Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
3449 messages, Last post on Nov 07, 2009 at 8:55 AM
You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester
I have a 99 blazer 4x4 that I put in 4 low and the light on the dash just kept blinking, althought the vehicle felt like it was in low I don't believe the front was working. I then put it in 4 high and the light wouldn'tstop flashing also. when I put it back in 2 high all was wll. I tried this a couple of times and had the same result. Whaddaya think? Thanks Lorenzo
|
|
|
Replying to: chevguy1 (Sep 21, 2008 5:24 am) |
|
|
|
|
Replying to: toleson (Dec 15, 2007 11:17 pm) |
|
|
Replying to: chevguy1 (Sep 21, 2008 5:24 am) If this is OK, get the Haynes or Chilton manual (I have both) to see how the shifter motor is attached. |
|
|
|
I may have a slightly bent front lower control arm that may be causing alignment problems. If so, could this be adjusted to some degree?
|
|
|
Replying to: scruffielad (Sep 23, 2008 8:50 am) |
|
|
|
I took my Blazer to a buddy for him to look at and they told me it was the over drive bearing. I have never heard of an over drive bearing They told me that my whole engine had to be replaced and that just didn't sound right to me. Because Overdrive has everything to do with the transmission now if there is such thing as over drive bearing it would be in the gear box or somewhere in the tranny right? and how would I fix it
|
|
|
|
|
Replying to: chevygirl77 (Sep 26, 2008 10:05 am) There is no such thing as an "overdrive bearing" in an engine.
|
|
|
|
|
Replying to: jlflemmons (Sep 26, 2008 11:11 am)
|
|
|
|
|
Hi all, I had to buy a new remote the other day. But as of yet, havent gotten it to work.I called several Chevy dealers an found out that the one I bought was the only one for my year blazer. So, that is not a problem. IS there a set way to get the camputer to learn the new one,besides using a hand comp plugged in.? I did find out that someone changed the remote before and the old one I had was never for the blazer( but they did get it to work) The same dumb azz had an aftermarket alarm put into. (but this doesnt work and hasnt since I got it. ( dealer probally unplugged it.) So, I hope yall can help me here, because I miss using he remote. 2000 blazer LS 4x4 
|
|
You are here:
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Blazer
2001 GMC Jimmy
Browse by Board
Browse by Topic
Today's Chats
