Sign In Join 



Chevy Blazer/GMC Jimmy

511 messages,  Last post on Nov 29, 2009 at 11:19 AM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, GMC Jimmy, SUV


Messages Page 48 of 52
1
...
45
46
47
48
49
50
51
52
Prev
Next
Last
Go To Msg #
Search This Discussion

#465 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [jlflemmons] by gmck9
May 14, 2008 (3:38 am)
Reply

Replying to: jlflemmons (May 07, 2008 4:21 am)

well, I have a great story that happened to me with the warranty work......I took the Jimmy to a "Napa auto care" facility, which I thought were on the same level as the dealership. Well, this one I went to in Eden, N.C. takes the cake for scam artists!!!!!! After the Jimmy was approved for the warranty work on the upper control arm bushings, they started the work on 5/12/08. To make a long story short....they got the approval for (4) bushings 2 per side at $13.00 each bushing. The Napa bushings that they were supposed to be using(because they are a Napa auto care facility) were $23.00 each bushing. Advanced auto bushings were $9.00 each, and the Autozone bushings were $6.00 each. So I asked him what ones did he put in, and after stuttering for 5 minuits, he spit out.....uuuuh.....Autozone.
I fell out!!!!!!!! Here the guy was surely aware that I only wanted top end parts on the car (I told him this 10 times) I told him I'd pay the difference, and he still went behind my back and installed the cheap jap crap parts just to make $30.00 off the parts. The first thing I did was report him to Napa auto care (the regional manager is going there today...5/14/08 to remove the Napa name. This guy was using the Napa name to draw customers in, then he puts the cheapest parts on the car he could find.....making people think hes using Napa parts!!!!!!! Holy cow right? And the regional manager is paying for the repairs on my vehicle out of his expense account for what happened(he doesnt weant me to go national with this probablly) BE CAREFUL OUT THERE!!!
#466 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [gmck9] by jlflemmons
May 14, 2008 (4:41 am)
Reply

Replying to: gmck9 (May 14, 2008 3:38 am)

I have to ask, did it fix the problem???
#467 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [jlflemmons] by gmck9
May 14, 2008 (9:49 am)
Reply

Replying to: jlflemmons (May 14, 2008 4:41 am)

well, havent picked up the car yet....today is 5/14/08. Ill let ya know this weekend....I'm dropping the car off to another facility which is doing the repairs over putting in the moog brand parts at no cost to me. can you believe that mess....Autozone junk!!!!!
#468 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [jlflemmons] by gmck9
May 15, 2008 (3:56 am)
Reply

Replying to: jlflemmons (May 14, 2008 4:41 am)

MAn bad news.....noise still there.....I think Im gona put this piece of junk up for sale.....Im not gona mess with this junk any more.....not 1 mechanic on this earth can figure out what it is.....and the noise is bad enough where Im not gona wait around to find out what is gona be a huge repair down the road.........something is slapping the frame or something solid as the frame or engine or tranny.....I though gmc's were good? But i guess I got the only
#469 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [gmck9] by jlflemmons
May 15, 2008 (5:22 am)
Reply

Replying to: gmck9 (May 15, 2008 3:56 am)

Well, I wish I could hear the noise and give you a hand. These little beasts are just not that complicated, so I cannot imagine why the mechanics cannot locate the noise.
 
Don't let this issue sour you on the S series vehicles. I have had five and all have been very dependable vehicles. I have to believe that these guys are missing something obvious like a motor or tranny mount loose, spring pad missing, something like that. There just aren't that many things under there to go clunk.
 
Jim
#470 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [jlflemmons] by gmck9
May 15, 2008 (5:33 am)
Reply

Replying to: jlflemmons (May 15, 2008 5:22 am)

I looked at more forms, and some were saying the shock mount can wear out and cause looseness.....I'd think it would be an obvious thing we can see.....I can grab the driver side shock and twist it, which it makes a slight clunking(same noise)......is this something that can be replaced? Or will I have to have new mounts welded on? This is happening on both sides.....all the mechanics were all over the front shocks....no one thought the play was a concern.....should there be ANY play there? I wouldnt think so........
#471 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [gmck9] by gmck9
May 15, 2008 (8:20 am)
Reply

Replying to: gmck9 (May 15, 2008 5:33 am)

Well, let me remove the last post......the towers werent wallowed out, but they were kinda pushed apart, which just took a little grunting and I pulled it together. However what I didnt notice until then was the rocket science mechanic had put in the lower ball joint bolts upside-down, causing the bolt to dig into the boot that holds the greese- he wins the ASE mechanic of the week award!!!!! Is it just North Carolina or does this happen elsewhere......now I've been scammed by the Napa auto care guy with the Autozone parts that were supposed to be Napa parts, and now the ASE mechanic of the week mishap> My poor car
#472 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [gmck9] by jlflemmons
May 15, 2008 (8:22 am)
Reply

Replying to: gmck9 (May 15, 2008 8:20 am)

Have you considered a GM service department???
 
(ducking and running for cover )
#473 of 511
Re: HELP!!!! clunk in front end HELP!!!!!!! [jlflemmons] by gmck9
May 15, 2008 (8:19 pm)
Reply

Replying to: jlflemmons (May 15, 2008 8:22 am)

ROFL!!!!!!! ...Well, after this mess gets taken care of(the napa control arm bushings put back in), yes I agree a dealer is gona be the safest bet. Where I moved from my local mechanic had a jimmy also for a personal vehicle, so he was all up on these things. That is a 5hr drive one way or I'd be going to him. Looks like i have some dealer shopping to do, but I'll surely let ya know progress on the noise for you and other people reading this whole post
#474 of 511
GMC Jimmy ECM Fuse by darren04
May 16, 2008 (9:59 pm)
Reply
Hey everyone,
 
Im stumped...1995 GMC Jimmy, The ECM fuse (fuse #10) keeps blowing in my truck, which causes the truck to stall out until fuse is replaced. I've looked for loose wires, shorts everything and I cant figure out why it keeps blowing! Anyone have any help? What should I check since its just the ECM fuse blowing?
 
Thanks,
 
Darren

Messages Page 48 of 52
1
...
45
46
47
48
49
50
51
52
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement