You are here: Forums SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair

Chevy Blazer GMC Jimmy Maintenance and Repair

3449 messages,  Last post on Nov 07, 2009 at 8:55 AM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, GMC Jimmy, SUV

Messages Page 333 of 346 1 ... 330 331 332 333 334 335 336 ... 346 Prev Next Last

Go To Msg # Search This Discussion

#3314 of 3449 96 chevy blazer 4wd problem by bladams13 Dec 03, 2008 (11:52 am)
i have a 96 chevy blazer that i recently had a new engine put in with 110k on the motor. it was sitting for about 5 months beofre the new engine was put in and driven again. when i got it back i put it into nuetral and put it into 4 hi and when i put it back into drive i went forward and every quarter turn of the front tires spinning it would make a loud clunking noise like something was grinding in the drivetrain. im not sure if its the front differential axles or something ive heard about the acuator?? any information and help is appreciated.
#3315 of 3449 Re: sudden stopage [buzzh] by johnss10 Dec 03, 2008 (4:39 pm)
Replying to: buzzh (Dec 01, 2008 3:02 pm) Boy, I understand the frustration. All I can say is everytime I've had those symptoms (several), it's been the timing chain/gears.   I'm working on the same idea of the engine swap for my S10 pickup, not my Blazer. should be a lot of fun. Replies to this message: bladams13 (Dec 04, 2008 7:13 am)
#3316 of 3449 Re: sudden stopage [johnss10] by bladams13 Dec 04, 2008 (7:13 am)
Replying to: johnss10 (Dec 03, 2008 4:39 pm) ya might be that but it drives perfect in 2hi only makes the clunking noie in 4wd. just tried it yesterday and it did it again but only when i turn the wheel or accelerate
#3317 of 3449 Re: Blazer Starting Issue . . .AGAIN!!!?? [jpmccr] by jpmccr Dec 06, 2008 (10:16 am)
Replying to: jpmccr (Dec 01, 2008 2:18 pm) Problem solved: gummed up fuel filter. $12.62 later and it runs fine. Replies to this message: jpmccr (Dec 15, 2008 5:53 am)
#3318 of 3449 HELP! by cobrabas Dec 06, 2008 (6:30 pm)
I just did the lower intake on my 99 blazer. put it all back together and fired it up. I fired up and i shut it down quickly. Went an ate dinner and returned to move it onto ramps to change oil before i test drove it and no it wont start. It cranks and sputters but wont kick on. Plugs are wet, i dropped the dristributer right back into place and my marks matched. dont know what to do or where to start.
#3319 of 3449 Re: Blazer Starting Issue . . .AGAIN!!!?? [jpmccr] by jpmccr Dec 15, 2008 (5:53 am)
Replying to: jpmccr (Dec 06, 2008 10:16 am) Last starting issue was also due to a really bad, messed distributor cap and rotor. Replaced and she runs fine.
#3320 of 3449 My 2000 will never be the same by auto9999 Dec 17, 2008 (4:21 pm)
Hi all,   I just wanted to share my recent experience. My 18-year old son crashed my 2000 Blazer. I had to pay more than $3,000 to fix it but the pain was more than the one-time expenditure. My Blazer now has subtle vibration on the steering wheel at acceleration and coasting, and the vibration is accompanied by the loud road noise. I think that the collision caused a misalignment of axles.   I really miss the smooth, quiet, silky ride of my Blazer. Now my Blazer is driving like a rough, noisy truck. I bought it new in 2000 and it has 83,000 miles on it.   Just a thought for everyone: if you test drive a used car or SUV, pay attention to any roughness of ride on accelaration and coasting. If you feel any roughness or excessive road noise, it may be because of misalignment of axles from an accident. Replies to this message: sealteam8 (Dec 17, 2008 7:46 pm) auto9999 (Dec 18, 2008 5:41 am) auto9999 (Dec 19, 2008 4:27 am)
#3321 of 3449 Re: My 2000 will never be the same [auto9999] by sealteam8 Dec 17, 2008 (7:46 pm)
Replying to: auto9999 (Dec 17, 2008 4:21 pm) It will likley be the front wheel bearings.. does it have a humming noise to it at all when u turn the wheel one way or the other? if so let me know and i can help narrow down which bearing it is. Replies to this message: auto9999 (Dec 18, 2008 5:41 am) auto9999 (Dec 19, 2008 4:27 am)
#3322 of 3449 Re: My 2000 will never be the same [sealteam8] by auto9999 Dec 18, 2008 (5:41 am)
Replying to: sealteam8 (Dec 17, 2008 7:46 pm) Hi Sealteam8,   Thank you for your kind words. I will test it and let you know as soon as possible.
#3323 of 3449 1999 Jimmy steering problem by tenpinarm Dec 18, 2008 (10:02 am)
I just replaced my 4WD transmission module. I haven't been using 4WD for 2 yrs, but now I can't turn fully easily. If I'm going slowly It acts like I'm applying the brake.Any idea's? Doug

Messages Page 333 of 346 1 ... 330 331 332 333 334 335 336 ... 346 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair