that the spark plugs needed changing. The engine light came on due to a misfire in the spark plugs. it runs great and no engine light. it was a bit pricy though. 135$. I suggest to anyone to find out how much diagnoses cost first. The dealership in the next town to mine charged 70$ and they would not charge me that if they fixed it. The dealer here in town only charged 80$. So it pays to shop around. Also the kind of spark plugs make a big difference. Champions or NGK's. Thanks again and perhaps this info will be useful to someone else.

Messages Page 239 of 247
1
...
236
237
238
239
240
241
242
...
247
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement