- #6420 of 6469
-
Re: Key/Fob Programming Sequence [scottm123]
by joey14
-
Sep 07, 2007 (6:48 am)
-
|
|
Replying to: scottm123 (Sep 06, 2007 1:36 pm)
Your recommedation is how I figured out my alarm was not working.
I left my window down, locked the doors and then reached in and unlocked my doors manually, No alarm sounded?
|
- #6421 of 6469
-
Re: Key/Fob Programming Sequence [joey14]
by scottm123
-
Sep 11, 2007 (8:20 am)
-
|
|
Replying to: joey14 (Sep 07, 2007 6:48 am)
I forgot to test this.
I'll try to remember for tonight.
|
- #6422 of 6469
-
Leather Seats;
by mweinstein2
-
Oct 10, 2007 (12:33 pm)
-
|
2005 MDX: 23000 miles only! Bought new. When I received car their was creases in the leather that the dealer blamed on the plastic that was on the seats and said would even out. After 8 months and no change they replaced. New covers not much better but I waited again as they told me leather would even out.; Today I met with regional service manager that said it was normal wear. I said I hardly use the car, (23000 miles in 3 years) and that this was not exceptable in a $40+ vehicle. I asked who I could now speak with and he said he was it and the next step would be for me to go to court. Could not believe they way I was treated. They said if they showed me other vehicles where the leather was the same would I be satisfied. They showed be MDX with 65k mileage and the seats looked better then mine. I am not heavy and can no one can believe how crappy the seats look. My concern is with only;y 23000 miles, what will it look at when the car has 60k. Anyone else have same issues and suggestions on who I should speak with next. Calling care in CA has not gone to far. Thanks
|
- #6423 of 6469
-
Re: Leather Seats; [mweinstein2]
by upstatedoc
-
Oct 10, 2007 (12:41 pm)
-
|
|
Replying to: mweinstein2 (Oct 10, 2007 12:33 pm)
My '04's seats started creasing from day one. I just thought it was my weight. Now I think it is from poor quality leather as I have compared them to the leather in my '07 sport w/ not a crease after almost 10k miles.
|
- #6424 of 6469
-
Re: Leather Seats; [mweinstein2]
by tidester HOST
-
Oct 10, 2007 (7:04 pm)
-
|
|
Replying to: mweinstein2 (Oct 10, 2007 12:33 pm)
Today I met with regional service manager that said it was normal wear.
One might regard it as normal wear - for inferior leather.
tidester, host
SUVs and Smart Shopper
|
- #6425 of 6469
-
Re: Leather Seats; [tidester]
by mweinstein2
-
Oct 11, 2007 (6:45 am)
-
|
|
Replying to: tidester (Oct 10, 2007 7:04 pm)
The fact that the regional service manager said that their was no one else for me to speak to after him and my next step would be to take them to court is ridicolus and insulting. I was hoping someone on the forum would know the best way to deal rather then just calling Acura corporate
|
- #6426 of 6469
-
Subwoofer in '04
by upstatedoc
-
Nov 02, 2007 (5:29 am)
-
|
Scottm123,
I believe you have had issues w/ the subwoofer in your pre '07 MDX. Am I right? I have had the vibration from it as well for a long time and now it is out of warranty. Is there anything I can do myself to lessen this vibration? I have had to turn the bass down to almost zero to get rid of the noise. Thanks
|
- #6427 of 6469
-
New Brakes
by upstatedoc
-
Nov 02, 2007 (12:48 pm)
-
|
Just had new brakes put on the '04 all the way around, not cheap $950 for pads and rotors. I had two estimates and both places (Acura and Monro) suggested it needed to be done. Some people i've talked to wonder why the brakes went out after only 50k miles. Has anyone else had to replace the brakes so soon?
|
- #6428 of 6469
-
Re: New Brakes [upstatedoc]
by dmz616
-
Nov 02, 2007 (2:29 pm)
-
|
|
Replying to: upstatedoc (Nov 02, 2007 12:48 pm)
I have an 02, just replaced brakes at 90K, pads still had some left, rear more than front.
|
- #6429 of 6469
-
Metallic Rattle upon Deceleration
by dmz616
-
Nov 02, 2007 (2:46 pm)
-
|
|
I have an 02 MDX with 90K. When I rev the engine up to 3k+ RPMs (while in park or neutral), I get a metallic rattle only when I first let off on the gas; that sounds like it is coming from the lower part of the engine. Just had catalytic converter replaced at 80K. Dealer says the noise seems to be coming from the area where the y-pipe comes from the engine, but has not be able to diagnose the problem. Any suggestions?
|