Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
3449 messages, Last post on Nov 07, 2009 at 8:55 AM
You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester
|
Replying to: bigmudpuppy (Dec 28, 2005 8:44 am) And did you change them? If so, was it a hard project? Any help would be great |
|
|
|
my security light is comming on, the truck runs like crap when it is on, hooked a snap on scan tool up to the truck for a no start problem and when ever you start the truck it looses connection, does anyone have any advice?? thank you for your time and advice 
|
|
Hi this is my first time here. I had a simple question. I have chance to buy a 1993 s10 Blazer 4x4. It only has 63000 miles on it. I was told it has fuel problems or bad fuel pump. Is there any major costly repairs involving full system in the 93s? Is there easy test to determine if its pump. Before i buy it. I figured for 700 bucks i cant loose either way. The main reason i was buying it was for parts for my 91 s10 that was in a wreck. But i may keep the 93. Thanks this is a real cool sight.Have A good night all.
|
|
|
I am thinking of replacing the front turn signal units. My body shop installed the ones without fog lamps for my 2000 Blazer 4WD trailblazer trim. My vehicle was originally equipped with the fog lamps. Do you have to remove the bumber, or can you replace them from under the vehicle?
|
|
|
|
|
Replying to: s10mojo (Mar 02, 2009 9:17 pm) |
|
|
|
|
Replying to: auto9999 (Mar 03, 2009 7:40 am)
|
|
|
Replying to: jlflemmons (Mar 04, 2009 7:20 am) Thank you for your message. I am thinking of taking out the entire turn signal assembly - about 1.5 feet wide, a few inches tall, a few inches deep - with the orange plastic front plate equipped with the turn signal only. Then I would install a replacement assembly with both the turn light and the fog lamp. image example: http://ketech-llc.amazonwebstore.com/shared/viewProductImage.html?http://ecx.ima- - - ges-amazon.com/images/I/41X6Z1Jxc-L.jpg The assembly seems to be being fixed to the bumper unit by screws but I do not see the screws from in the engine room or from under the bumper. The body shop knowingly installed the wrong assemblies - he said that he found a used set of parts without the fog lamp at a discount price. I benefited from the pricing, so I felt I would not ask the body shop to redo the job. I would appreciate if you could tell me how to remove the turn signal assembly.
|
|
|
|
|
Replying to: auto9999 (Mar 08, 2009 7:52 pm)
|
|
|
Replying to: jlflemmons (Mar 09, 2009 4:58 pm) Thank you for your message. Your information based on your real experience is the most valuable. I will try and replace the assemblies on my Blazer. |
|
|
ok here;s a new one, I replaced the flashers on my 95 s-10 Blazer, now the gear shift indicator light flashes when I put on the turn signals, (column shifter) I bought and installed another new flasher thinking the first new flasher was bad, but the same thing happens with the second new flasher. The gear shift indicator wasn't flashing before with the old flasher installed. Any ideas?
|
|
You are here:
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Blazer
2001 GMC Jimmy
Browse by Board
Browse by Topic
Today's Chats
