- #3134 of 3260
-
Re: 05 Yukon Denali XL Grinding/Metal On Metal Brake Noise [alexp98]
by awf_axis
-
Jul 14, 2006 (4:32 pm)
-
|
|
Replying to: alexp98 (Jul 14, 2006 4:24 pm)
Have you checked to see if a coating of rust develops during the night?
|
- #3135 of 3260
-
Re: 05 Yukon Denali XL Grinding/Metal On Metal Brake Noise [awf_axis]
by alexp98
-
Jul 14, 2006 (5:01 pm)
-
|
|
Replying to: awf_axis (Jul 14, 2006 4:32 pm)
Yes, there isn't any rust. That is the same thing the service rep asked me.
A good example was about 2 weeks ago. I parked my SUV outside from 2PM until 11PM. I don't think there would have been enough time for rust to form or is that enough time for some sort of film to coat the rotors?
|
- #3136 of 3260
-
Back Up Camera Constraint
by 07denalitx
-
Jul 16, 2006 (10:46 am)
-
|
|
I have taken delivery of an 07 Denali with NAV and no camera (I couldn't wait). Does anyone know if the wiring harness is in the liftgate so that I can simply connect the camera when it becomes available??
|
- #3137 of 3260
-
Re: Seatbelts [awf_axis]
by ddegraw
-
Jul 18, 2006 (3:25 pm)
-
|
|
Replying to: awf_axis (Jul 12, 2006 2:05 pm)
Thanks, Dave. Will take it in and have them fix it!
|
- #3138 of 3260
-
2004 Yukon Denali
by hiten
-
Jul 19, 2006 (10:05 am)
-
|
Does anyone know if 04 Denali is equipped with a fuel filter? I went to a GM dealer this morning and they called me back saying that 04 denali's are not equipped with a fuel filter.
just curious if anyone came across this?
|
- #3139 of 3260
-
RE: 03 YUKON AIR CONDITIONING BELT [tharris1]
by bpotts1
-
Jul 29, 2006 (2:31 pm)
-
|
|
Replying to: tharris1 (Jul 09, 2006 8:48 pm)
I am having the same exact problem and the mechanic I took my car to said that he has seen this exact thing (3) times in the past couple weeks but cannot fix it. I replaced by belt and tensioner but this did not work. The sound actually got worse. I am taking the car to a dealer today and we'll see what happens. This should be a recall issue if it is that common. Let me know if you find anything out. (I have an 03 Yukon 5.3L)
|
- #3140 of 3260
-
RE: 03 YUKON AIR CONDITIONING BELT [tharris1]
by steins4
-
Jul 31, 2006 (4:00 am)
-
|
|
Replying to: tharris1 (Jul 09, 2006 8:48 pm)
I had the same trouble with my 03. I had to replace the A/C compressor. The GMC dealer paid for it because I had just purchased the vehicle 3 months ago (it would have cost around $500).
I hope your trouble is not as severe.
|
- #3141 of 3260
-
RE: 03 YUKON AIR CONDITIONING BELT [tharris1]
by ssbmg
-
Jul 31, 2006 (7:41 am)
-
|
|
Replying to: tharris1 (Jul 09, 2006 8:48 pm)
I also had my AC belt break off. I had to replace the AC compressor and condenser. I found the compressor refurbished online for a couple hundred bucks and with the condenser and a couple other minor parts had the entire AC system replaced for less than 500 total. Make sure that you flush out the AC lines before installing a new compressor. When my original compressor went dead, it sent metal particles throughout my AC lines and if I didn't (luckily) have it flushed prior to running the new system, it would've seized up and had to be replaced again!
|
- #3142 of 3260
-
RE: 03 YUKON AIR CONDITIONING BELT [steins4]
by bpotts1
-
Jul 31, 2006 (7:45 am)
-
|
|
Replying to: steins4 (Jul 31, 2006 4:00 am)
I took my car to the GMC dealer and it looks like I will have to replace my compressor as well. I hear that this is a common problem. Does anyone know if this is a potential recall item or has anyone else been able to get GMC to cover this? My car is an '03 with 88,000 mi and I dont have an extended warranty. They are qutoing me between $600-$1000 to fix.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
