Last post on Dec 02, 2013 at 4:13 PM
You are in the Ford Escape
What is this discussion about?
Ford Escape, Mazda Tribute, SUV
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#4126 of 4149 nothing like off shore parts
Feb 25, 2013 (8:16 am)
computer hiccup? or the filter is clogged?
#4127 of 4149 Re: faint thumping sound left side [explorerx4]
Feb 25, 2013 (8:18 am)
they dont make them like they used to. Take a look at Magna.com, I could not believe how many parts they make for the big 6.
yes, U joint needed to be replaced. plus an alignment.
#4128 of 4149 Re: nothing like off shore parts [printerman1]
Feb 25, 2013 (2:29 pm)
"computer hiccup? or the filter is clogged? "
Ford confirmed a bad batch of circuit cards for certain 2009 models. The later models are being included out of caution by the NTSB.
#4129 of 4149 Re: Mazda Tribute 03 window seal leaking [reb22]
Mar 09, 2013 (2:46 pm)
I own a 2009 Tribute and have noticed some of the same things you report. Any metal piece on my vehicle, front to back, inside or out, seems to be rusting.
The fixtures which attach the seat to the car as you mention rust. The bolts holding the windshield wipers are rusting. In the rear hatch the bolts sticking up are rusting.
I have not noticed any water in the front of the vehicle, but the rear seal around the window in the hatch needed replacing (under warranty).
Seems that the same problems are still there.........unsolved.
#4130 of 4149 rust rust, the tin car or tin man
Mar 09, 2013 (4:30 pm)
for car companies, cheaper the better. Most car companies outsource most components, look at the Magna website. Or go to FB and find Mazda, complain online. I have a 2011 Escape, sounds like a Chinese sewing machine, cheap.
#4132 of 4149 Can unplugged DPFE lead to EGR blowout?
Mar 18, 2013 (7:41 am)
Saturday, my wife took her 2004 Ford Escape V6 in for an oil change at a locally-owned Mobil 1 franchise. The car was running beautifully before she took it in. When she left, she noticed the engine was acting a little funny and the Check Engine light was on, so she wheeled back around to the oil change place and inquired. The technician told her that it's possible some water got in the engine during the oil change or that the oil level hadn't fully been recognized by the car and that could've led to the check engine light, but regardless, she should take the car to their affiliated auto shop a few miles away for a tune-up. They reset the check engine light and sent her on her way, saying that if the light came on again, to take it into their shop to figure out what may be causing it.
After running a few errands, an hour or so later, her car suddenly wouldn't climb a hill and there was a loud hissing sound coming from under the hood. She pulled over. lifted the hood and noticed that there was an electrical wire hanging loose (we later learned, after some online research, that this was the electrical wire leading to the DPFE sensor).
We left the car on the side of the road and I took her back to the oil change place, where she proceeded to give the technician a piece of her mind, asking what could have happened and pointing out the unplugged electrical wire in the process. The technician explained that he didn't know of anything they did wrong and that the hissing sound may have something to do with the vacuum seal being knocked loose during the oil change. He said he didn't know what wire we were talking about and why it would have been unplugged. (But anyone who has ever lifted the hood on a Ford Escape would be able to see the DPFE wire unplugged -- it's right on top in the front.)
We called a tow truck and after talking to the driver for a few minutes, he took a look under the hood and noticed the blown EGR valve (http://www.flickr.com/photos/zpb52/8568114381/) and told us what it was.
We had the car towed to a reputable local shop that we've used in the past, and the head mechanic there said he's never seen an EGR fail in this manner since he's been working with them. We did find a photo online of another EGR valve that failed in nearly the exact same manner (http://www.cargurus.com/Cars/Discussion-t561_ds512410).
So -- the question I have is -- Can the unplugged DPFE sensor lead to the blown EGR? Is it possible the DPFE was unplugged accidentally (perhaps knocked loose because of its proximity to the oil well), or would it have to deliberately be unplugged? Why would someone unplug it during a routine oil change?
We are going to approach the owners of the oil change place once we are billed for the repairs about "making it right", because we fully believe their negligence (or possibly foul play) led to this failure, and we may pursue legal action thereafter if they refuse to cooperate. Any advice on this front would be appreciated as well.
Any help any of you could provide would be fantastic. Thanks.
#4133 of 4149 Re: Can unplugged DPFE lead to EGR blowout? [zpb52]
Mar 24, 2013 (4:59 am)
Except for the oil change I had exactly the same problem. What caused the the DPFE and EGR problem was excessive pressure. What caused the execss pressure was a plugged rear catalytic convertor. What plugged the rear convertor was interior of one of the front converters. What caused the front converter to come apart was excessive heat from burning raw fuel. What caused raw fuel was a misfire on one cylinder due to a failed ignition coil. I have replaced the rear catalytic converter, the EGR valve and the DPFE and am driving the car. I have not yet tackled the front converter.
Seems pretty likely your situation is the same. There are lots of reports of this occurrence on the web. Ford probably should have reconsidered a utility vehicle that can't sustain a misfire especially one with plugs that are not accessible.
#4135 of 4149 2013 Escape overheating after recall fix
Jun 29, 2013 (11:51 am)
My Escape has overheated twice now after the recall fix. There are other complaints about this on the DOT website. Do not buy this car.