Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
3449 messages, Last post on Nov 07, 2009 at 8:55 AM
You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester
i replaced the brakes and bleed the brakes. the brake pedal is hard and seems fine, when i start the car the brake pedal goes soft
|
|
I have a '97 GMC Jimmy that needs a new rear end. I was told I need to find out the gear ratio to make sure I get the right parts. How do I find the information I need?
|
|
|
|
|
Replying to: bigd1948 (Nov 06, 2007 5:28 pm) If you just feel the pedal depress a little when you start up, that's okay, that's just the power brake booster kicking in. If the brakes work fine and feel fine after that, you're okay. |
|
|
|
|
Replying to: twistkick (Nov 08, 2007 1:43 pm) GT4 -- AXLE REAR, 3.73 RATIO GT5 -- AXLE REAR, 4.10 RATIO GU4 -- AXLE REAR, 3.08 RATIO GU5 -- AXLE REAR, 3.23 RATIO GU6 -- AXLE REAR, 3.42 RATIO G80 -- AXLE REAR, LIMITED SLIP (POSITRACTION) Most common in the small Blazer/Jimmy 2wd is the GU6/3.42. |
|
|
|
| Hello, I have a 1996 Chevy Blazer4X4 I have had for about 4 years now with no problems. It has about 157,000 miles on it. And I never use the 4x4 option. Recently the Service Engine Soon light came on. I took it in for a free diagnostic check at a local shop. He told me the service code he got was a P1886, and has a issue with the 2-3 shift solenoid on my automatic trans. I did know the transmission had started to react very slow on the start when this light came on. And it never engages in overdrive now. Whats really odd is when I start it in the morning, or even shut if off for a few minutes. The trans shifts great. Then it slowly starts to get in the mode of high RPM to get the truck moving from a traffic light. If I manually shift from 1-2 there is no change and the engine RPM's hi. But when I go from 2-3, it is hard on the trans in shifting. The shop said the trans looks very good. But suggests a shift solenoid to be replaced. And he said he can clean out the solenoid for under a $100 dollars to see if it helps. He claims it is next to the valve body under the pan. Is this something I can do? I'm pretty handy with taking apart the car in most repairs. I believe the trans I have is a 4L60 but I am not sure. Let me know if the shop said was OK, and if possible for me to do it myself, to save the extra bucks in these hard times. Thanks Much!! | |
| i got a 95 blazer 4.3, problem is can run great then when u try to start it , it wont fire. has fuel, and spark, no ttouble codes , had to dissconnect battery or wait, then it starts right up. had it checked by Gm, cant find a problem, replaced computer still the same, any ideas? : | |
|
I've got a '96 Blazer 4x4, 4.3L, V-6, LS. Bought it used in '98, had 35K miles on it, and it's been pretty good to me, but it's now got a little over 100K on it, and the problems have started. Here's my problem: Every time I start the engine, the #4 fuse (gauges) blows out, the daytime running lights go out, the dash lights go out, and it drains the battery right down in no time. Put a new alternator in today, new spark plugs, plug wires, distributor cap and rotor, oil filter and oil changed. Apparently, none of those things helped at all, and it looks like it's an electrical problem, but I have absolutely NO idea of where to look for a short or wire damage first. Electrical is not our strong suit, but pretty handy with most other things and a quick learner. Has anyone else had a similar problem or heard of anything like this? I would appreciate any help, because we're both stumped here and are running low on spare fuses. Please, please help! 
|
|
Thanks for all the help, guys, but we managed to find the problem on our own. Oddly enough (or maybe not), it was the ignition switch. I didn't think of that before because I didn't have any problems with the Blazer's starting, and it wasn't stalling, either. Nonetheless, all the weird and funky electrical/fuse-blowing problems were coming from a bad ignition switch. Just thought I'd post the solution in case anyone has/or will have a similar problem. 
|
|
|
|
|
'98 Chevy Blazer has error code P1870.I know this has to do with the transmission,but don't know where to start.This has something to do with the surging I'm sure. Any ideas? Thank you guys! 
|
|
|
Replying to: pfeifer (Jan 06, 2006 5:29 pm) |
|
You are here:
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Blazer
2001 GMC Jimmy
Browse by Board
Browse by Topic
