Last post on Dec 02, 2013 at 4:13 PM
You are in the Ford Escape
What is this discussion about?
Ford Escape, Mazda Tribute, SUV
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#3866 of 4149 Mazda Tribute EGR Valve
Jun 18, 2010 (8:44 pm)
I own a 2005 Mazda Tribute (3.0L V6) and have been told that the EGR Valve needs to be replaced. Where I live, it has been difficult to find the part for a Mazda Tribute, but there is a Ford dealer that can order it for me. I would like to know if the 2005 Mazda Tribute and the 2005 Ford Escape share the same engine and if the EGR Valve would be the same. Thanks to anyone who can share some advice.
#3867 of 4149 Re: Mazda Tribute EGR Valve [javier5]
Jun 19, 2010 (5:04 am)
Yes they are the same motor but if you go to Ford tell them it`s a escape. You also can try Auto Zone or Advance the part is a lot less money
#3868 of 4149 Re: Mazda Tribute EGR Valve [javier5]
Jun 21, 2010 (6:34 am)
Same for both...Tribute or Escape.
Ford Part# XR1Z-9D475-BA or Motorcraft #CX-2071
List price $86.89
#3869 of 4149 Re: 03 Mazda Tribute V-6 Starting Problems [rolgon]
Jun 21, 2010 (9:42 am)
I couldn't believe it when I read both of your posts. Have had the exact same problem for almost two years. We took it to the dealer and other mechanics who could not find any problem with it. Replaced the IAC ($55) with ease and have had no more problems. What a simple fix. Why doesn't Mazda have a clue? Thank you, thank you, thank you!!!!!! Living in the desert we can now have a reliable vehicle again.
#3870 of 4149 Re: ESCAPE: DASTARDLY IDLE AIR CONTROL! [escapenut]
Jun 22, 2010 (1:44 pm)
Hope you can help, have same problem, trying to find where the Idle air control value is located? 2001 Ford Escape
#3871 of 4149 Re: ESCAPE: DASTARDLY IDLE AIR CONTROL! [frankrealt]
Jun 22, 2010 (2:40 pm)
Iddle Air Control Valve (IACV) is located bolted on the intake manifold right behind where the throttle body mounts to on a 3.0L V6
#3872 of 4149 Re: Mazda Tribute 2001 a/m stuck in reverse gear won't move [SharonMac]
Jul 05, 2010 (4:03 pm)
I spent $12 to fix mine. What happened was that the linkage pin retaining ring came out, letting the cable and the bushings come out the pin. All I did was put new bushings ($6) and retaining ring ($6 for 102 pieces).
#3873 of 4149 Re: Mazda Tribute 2001 a/m stuck in reverse gear won't move [mekaniko1]
Jul 08, 2010 (7:33 am)
Did you have to go to Mazda to get the bushings? I know that Mazda will only sell the complete cable assy and not the retainer separately to the tune of $80. Since the cable popped off I need to find a diagram of the assy to see how bushings, cable, etc go together. What style of retaining ring did you use?
#3874 of 4149 Repair Manual for a 08 Mazda Tribute
Jul 26, 2010 (9:27 am)
Does anyone know where there is a repair manual I can get for an 08 Mazda Tribute? Thanks
#3875 of 4149 Re: Repair Manual for a 08 Mazda Tribute [youravonrep]
by Stever@Edmunds HOST
Jul 26, 2010 (9:29 am)
Sometimes you can get lucky at your local library (without even going there).
Online Repair Manuals