Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs GMC Yukon GMC Yukon XL and Yukon XL Denali
4070 messages, Last post on Nov 24, 2009 at 8:08 AM
You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester
I have regular yukon and want to make it look like an denali yukon EXactly what parts do I need thanks
|
|
| Has anyone had transmission problems with their 2002 Yukon? I've burned 2 transmission! one at 35k and another at 77K. I dropped it off at the dealer and I figure it's worth a fight to get them to replace it. I don't think I have much of a chance. Are there any resources out there to help me out. I figure it will cost around 3K or so. | |
|
Replying to: y2kgts (May 30, 2001 1:14 pm) Please let me know what was causing your problem. The GMC place can't find my problem. Thanks, Vernis Stanaland Tyler, Texas |
|
|
We have a 2005 YXL with captains chairs front and middle (room for 4). We have the 3rd row rear bench seat that is either up or down. Unfortunately, with 5 passengers, we can't have the seat down when we need more space in the rear. Does anyone know of an aftermarket conversion that will allow a Split 3rd row seat in the XL? The Yukon has the split seat option for the 3rd row, why not the Yukon XL? Thanks |
|
|
Replying to: isaace (Dec 09, 2005 8:16 pm) |
|
|
Replying to: jovatious (Dec 03, 2005 12:12 pm) -Replace entire front bumper assembly -Replace front grill -Replace side lower assist steps -Replace rear bumper -Replace chrome side door moldings with color-keyed Denali one -Replace headlight/front turn signal/foglight housings (and appropriate bulbs as well--e.g., Denali low beam uses 9005 instead of 9006) -Add Denali front/rear mud flap moldings (they're not really mud flaps but look at a Denali and you'll see what I'm referring to) -Add Denali lettering to sides of vehicle There may be a few other things I left out (e.g., if your side mirrors don't have the motorized fold in/out option and/or no puddle lights, you'll need to replace those too, although you may need some additional stuff in order to get the mirrors to fold in/out by themselves) but I think the above covers most of the major stuff...and that's just for the exterior--the interior of course is a whole different story. I assume you're probably gonna try to find these parts at a junkyard or something 'cuz the cost for all of the above stuff brand-new ain't cheap...IOW you'd almost be better off just buying a Denali instead of trying to cosmetically change your Yukon into one. |
|
|
Just bought a New 05 Yukon XL (1/2 ton). We have it about 10 days and the Odometer is less than 500 miles. We have noticed a weird sound underneath the car soon after taking delivery. What happened is that when we parked our car in the garage and back out, shift into drive, step on the gas pedal, within 5 to 10 seconds, there is a grinding sound coming from the front of the car for about half second and it is gone. It only happens on the first circle and the rest of the driving is OK. But it happens everytime I back and drive. I took the car to the dealership, they had three technicians look at it and none of then could find the cause of the problem. Finally, they tested another 05 XL and they claimed that that car makes the same noise. I went there I test-drove it and it did make the same buzz noise. They then told me that it is totally normal for 05 XL! I don't beleive them and then I come here to see whether there are 05 XL owners who have the same problem. Thank you and Merry Cristmas!
|
|
|
|
|
Replying to: g_gsmith (Dec 22, 2005 7:10 am) I can't say I've had that problem. At least they could recreate it on another vehicle. Do you have 2WD or 4WD? Is this happening on dry pavement? Is it while turning or pointed straight? If you park and then go into drive again does it happen, or only after you've gone from Reverse to Drive? I guess mine makes a little bit of a noise when the steering wheel is totally locked to one side or another, but not when going straight that I've noticed. I'll try again and pay attention today.
|
|
|
Replying to: alampert (Mar 19, 2002 2:46 pm) I use mobile 1 synthetic oil also. My co work has a 97 yukon He was just told he had bad barren he has 107,000 he as change his oil as manufacture recommended. |
|
You are here:
Forums
SUVs GMC Yukon GMC Yukon XL and Yukon XL Denali
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 GMC Yukon XL
Browse by Board
Browse by Topic
Today's Chats
