Sign In Join 



Chevy Blazer/GMC Jimmy

511 messages,  Last post on Nov 29, 2009 at 11:19 AM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, GMC Jimmy, SUV


Messages Page 33 of 52
1
...
30
31
32
33
34
35
36
...
52
Prev
Next
Last
Go To Msg #
Search This Discussion

#313 of 511
adjusting lights by christy73
Dec 05, 2005 (2:05 pm)
Reply
how do i adjust my headlights they seem to be pointing downwards hi and low beams
#314 of 511
Re: power seats please help !!!! [christy73] by mrakes
Dec 05, 2005 (6:52 pm)
Reply

Replying to: christy73 (Dec 05, 2005 1:58 pm)

I have a 1997 blazer 4x4 that had the same issue. My power door locks as well as my power seat quit working. I replaced the fuse w/ a relay for testing. I tried door locks, seats and all worked fine. When I sat in the driver seat, the relay tripped. I began checking the wiring under the seat and saw nothing apparent. Once I removed the driver's seat I notice the power lumbar support wires that ran between the seat frame and the seat had became raw. I removed the switch, taped up the wiring and re-ran the wires thru the hole in the seat frame (which I believe is where it should have been from the factory) and have not had any problems in over 6 months.
#315 of 511
Re: adjusting lights [christy73] by 4hourmechanic
Dec 05, 2005 (7:35 pm)
Reply

Replying to: christy73 (Dec 05, 2005 2:05 pm)

If it is like my 93 blazer, there should be a screw to the right or left, and right above the headlight (it might be a torx) and you turn them to adjust the direction. Park like 20 feet away from a wall, so that you can see the beam, and adjust accordingly.
#316 of 511
Re: 1995 chevy s10 blazer isnt engaging [christy73] by patel1
Dec 05, 2005 (8:29 pm)
Reply

Replying to: christy73 (Dec 05, 2005 2:04 pm)

you should press eather button when you are in park, then when it is blinking still, shift to reverse or drive and it should work
#317 of 511
1995 chevy s10 blazer by christy73
Dec 05, 2005 (10:15 pm)
Reply
how do i replace the bulb in the back of the truck i cant figure how to get the cover off to fond out what sorta bulb i need
#318 of 511
Re: I think I might can help... [my_blazer2000] by fiverailer
Dec 07, 2005 (4:56 pm)
Reply

Replying to: my_blazer2000 (Apr 30, 2005 10:11 pm)

My "SERVICE ENGINE LIGHT" is constantly on, i didn't think it was because of the real problem that i have. The real problem now is that i live in Nebraska and we have had consecutive nights of weather below 0, not easy on my blazer which has a heating issue. Its not a issue with the truck heating up, engine tempurature comes up just fine, takes a little while before the fan produces any hot air in the interior. it is now 6 years old pretty much and just had i believe it's first proper radiator flush and the thermostat as well. Without the fan on it seems to get hot, specially around the vents.....i turn the fan up and slowly the air becomes luke warm, if that even. I can turn the fan off let it ride a lil and turn it back on and gets warm again. I wish i knew why it was doing this, I am afraid that it is the heater core and am hoping that it is just a sensor or electrode messing it up. If you can help that would be great. Peace
#319 of 511
Re: !!!!!WARNING!!!!! READ IF YOU HAVE A BLAZER [blazer1202] by chevyladyinpa1
Dec 10, 2005 (5:48 pm)
Reply

Replying to: blazer1202 (Nov 20, 2000 7:10 pm)

Hello Blazer owners I am a new Blazer owner just bought my first 4 months ago. Got a 2000 Chevy Blazer ( my dream vehicle).I have always wanted one. Well I am having troubles and no one seems to know what could be causing it. I have no heat. and with living in PA with temps lately in the 20's everyday it gets pretty chilly without a heater. It is odd had heat till Thanksgiving day, went out and started the truck and just didn't seem to warm up. I thought might be due to that it was only 11 degrees out, the next week had heat back but it was warmer too.
Now this past week i barely have any you can feel it there, but just no where near as warm as should be or was. Now I have had talked to about 10 different mechanics including my dad who has worked on Chevy's for 40 yrs. They all seem to be lost. Seems to be blowing both cold and luke warm air. We have changed the thermostat. The fluids are full the radiator is full. The hises that go into the heater core are warm to touch, but i was told you should not be able to sit there and hold them and you can.
Please Help!!!
#320 of 511
Re: problem [patel1] by chevyladyinpa1
Dec 10, 2005 (6:07 pm)
Reply

Replying to: patel1 (Dec 04, 2005 8:19 pm)

I am not sure if you were replying to my message but I NEED HELP!!!!!
Hello Blazer owners I am a new Blazer owner just bought my first 4 months ago. Got a 2000 Chevy Blazer ( my dream vehicle).I have always wanted one. Well I am having troubles and no one seems to know what could be causing it. I have no heat. and with living in PA with temps lately in the 20's everyday it gets pretty chilly without a heater. It is odd had heat till Thanksgiving day, went out and started the truck and just didn't seem to warm up. I thought might be due to that it was only 11 degrees out, the next week had heat back but it was warmer too.
Now this past week i barely have any you can feel it there, but just no where near as warm as should be or was. Now I have had talked to about 10 different mechanics including my dad who has worked on Chevy's for 40 yrs. They all seem to be lost. Seems to be blowing both cold and luke warm air. We have changed the thermostat. The fluids are full the radiator is full. The hises that go into the heater core are warm to touch, but i was told you should not be able to sit there and hold them and you can.
Please Help!!!
#321 of 511
Re: problem [chevyladyinpa1] by makpiette
Dec 12, 2005 (7:22 am)
Reply

Replying to: chevyladyinpa1 (Dec 10, 2005 6:07 pm)

I had the same issue, and fixed it this weekend. Try flushing the heater core.
#322 of 511
Physco Turn Signal by makpiette
Dec 12, 2005 (7:27 am)
Reply
While driving, I can hear my turn signal flasher clicking, but I have not turned on my signal. The signal indicator isn't lighting up, but the flasher is clicking. It is purely random, but does it continually. The turn signals work fine when I do turn them on. I replaced the flasher, but same issue. I'm guessing a short somewhere, but before I spend hours trying to track it down, wondered if anyone has any ideas of an easy fix.

Messages Page 33 of 52
1
...
30
31
32
33
34
35
36
...
52
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement