You are here: Forums Pickups Chevrolet Silverado & GMC Sierra GMC Sierra: Problems & Solutions 

GMC Sierra: Problems & Solutions - READ ONLY

1492 messages,  Last post on Oct 12, 2006 at 5:32 AM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Truck

Messages Page 120 of 150 1 ... 117 118 119 120 121 122 123 ... 150 Prev Next Last

Go To Msg # Search This Discussion

#1186 of 1492 ????help???? by cacksalot Oct 12, 2005 (10:57 am)
My 91 gmc 1500 is having some problems i have replaced the fuel pump fuel filter checked the battery wires fuel injectors and everything else yet it still dies on me whwn i get it started, and thats if i even get it started any suggestions please. Replies to this message: gmctruck (Oct 12, 2005 4:48 pm)
#1187 of 1492 Re: Plastic Trim Maintenance [edsview] by gmctruck Oct 12, 2005 (4:41 pm)
Replying to: edsview (Oct 12, 2005 5:57 am) There is a product called 303 Aerospace Protectant that will restore the black plastic to like new condition. It won't harm the paint and you can use it on the dash and many other plastic or vinyl surfaces. Plus it contains no silicone and offers UV protection. You'll need to apply it about once a month, but it does the job and you won't need several different products to detail your truck. You can find 303 at RV/Marine supply stores and I think some auto stores carry it now, or you can always order it online also. Replies to this message: edsview (Oct 19, 2005 5:06 am)
#1188 of 1492 Re: ????help???? [cacksalot] by gmctruck Oct 12, 2005 (4:48 pm)
Replying to: cacksalot (Oct 12, 2005 10:57 am) Did you check the coil? Is the EGR valve sticking? It's hard to remote diagnose, but you just have to check out one system at a time until you find the problem. It might be worth it to buy a Haynes manual to help you with diagnostic testing so you don't waste money buying parts you don't really need.
#1189 of 1492 Re: No Start, Fuel and spark [campitelli] by weels Oct 12, 2005 (7:53 pm)
Replying to: campitelli (Oct 11, 2005 5:50 pm) Do you know for sure that the injectors are indeed squirting? I haven't dealt with this on a vortec yet, but my older throttle body truck did that and it ended up being a fuse or relay for the injectors. I had fuel pressure and all, but they wouldn't squirt. No trouble codes eh? - Tim
#1190 of 1492 No Power or Electrical at Cold Start-Up by foch Oct 13, 2005 (11:10 am)
2000 GMC 2500 6.0L - On occasion when cold starting I insert the key into the ignition and attempt to start the truck and there is no power or voltage to any device in the truck - totally black. After removing the key and re-inserting it and trying again, some dash lights flicker and after another attempt or so finally the head lights and all other devices appear to work and the truck starts. Usually associated with this is tough starting and the need to keep my foot on the accelerator to keep the truck running. After idling for a while I can shut the truck off and let sit for a minute and re-start the truck with no problem. I also have the typical GMC fuel gauge problem but a new battery seem to have helped with this. Any help would be most appreciated. Replies to this message: weels (Oct 14, 2005 8:44 pm) foch (Oct 21, 2005 9:29 am)
#1191 of 1492 Re: No Power or Electrical at Cold Start-Up [foch] by weels Oct 14, 2005 (8:44 pm)
Replying to: foch (Oct 13, 2005 11:10 am) All my gm trucks have done that through the years when we have a Brutal cold morning like 30 below or so. My '04 hasn't had a morning like that yet here in upper NY. Where are you from? I used to put a coolant heater in the lower hose and plug 'em in for the night if we expected a night like that. I seem to remember the brand name of "katz"? Also I would turn the headlights on for a few seconds, put the key to on and wait a little before cranking it. They used to have the electric dipstick heater which I would avoid. I have a heavy duty magnet with a heater that you stick on the block if there's room for it. The '05 oil pan is aluminum so you can't use it there. Of course there's always the factory block heater if your truck was so equipped. Its a drag that winter's almost here again.  - Tim Replies to this message: foch (Oct 21, 2005 9:29 am)
#1192 of 1492 Weird Electrical Problem by slindem Oct 16, 2005 (4:26 pm)
This one has got me puzzled. My 1995 GMC Sierra SL truck will die when I open the hood. It will also not start with the hood up. A few details that go along with this problem include; lights dim during braking and when turn signals are activated, during braking charging system very close to the negative red zone. I have replaced the battery and alternator, to no avail (I hate throwing parts at a problem). Initially believed I had a bad hood light, so I disconnected it and then the truck would not start till I hooked it up again. So I guess my question is, do I have a bad ground thats causing all these problems? And if so, how in the world do I find it? thanks Replies to this message: weels (Oct 16, 2005 7:12 pm)
#1193 of 1492 Re: Weird Electrical Problem [slindem] by weels Oct 16, 2005 (7:12 pm)
Replying to: slindem (Oct 16, 2005 4:26 pm) Definately a short or short to ground. Persaverance is all I can say, start tracing all the circuits effected one by one from load to source till you find it. An ohm meter will help out a lot. Good luck. - TC
#1194 of 1492 Re: Clunking noise near Drivers seat when shutting down [weels] by weels Oct 17, 2005 (6:51 pm)
Replying to: weels (Sep 08, 2005 6:31 pm) I took the truck to the dealer today and had Mr. Goodwrench take it for a spin with me. They ended up replacing the intermediate steering shaft ( right out of the boot at the firewall) I took it out in the field (thats where I always hear the noise) and so far - so good. They covered it under warranty.  - TC
#1195 of 1492 Can I wire in snow plow lights to my 2005 GMC. by sortboy Oct 16, 2005 (5:41 pm)
I have a 2005 GMC 2500HD. I am installing a snow plow and am told that I can not hook the snow plow lights up by tapping into the the wiring. I am told that I have to buy a module to control the plow lights. The computer and day time running lights will screw up if I tap in. One plow dealer said that GMC had used a positive grounding system but had problems with it and switched back to neg. ground.????? I never herd of that. Does anyone have info on this? Replies to this message: geo9 (Oct 17, 2005 6:07 am) sortboy (Oct 17, 2005 4:42 pm) geo9 (Oct 19, 2005 6:05 am)

Messages Page 120 of 150 1 ... 117 118 119 120 121 122 123 ... 150 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet Silverado & GMC Sierra GMC Sierra: Problems & Solutions