GMC Sierra/Chevy Silverado 2500 & 3500 - II - READ ONLY

1057 messages, Last post on May 12, 2002 at 4:56 PM

You are in the Pickups - Archived Discussions Forum. Your Host is kcram

This discussion is ARCHIVED. To reactivate the discussion, post a request in the Lost? Ask the Pickups Host for directions! discussion.

What is this discussion about? GMC Sierra 2500, GMC Sierra 3500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, Truck

Outline

Messages Page 101 of 107: 1; ...; 98; 99; 100; 101; 102; 103; 104; ...; 107; Prev; Next; Last

#994 of 1057 tires by trw3 Nov 30, 2001 (4:31 am)
BFGoodrich M/T 255/85/16 on the stock alloys 33.3 dia. works great! 01 GMC 2500HD slt cc 4x4
#995 of 1057 Suspension sag..... by markbuck Dec 03, 2001 (1:25 pm)
All suspensions are designed to work best with 1/4 to 1/3 of their travel used up with "static sag". If you crank your torsion bars up to less than 1/4 of the travel, then you compromise handling... When the road drops away (in a bump) then the tires don't travel far enough down to maintain their connection to the road. So, if handling is not important, go ahead, crank them up....
#996 of 1057 dash mount cupholder by y2kgmc Jan 07, 2002 (6:07 pm)
Does anyone know part # and if it is possible to put cupholder in spot below lighter on 2001 2500HD ext cab, the seat mounted cupholders are kinda low..... Thanks Ed
#997 of 1057 Y2 by sonjaab Jan 07, 2002 (7:16 pm)
Heck yea ! Ask over in the silverado topic here...A few guys have done it and have pix and stuff......... BTW: My 01 2500 has been wonderful and plowing snow like a champ since we finally got snow in NY..........Geo
#998 of 1057 GM Customer Service OK With Me by whatsachevy Jan 15, 2002 (7:28 pm)
'01 Chevy 2500HD 4x4 Ext Cab SB 6.0/4.10 Auto Locker - 12,000 miles and only a slight engine knock on cold start-up. Other than that, no problems. I have to admit, so far this truck is awesome (and no, I don't work for GM - I'm actually an old Ford guy - this is my first Chevy product, ever). I did take the truck in to my dealer to register the engine knock. I was told the same story as most that engine longevity would not be compromised. I did note the engine knock concerns on the service follow-up questionnaire that I mailed back to GM in December. I received a phone call last night from GM rep. They asked about my concerns and called me back tonight. They gave me a no-cost 5-year/100,000 mile extended warranty on the engine and all internal engine components. They agreed to replace the pistons when the newly designed ones are available at no cost allowing the extended warranty to continue in effect. Maybe some people should look for another dealer or call GM customer service directly (1-800-222-1020). Personally, I don't think the longevity of the engine is compromised, and was quite pleased that GM took the time to call me and apparently stand behind their product. I have a buddy who has a '97 GMC 1/2-ton that has been through hell and back several times (it has even been buried in a pond with water up to the bottom of the dash). His truck has also had the cold-engine start-up knock since about 5,000 miles. He now has over 90,000 miles with no oil consumption (but he does still have the same knock - it has not gotten worse over time). 90,000 miles on a truck for him should be worth at least 180,000 for a normal person as we consider him to be "above-average hard" on vehicles. BTW - with all this talk of bigger tires, has anyone ever ran Cooper tires? Cooper makes a mud tire that looks pretty aggressive, similar to the BF, but quite a bit cheaper than the BF. I just purchased American Racing 16x8 rims and am now shopping for mud tires (285/75/16). I was wondering if anyone has any experience with Cooper tires and what their opinion of them was.
#999 of 1057 tires by owenm1 Jan 16, 2002 (4:08 am)
I just got the Dunlop 265-75R-16's Radial Rover Rover RT's, great tire! I'll send a pic, just email me at: omcniffyahoo.com I have the GMC 2500HD w/8.1 4x4
#1000 of 1057 OWEN by sonjaab Jan 16, 2002 (8:26 am)
Are you still in Korea ? Must be nice having the ONLY 2500 there (Civilian). New tires already? Mine workin hard plowing snow at the moment !...................Geo
#1001 of 1057 dash mounted cup holder by sf0383 Jan 16, 2002 (11:17 am)
I don't have the part number in front of me, but I did put one in My 2001 2500HD and it works perfect. I'll try to find the number and post.
#1002 of 1057 Dash Mounted Cup Holder by sf0383 Jan 17, 2002 (7:20 am)
I looked on the cup holder this morning and got three sets of numbers. 34-9-36224, 40700ASM and 15753265ASM. I am trying to remember that the last number is the part number I used but I honestly can't remember. Try to get it somewhere other than a dealer and you will save yourself some money.