Last post on Nov 26, 2006 at 9:18 PM
You are in the Ford F-Series
What is this discussion about?
Ford F-150, Ford F-250, Ford F-350, Ford F-100, Truck
#1466 of 2180 Re: My 2005 F150 is still vibrating! [shorepaknc]
Aug 30, 2005 (9:43 am)
Annoying is the operative word. Every time I get in this truck, I think about how much I paid to be this frustrated. Because they process these disputes using apparently, not so smart individuals, Ford and BBB both acknowledged the drive train problem in their communications. Attorney says they have shot themselves in the foot. It is going to cost me about $4000 temporarily, collectable from Ford along with all other costs, to exercise the lemon law and about 6 -9 months but mine is going back to Ford. What really makes me sick is that I traded a perfectly fine 2002 F-150 in on this junker. My 1994 Chevrolet 1/2 ton, stick shift, strippo model is a better rider.
#1467 of 2180 88 f-250 problem
Aug 30, 2005 (10:09 am)
I am new this so help me out, please.
my problem started when i melted the wires from the solenoid. and yes as a desperate woman i replaced the solenoid and everything was fine. then my husband drove it to the store and the starter got stuck, and naturally it was my fault. so he replaced the starter, and that didn't fix it, then he replaced the switch under the steering column, that didn't work so while he was at work i replaced the solenoid again, only i didn't attach the starter wire (the big black one, not the red)
at that time i was getting power to the truck. then he came home, touched the black wire to the solenoid and now no power at all.
please help me.......before i do desperate things like blow this truck up. jus kidding!
#1468 of 2180 Re: 2005 F-150 Front End Vibration [jameso]
Aug 30, 2005 (12:37 pm)
I have a 2005 FX4 with the same problem. It is not a vibration, but severe shaking. I just got home from the dealer and they are ordering a part for the steering. They had a truck in recently with the same problem and think they fixed it. They couldn't tell me exactly what the part was as their computer system was down and they needed to look up the truck that was repaired. I can let you know what they found when mine is fixed. It sounds like FORD should already be aware of this problem. I have never had anything shake this bad before and like you say, usually if you come to a complete stop it is fine when starting up again.
#1469 of 2180 f-150 cylinder misfire
Aug 30, 2005 (2:47 pm)
I got a cylinder 2 misfire reading and the guy at advance told me to replace the coil pack. Well, I did and now it will not start. I get a sound like a machine gun popping off when I try to start it. Anybody know what that is?
#1470 of 2180 accelerater
Aug 29, 2005 (5:33 pm)
i have a 2003 6.0 deisel super duty dual wheel.bought new now has 26000 on it.
has anyone out there had the displeasure of there accelerater sticking upon passing. no matter what i did would not decellerate had to brake it and shut off. dealer of course can find nothing wrong. to date they have had to replace front ball joints 15000 3 friends also needed there done (ford has no grease fittings on theres ), rear rotors (vibrations in pedal) this is a pleasure vehicle not used as a work horse.
#1471 of 2180 Re: the motor lose the power [emoreno]
Aug 31, 2005 (7:04 am)
Take to ford I just had the same problem.
ford has a recall as of july 12th I believe it will fix the problem
#1472 of 2180 Re: 97 F150 4*4 problem [mikei2]
Aug 31, 2005 (5:42 pm)
I checked into the 4wd problem further now that i had my borther in law over to help me. On the front axle there is a black disc with one pink and one blue vacuum lines on it. when I move the actuator on the front axle that is attached to this black disc with my hand the front wheels turn (the truck is up on jacks and blocks) but the actuator does not stay in. I took off each vacuum line at that disc and only the pink line has a vacuum, the blue line does not even though I have the shifter in 4hi. I then followed the blue line up to the hood next to the batter and took it off there....it appears to be mated with a white vacuum line that did have vacuum. So this leaves me thinking either it is the thing next to the battery that these twho lines plug onto or it is a sensor somewhere else on the transfer case it self that tells the blue vacuum line to start suction. Also, the 4*4 indicator light does not come on in the dash.....any ideas?
#1473 of 2180 Re: Ford F350-Front end vibration [rsett]
Sep 01, 2005 (11:30 am)
If you manually turn your locking hubs on it should go away..One at a time will show you which hub is bad. Either wheel bearing or shaft is bad.
#1474 of 2180 460 motor ? HELP
Sep 01, 2005 (2:03 pm)
I have purchased a 1984 F-350 with an unknown motor ( ran good and was cheap) It has a factory Holly/ motorcraft 4 bbl. How can I tell what motor I have ? There are no ID. tags, plates, or numbers anywhere Some one said they heard of a 351 modified coming with a 4 bbl.">
#1475 of 2180 Re: 460 motor ? HELP [partsman]
Sep 02, 2005 (11:11 am)
Thanks anyway I guess everyone is watching the disaster on T.V. It's a 460