Sign In Join 



Infiniti QX4

2092 messages,  Last post on Aug 02, 2009 at 3:34 PM

You are in the Infiniti QX4 Forum. Your Hosts are steve_ & tidester

What is this discussion about? Infiniti QX4, SUV


Messages Page 209 of 210
1
...
204
205
206
207
208
209
210
Prev
Next
Last
Go To Msg #
Search This Discussion

#2073 of 2092
Re: 2001 QX4 Stereo replacement [doulas49] by cook0513
Nov 19, 2008 (5:52 pm)
Reply

Replying to: doulas49 (Nov 19, 2008 5:35 pm)

I did not fully solve my problem, as I do not have the surplus cash to spend right now. However, I did find a solution from crutchfield that will probably solve your solution. Basically, you just need to replace the head unit, and can keep the speakers and their amps provided that they are still in good condition.
 
Here's essentially what i would get, if I had the money now:
Pioneer DEH-P7000BT - $249.99
Nissan In-dash Receiver Kit Fits select 2001-up Nissan and Infiniti models
Chassis size E - FREE
Nissan Antenna Adapter Diversity antenna to Motorola female (and male) - FREE
Nissan/Infiniti Factory Integration Adapter (THIS IS THE ADAPTER YOU NEED) - $19.99
http://www.crutchfield.com/p_142C4NN03/Nissan-Infiniti-Factory-Integration-Adapt- er.html?search=OEM+Amplifier+Adapter&tp=3486
PAC SWI-PS - $74.99
#2074 of 2092
Re: backup light replacement [swhalverson] by attavan
Dec 05, 2008 (8:37 am)
Reply

Replying to: swhalverson (Mar 05, 2007 7:37 pm)

Hi Steve: Did you ever get the answer? I have the same make and model. I have the same problem.
 
Mike
#2075 of 2092
Backup Light Replacement by attavan
Dec 05, 2008 (8:43 am)
Reply
I have a 2001 Infiniti QX4 SUV. Anyone know how to replace burned out tail light bulb? Removing the two visible screws loosens the tail light assembly but doesn't allow access to the bulb.
 
Mike
#2076 of 2092
97QX4 by lgillison
Dec 11, 2008 (4:13 pm)
Reply
Hi All QX4 owners. I purchased a 97 QX4 in February of 08. I love the vehicle. I have a concern though that centers around a grinding noise that I hear when I accelerate. The noise seems to be in the rea of the vehicle. Second. Within the last two months, I have notice what appears to be an oil leak in my garage. When I check the oil level, all seems to be fine. When I check the powersteering fluids, once again, all seems to be fine. Any suggestions?
#2077 of 2092
Re: Backup Light Replacement [attavan] by attavan
Dec 12, 2008 (2:53 am)
Reply

Replying to: attavan (Dec 05, 2008 8:43 am)

I am answering my own question. I went to an Infinity dealer and paid $40. After removing the two visible screws the mechanic just gripped the plastic assembly and yanked it outward. The burned out bulb was then accessible.
 
Mike
#2079 of 2092
Remote start by fatdaddys
Dec 13, 2008 (8:25 am)
Reply
Im looking to get one for my daughers 2004 QX4
anybody know any good deals on one?
#2080 of 2092
Re: Remote start [fatdaddys] by jiamin
Feb 12, 2009 (3:31 pm)
Reply

Replying to: fatdaddys (Dec 13, 2008 8:25 am)

I think the last year is 2003, then QX4 was discontinued.
#2081 of 2092
Replacing backup light bulbs on 2001 Infinity QX4 by papajoe1
Mar 10, 2009 (10:03 am)
Reply
I recently had to replace the backup light bulbs on my daughter's 2001 QX4 and couldn't figure out how to access them. After some thought, I told my daughter to ask the local Infinity dealer how much it would cost for them to replace them. They told her about $200.00 because it would take them at least 1-1/2 hours to do the job according to their repair manual. After hearing this, I decided that you must have to remove the rear door inside panel to access them, and that's the reason they're charging so much. I went to the local auto parts store and purchased a couple of door panel tools with the forked ends and light bulbs. By the way, the owner's manual calls for an 1156 bulb and the parts store says it takes a 921-LL (long life) bulb. As it turns out, both the owner's manual and the QX4 DVD repair manual are wrong. The 921 is the correct bulb. Removing the inside door panel is easy and the tools I bought were only about $16.00 total. The entire job took about 50 minutes, and I have never done this before. Once the door panel was removed, the lights are accessible from the back and the bulb fixtures easily twist out. I had looked on this forum sight and others for a way to do this but could find nothing. I hope this will help someone with the same problem I had. Don't forget to remove the inside lift gate handle first, then snap out the inside door panel.
#2082 of 2092
ABS PROBLEM 1997 QX4 by macco
Mar 12, 2009 (1:48 am)
Reply
My ABS light came on. I found the small motor next to ABS device on the engine side of the firewall runs after the ignition is turned off. It drains the battery. Is there a relay or solenoid that might be stuck and is causing this? If I pull the fuse for the abs, it stops the motor. Is this safe to drive without the fuse in? Any inexpensive fixes on this?

Messages Page 209 of 210
1
...
204
205
206
207
208
209
210
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement