Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
3263 messages, Last post on Sep 04, 2008 at 3:14 PM
You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester
|
I just recently bought a 1994 Chevy Blazer and I'm having fuel pump problems. I was driving the other day and the car just died out without warning. I got it home and about 7 hours later the car started again but died out again. When I turn the ignition the car won't turn over. I'm guessing it's fuel pump problems or fuel injectors. Can anyone please tell me some signs of a bad fuel pump or injectors? Please help.
|
|
|
Replying to: domnick (Aug 07, 2005 5:16 pm) Steve, Host |
|
|
Replying to: canadiangirl (Aug 07, 2005 4:06 pm) Yep. It's not that difficult a job to remove the upper intake plenum and visually check out the lines from the central injection assembly to the 6 poppet valves at the cylinders. They've had their share of problems, and are replaced as an assembly. Usually when they go out they're replaced with the multiport injection system.
|
|
|
I recently replaced the alternator on my 97 blazer. However, after I installed the new alternator, I realized I didn't remember exactly how all the wires connected back to it and I didn't have the foresight to make a diagram beforehand. I connected the wires with the clip back to the correct spot, as there is only one place for them. I connected the red wire from the battery to the screw on the back of the alternator. But I'm not sure where the black wire goes. Does this go on the same screw as the red wire? Thanks. |
|
| The last two days when I pulled into the parking lot at work, my 2000 Blazer changed from 2wd to 4wd-lo. I thought that I had accidently pused the 4wd button but the same thing happened again. While driving on the highway later I noticed that the 4WD-lo button began flashing while I was driving so I pulled over. As soon as I stopped moving the truck went inti 4wd-lo. I switched it back to 2wd and was able to get home. Any idea whats going on? | |
Is there any way to get the ABS light out without a scan tool, have done a brake job and checked the fuses and wiring. 
|
|
|
Replying to: nfamous (Aug 07, 2005 2:50 pm)
|
|
|
Replying to: steve1103 (Aug 08, 2005 1:40 pm) |
|
| I was wondering if anyone could help me out with either a link to information or a step-by-step here on how to remove the stock front grill from my 1999 Chevy Blazer. Thanks. | |
|
I have a 2001 GMC Jimmy. The back glass is stuck shut and have tried everything to get it to open? Has anyone had problems with this? Any solutions?? Have not figured out how to take the back panel off completely to look inside to see if something came lose. But it is locked shut .. very tightly. Thanks |
|
You are here:
Forums
SUVs Chevrolet Blazer Chevy Blazer GMC Jimmy Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Blazer
2001 GMC Jimmy
Browse by Board
Browse by Topic
Today's Chats
