You are here: Forums SUVs Chevrolet Blazer Chevy Blazer/GMC Jimmy

Chevy Blazer/GMC Jimmy

511 messages,  Last post on Nov 29, 2009 at 11:19 AM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, GMC Jimmy, SUV

Messages Page 33 of 52 1 ... 30 31 32 33 34 35 36 ... 52 Prev Next Last

Go To Msg # Search This Discussion

#316 of 511 Re: 1995 chevy s10 blazer isnt engaging [christy73] by patel1 Dec 05, 2005 (8:29 pm)
Replying to: christy73 (Dec 05, 2005 2:04 pm) you should press eather button when you are in park, then when it is blinking still, shift to reverse or drive and it should work
#317 of 511 1995 chevy s10 blazer by christy73 Dec 05, 2005 (10:15 pm)
how do i replace the bulb in the back of the truck i cant figure how to get the cover off to fond out what sorta bulb i need
#318 of 511 Re: I think I might can help... [my_blazer2000] by fiverailer Dec 07, 2005 (4:56 pm)
Replying to: my_blazer2000 (Apr 30, 2005 10:11 pm) My "SERVICE ENGINE LIGHT" is constantly on, i didn't think it was because of the real problem that i have. The real problem now is that i live in Nebraska and we have had consecutive nights of weather below 0, not easy on my blazer which has a heating issue. Its not a issue with the truck heating up, engine tempurature comes up just fine, takes a little while before the fan produces any hot air in the interior. it is now 6 years old pretty much and just had i believe it's first proper radiator flush and the thermostat as well. Without the fan on it seems to get hot, specially around the vents.....i turn the fan up and slowly the air becomes luke warm, if that even. I can turn the fan off let it ride a lil and turn it back on and gets warm again. I wish i knew why it was doing this, I am afraid that it is the heater core and am hoping that it is just a sensor or electrode messing it up. If you can help that would be great. Peace
#319 of 511 Re: !!!!!WARNING!!!!! READ IF YOU HAVE A BLAZER [blazer1202] by chevyladyinpa1 Dec 10, 2005 (5:48 pm)
Replying to: blazer1202 (Nov 20, 2000 7:10 pm) Hello Blazer owners I am a new Blazer owner just bought my first 4 months ago. Got a 2000 Chevy Blazer ( my dream vehicle).I have always wanted one. Well I am having troubles and no one seems to know what could be causing it. I have no heat. and with living in PA with temps lately in the 20's everyday it gets pretty chilly without a heater. It is odd had heat till Thanksgiving day, went out and started the truck and just didn't seem to warm up. I thought might be due to that it was only 11 degrees out, the next week had heat back but it was warmer too. Now this past week i barely have any you can feel it there, but just no where near as warm as should be or was. Now I have had talked to about 10 different mechanics including my dad who has worked on Chevy's for 40 yrs. They all seem to be lost. Seems to be blowing both cold and luke warm air. We have changed the thermostat. The fluids are full the radiator is full. The hises that go into the heater core are warm to touch, but i was told you should not be able to sit there and hold them and you can. Please Help!!! Replies to this message: cman99 (Dec 18, 2005 10:40 am) glenn2934 (Dec 27, 2005 5:31 pm)
#320 of 511 Re: problem [patel1] by chevyladyinpa1 Dec 10, 2005 (6:07 pm)
Replying to: patel1 (Dec 04, 2005 8:19 pm) I am not sure if you were replying to my message but I NEED HELP!!!!! Hello Blazer owners I am a new Blazer owner just bought my first 4 months ago. Got a 2000 Chevy Blazer ( my dream vehicle).I have always wanted one. Well I am having troubles and no one seems to know what could be causing it. I have no heat. and with living in PA with temps lately in the 20's everyday it gets pretty chilly without a heater. It is odd had heat till Thanksgiving day, went out and started the truck and just didn't seem to warm up. I thought might be due to that it was only 11 degrees out, the next week had heat back but it was warmer too. Now this past week i barely have any you can feel it there, but just no where near as warm as should be or was. Now I have had talked to about 10 different mechanics including my dad who has worked on Chevy's for 40 yrs. They all seem to be lost. Seems to be blowing both cold and luke warm air. We have changed the thermostat. The fluids are full the radiator is full. The hises that go into the heater core are warm to touch, but i was told you should not be able to sit there and hold them and you can. Please Help!!! Replies to this message: makpiette (Dec 12, 2005 7:22 am)
#321 of 511 Re: problem [chevyladyinpa1] by makpiette Dec 12, 2005 (7:22 am)
Replying to: chevyladyinpa1 (Dec 10, 2005 6:07 pm) I had the same issue, and fixed it this weekend. Try flushing the heater core.
#322 of 511 Physco Turn Signal by makpiette Dec 12, 2005 (7:27 am)
While driving, I can hear my turn signal flasher clicking, but I have not turned on my signal. The signal indicator isn't lighting up, but the flasher is clicking. It is purely random, but does it continually. The turn signals work fine when I do turn them on. I replaced the flasher, but same issue. I'm guessing a short somewhere, but before I spend hours trying to track it down, wondered if anyone has any ideas of an easy fix. Replies to this message: izecold (Apr 14, 2006 1:49 pm)
#323 of 511 Turn Signal Constant Clicking! by marlonfloreslc Dec 14, 2005 (9:34 am)
This is the most anoying thing in the world! I'm driving and it sounds like my turn signals are on. Does anyone know how I can fix this problem before I drive this thing off a cliff. Thanks Replies to this message: makpiette (Dec 15, 2005 6:03 am) steve_ (Dec 15, 2005 9:49 am) bsc338 (Dec 26, 2005 2:47 pm) izecold (Apr 14, 2006 1:43 pm)
#324 of 511 Re: Turn Signal Constant Clicking! [marlonfloreslc] by makpiette Dec 15, 2005 (6:03 am)
Replying to: marlonfloreslc (Dec 14, 2005 9:34 am) The other forum has some info on this issue. From what I can tell from my research, it appears to be a 'multi-function switch' (ACDelco part #D6254C) located in the turn signal lever. I am no mechanic, but it appears you have to replace the lever and switch mechanism. I found the switch in question at www.rockauto.com for $105.89. Installation may be another issue - I don't know what it will take to install, but could be a b*tch. I suggest taking it to a dealer for a free quote and confirm it is that switch/lever assembly. Then if you aren't comfortable installing it yourself, find a local mechanic to do it. That is my plan, anyway. Or if you are really cheap and don't use your blinkers, you could always unplug the flasher (behind the glove box). Replies to this message: steve_ (Dec 15, 2005 9:49 am) bsc338 (Dec 26, 2005 2:47 pm) izecold (Apr 14, 2006 1:43 pm)
#325 of 511 god help me, electrical problems by drew_5_2 Dec 15, 2005 (8:07 am)
I have a 96 blazer. A fuse keeps blowing and when it does all of the gages go dead and the altinator stops charging the battery. I've replaced the fuse and it will work for a while but then it will blow again. I think it is a loose/pinched wire however I have no idea which wires to check.

Messages Page 33 of 52 1 ... 30 31 32 33 34 35 36 ... 52 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Chevrolet Blazer Chevy Blazer/GMC Jimmy