Sign In Join 



Chevy Blazer GMC Jimmy Maintenance and Repair

3449 messages,  Last post on Nov 07, 2009 at 8:55 AM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, GMC Jimmy, SUV


Messages Page 333 of 345
1
...
330
331
332
333
334
335
336
...
345
Prev
Next
Last
Go To Msg #
Search This Discussion

#3319 of 3449
Re: Blazer Starting Issue . . .AGAIN!!!?? [jpmccr] by jpmccr
Dec 15, 2008 (5:53 am)
Reply

Replying to: jpmccr (Dec 06, 2008 10:16 am)

Last starting issue was also due to a really bad, messed distributor cap and rotor. Replaced and she runs fine.
#3320 of 3449
My 2000 will never be the same by auto9999
Dec 17, 2008 (4:21 pm)
Reply
Hi all,
 
I just wanted to share my recent experience. My 18-year old son crashed my 2000 Blazer. I had to pay more than $3,000 to fix it but the pain was more than the one-time expenditure. My Blazer now has subtle vibration on the steering wheel at acceleration and coasting, and the vibration is accompanied by the loud road noise. I think that the collision caused a misalignment of axles.
 
I really miss the smooth, quiet, silky ride of my Blazer. Now my Blazer is driving like a rough, noisy truck. I bought it new in 2000 and it has 83,000 miles on it.
 
Just a thought for everyone: if you test drive a used car or SUV, pay attention to any roughness of ride on accelaration and coasting. If you feel any roughness or excessive road noise, it may be because of misalignment of axles from an accident.
#3321 of 3449
Re: My 2000 will never be the same [auto9999] by sealteam8
Dec 17, 2008 (7:46 pm)
Reply

Replying to: auto9999 (Dec 17, 2008 4:21 pm)

It will likley be the front wheel bearings.. does it have a humming noise to it at all when u turn the wheel one way or the other? if so let me know and i can help narrow down which bearing it is.
#3322 of 3449
Re: My 2000 will never be the same [sealteam8] by auto9999
Dec 18, 2008 (5:41 am)
Reply

Replying to: sealteam8 (Dec 17, 2008 7:46 pm)

Hi Sealteam8,
 
Thank you for your kind words. I will test it and let you know as soon as possible.
#3323 of 3449
1999 Jimmy steering problem by tenpinarm
Dec 18, 2008 (10:02 am)
Reply
I just replaced my 4WD transmission module. I haven't been using 4WD for 2 yrs, but now I can't turn fully easily. If I'm going slowly It acts like I'm applying the brake.Any idea's?
Doug
#3324 of 3449
Re: My 2000 will never be the same [sealteam8] by auto9999
Dec 19, 2008 (4:27 am)
Reply

Replying to: sealteam8 (Dec 17, 2008 7:46 pm)

Hi Sealteam8,
 
I tried and listened to the sound from the front end and feel the vibration on the steering wheel while the vehicle was making right and left turns and moving straight. It sounded like those problems were significantly reduced during the turn, both right and left, even though the weight was on the front wheels. I do not seem to hear humming noise during the turns. In the meantime, the noise and vibration seemed to exist whenever the vehicle was moving and they increased and decreased as the speed went up and down on the straight path and during the turns.
 
Do you have any ideas?
 
Do you think the noise and vibration could be from over-inflated tires? The body shop seems to have kindly cleaned and inflated the tires for me.
 
I will try and hear the noise and feel the vibration when the vehicle is driving on the very smooth road surface, where the tire noise is expected to be minimum. Thank you again for your help. I will post my message again.
#3325 of 3449
2000 GMC Jimmy 2 Door...Siphon Fuel Tank by JeffsLady2008
Dec 19, 2008 (5:30 pm)
Reply
Ok...my GMC is parked due to expired tags and engine problems. I have a full tank of gas and want to siphon the gas out to put in my van but there is apparently a screen on the tank..is there a way to get the gas out WITHOUT having to drop the tank?? there is skid plate over my fuel tank so it would be a big pain in the keester.....and my fiancee is sick and cant help me do it right now...so i would be emptying the tank.
#3326 of 3449
Trouble Code P0446 by jpmccr
Jan 07, 2009 (1:02 pm)
Reply
2001 Blazer with 122,567 miles. Coming home I got the 0446 code. What is it and where do I need to look and/or need to replace. Solenoid, canister??? Never replaced those so I am not sure where they are. Just replaced distributor cap and rotor two weeks ago. Had it inspected at our local MVC and they tested the gas cap and it passed. Replaced fuel pump and filter two months ago. It seems that when it rains, the SES light pops up. Once cleared it stays gone. Would appreciate all/any advice/help. Thanks. . . . . .
#3327 of 3449
Driving lights by a90myers
Jan 08, 2009 (4:41 pm)
Reply
I have a 2002 Chevy Trailblazer with 64000 on the vechicle. Yesterday the driving lights did not come on. Are there seperate bulbs for the driving lights? I have low and high beams for the regular headlights.

Messages Page 333 of 345
1
...
330
331
332
333
334
335
336
...
345
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement