You are here: Forums SUVs GMC Yukon GMC Yukon / Yukon Denali

GMC Yukon / Yukon Denali

3260 messages,  Last post on Apr 28, 2009 at 7:02 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, GMC Yukon, SUV

Messages Page 323 of 327 1 ... 320 321 322 323 324 325 326 327 Prev Next Last

Go To Msg # Search This Discussion

#3214 of 3260 Quadrasteer Reliability by c650 Apr 13, 2008 (5:56 pm)
I'm interested in a 2003 Yukon XL, 2500 4X4 with Quadrasteer. Only 44,000 miles. Any data on the long term reliability of the Quadrasteer? Turns like a dream, since it was only in produciton for a couple of years, hard to find experiences with reliability. Replies to this message: obyone (Apr 13, 2008 7:00 pm)
#3215 of 3260 Re: Quadrasteer Reliability [c650] by obyone Apr 13, 2008 (7:00 pm)
Replying to: c650 (Apr 13, 2008 5:56 pm) From what I've read on it there were no long term issues. Quadrasteer was dumped by GM because potential owners couldn't justify the upfront initial cost of the system which was around $5k.
#3216 of 3260 Yukon AC compressor by 95c220 Jun 08, 2008 (4:40 am)
Any one know the best place to buy an 2033 GMC Yukon XL AC compressor? Replies to this message: obyone (Jun 08, 2008 2:48 pm)
#3217 of 3260 Re: Yukon AC compressor [95c220] by obyone Jun 08, 2008 (2:48 pm)
Replying to: 95c220 (Jun 08, 2008 4:40 am) Don't think they make those yet.
#3218 of 3260 2004 yukon driver's side power window by goodjeans Jun 19, 2008 (6:00 am)
My Yukon's driver's side window was working fine. Then it stopped all of a sudden with just a clicking sound when I hit the button. A little while later it began working again. It worked for a week, then rose slowly this morning. Is it the motor? What could be the problem. The other three windows work fine. Thanks. I am in the wrong forum but couldn't figure out where to post on gmc Yukon. Replies to this message: rsht (Jun 19, 2008 10:45 am) obyone (Jun 19, 2008 11:19 am) steve_ (Jun 19, 2008 11:28 am) obyone (Jun 19, 2008 12:59 pm)
#3219 of 3260 Re: 2004 yukon driver's side power window [goodjeans] by rsht Jun 19, 2008 (10:45 am)
Replying to: goodjeans (Jun 19, 2008 6:00 am) If your Yukon is still under warranty, bring it to your GMC Service Department and have it checked/repaired. Otherwise, I would remove the switch panel out of the handle and disconnect the plug to your driver side window (make sure you know the wiring scheme first) then by-pass the switch to open/close the window with a jumper wire (probably a 12 or 14 GA wire) to determine if its the switch that's faulty or really the motor...   PLEASE NOTE, if you jump the wrong leads, you may potentially fry the motor and even your electrical system, so do this at your own risk. Make sure you know what you are doing, or leave it to your GMC professionals. Good Luck!
#3220 of 3260 Re: 2004 yukon driver's side power window [goodjeans] by obyone Jun 19, 2008 (11:19 am)
Replying to: goodjeans (Jun 19, 2008 6:00 am) GM is famous for motor failure on their power windows. 99% probablility on that one. Rarely, if ever, does the switch fail. Replies to this message: steve_ (Jun 19, 2008 11:28 am) obyone (Jun 19, 2008 12:59 pm)
#3221 of 3260 Re: 2004 yukon driver's side power window [obyone] by steve_ HOST Jun 19, 2008 (11:28 am)
Replying to: obyone (Jun 19, 2008 11:19 am) Seems odd to me that the motor wouldn't just quit, but would try to work in fits and starts. But I'm no mechanic... (but I do have a window switch in my Nissan that carbons up now and then and gets flaky). Replies to this message: obyone (Jun 19, 2008 12:59 pm)
#3222 of 3260 Re: 2004 yukon driver's side power window [steve_] by obyone Jun 19, 2008 (12:59 pm)
Replying to: steve_ (Jun 19, 2008 11:28 am) At one time GM used to sell the switch and motor together. They had so many failed motors that they discontinued the practice in order to save money on the switches. Especially when performed under warranty.   Been there done that several times. 2000 Silverado, 2002 Yukon Denali or the GMT 800 platform.
#3223 of 3260 1995 seat wiring by rudepup Jul 28, 2008 (8:23 pm)
Hi, I have a 1995 yukon that had manual seats witha power lumbar control I am converting it to a set of full power ones my wiring harness has two orange and one black wire the new seats have two orange anoe black and one brown. What does the brown do?

Messages Page 323 of 327 1 ... 320 321 322 323 324 325 326 327 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon / Yukon Denali